Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹30.7 LAccepted-AOC 14 VEDRAJ COMPLEX GAUTAM BUDH MARG LUCKNOW LUCKNOW UTTAR PRADESH 226018 | LUCKNOW | UTTAR PRADESH | 226018 | 1 | Accepted-AOC L-1 | |
| 2 | 2₹33.5 L+₹2.1 L (6.78%)Rejected-Finance | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹33.9 L+₹2.5 L (8.01%)Rejected-Finance | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹34.1 L+₹2.7 L (8.71%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | 4 | Rejected-Finance Being other than L-1 | |
| 5 | 5₹34.4 L+₹3.0 L (9.71%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | 5 | Rejected-Finance Being other than L-1 |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
14 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST LUCKNOW
GE EAST LUCKNOW
SPL REPAIR TO BLDG. NO J-3 AND J-6 (JCOs MD ACCN) AT NEW SHEA LINE UNDER GE (EAST) LUCKNOW
2022_MES_518481_1
GE/E/LKO/T-94 of 2021-22
Open Tender
Civil Works
Item Rate
180 days
GE EAST LUCKNOW
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE EAST LUCKNOW
₹77,000
Yes
20 Jun 2022
16 Apr 2022
16 May 2022
16 Apr 2022
14 May 2022
1 May 2022
60 days
Amount
Taking down cement or cement lime plaster on brick or stone walls, etc any description complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
M&L for 10mm thick cement plaster on brick work or concrete surfaces in CM 1:6 finished even and smooth complete all as specified and directed
M&L for 15 mm thick rendering in CM 1:4 on external surfaces of walls & chajja/roof/ceiling facia at any height mixed with liquid water proofing compound as per manufacturer's instructions surface finished even and smooth without using extra cement complete all as specified and directed. (Note:- WPC shall be measured and paid 'seperately only')
M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface complete all as specified and directed .
Dismantling floor,hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic joint free coloured tiles in vertical surfaces 600x300x7mm thick, set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for coloured non skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.
M&L for non skid ceramic (coloured) tiles of 7-8 mm (square or rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed CM 1:4 complete all as specified and directed.
All as per item No 09 but on skirting
Taking down chowkats with shutters not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.
Taking down shutter exc. 1 sqm and not exc . 2 sqm each complete all as specified and directed.
S&F pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling cement concrete type B-1 (1:3:6) filling and compaction in frame complete all as specified and directed.
All as per item No 14 above but size 125x60mm
M&L for 30 mm thick flush shutters, solid core construction, with block board 3 core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for second class hardwood glazed and skeleton door shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc and fitted to chowkats complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) aluminum Window sliding type three track with glazed and gauzed shutter (including stainless steel wire cloth 0.36 mm nominal dia and 1.40 mm apreture and 3.8 mm thick plain glass) on wheel consisting frame of size 100mm x 44mm (1.5mm thick) (sliding shutter consist of suitable size of section as specified and directed) with locking arrangement as approved fixed with rubber gasket and aluminum beading etc including necessary cutting hole in wall complete all as specified and directed. (Note-glazed shutters glass thickness not less than 3.8 MM and wiremess shutter with SS wiremesh as approved by GE is also included. No payment will be made separately)
S&F powder coated (minimum thickness of powder coating 50micron)aluminum ventilator (louvers) with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings including 3.8mm thick glass and stainless steel wiremesh of 0.36mm including necessary fixing arrangement complete all as specified and directed.
M&L for mild steel 300mm ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed.
M&L for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed.
S&F aluminium handles cast type anodised of 150mm complete all as specified and directed.
S&F 100 mm size butt hinges, stainless steel, complete all as specified and directed.
S&F of factory made Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid uPVC foam with homogenous finecellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed.
S&F of factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.
M&L for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100 mm long, type B-21 complete all as specified and directed.
S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
Demolition of reinforced cement concrete of any position, any height, and any description not otherwise specifically provided for complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
S&F (TMT bars) 10mm dia and over cut to length, bent to shape etc. including cranking and binding with M.S wire not less than 0.9mm dia complete all as specified and directed.
M&L for RCC 1:2:4 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors roofs, landing, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for 20 mm thick granite for (of any type) machine cut and polished in steps, jambs, pillar window cill, cooking plateform etc laid over 20 mm thick screed bed in CM 1:4 , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair stainless steel kitchen plate rack wall mounted of overall minimum size 750x600mm and 250 mm deep, with partition for small/large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and CP steel screws complete all as specified and directed. Note:- Weight of rack shall not be less than 3.8 kg.
S&F in repair vitreous china wash squatting pattern closet 'Orissa pattern' white, size 580 x 440mm with S or P trap, integral foot rests, with and including PVC low flushing cistern 10 litre capacity white with all fittings, fixtures including brackets and 32mm bore PVC flush pipe complete all as specified and directed.
S&F in repair vitreous china wash basin white (flat back or angle back ) type of size 550mmx400 mm including brackets,brass cromium plated waste fittings and pvc wast pipe including cutting for and pinning in ends of bracket complete all as specified and directed.
S&F in repair of CP bib tap long body pattern with flange/cap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes 15mm bore complete all as specified and directed.
S&F in repair CP pillar tap, push type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure fancy type with long shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.
S&F in repair stop cock /angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes 15mm bore complete all as specified and directed.
S&F in repair 15mm dia concealed stop valves concealed type CP with fancy type,chromium plated with long shank and cup, complete all as specified and directed.
S&F in repair PVC connections, 450mm long with brass CP/PTMT nuts suitable for connecting 15mm bore pipes, superior quality complete all as specified and directed.
S&F for brass chromium plated shower rose 65 to 90 mm size with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed.
S&F in repair 20 to 25mm bore PVC Coated fancy type curtain rod with fixing brackerts, stops, rollers etc complete allied fitting complete all as specified and directed.
S&F repair tubular towel rail, brass chromium plated 20 mm dia ,D type, 60 cm long between flanges complete all as specified and directed.
Supply only sheet glass shelf assembley consisting of 5.5 mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.
Demolition and breaking up 75 mm dia and above drain pipe( Salt glazed ware, AC,PVC or Reinforced concrete) set in CM complete all as specified and directed.
M&L for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed..
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed..
S&F steel water tubes medium grade, galvanised with all fittings 15mm bore fixed complete to concilled in walls and ceiling or laid in floors including taking down old pipes complete all as specified and directed.
S&F steel water tubes medium grade, galvanised with all fittings 20mm bore fixed complete to walls and ceiling or laid in floors trenches including taking down old pipes complete all as specified and directed.
S&F steel water tubes medium grade, galvanised with all fittings 25mm bore fixed complete to walls and ceiling or laid in floors trenches including taking down old pipes complete all as specified and directed.
Dismantling water tanks capacity exc 250 & not exc 500 ltrs, and removing to site complete all as specified and directed..
S&F rotational in repair moulded polyethylene water storage tanks 500 litre capacity, white colour, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S&F 25 mm PTMT float valve, high pressure with Polythene floot and flynut complete, screwed for Iron pipe etc complete all as specified and directed.
S&F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm dia complete all as specified and directed.
S&F PVC kitchen cabinet/cupboard shutter, including solid PVC frame (Single Rebated) of size 60mm x 30mm, shelves made of 18mm thick one side decorative lamination & other side balancing lamination Sheet & provision of shutters made out of 18 mm thick one side decorative laminated PVC Sheet all required brackets SS screws etc. The Panels shall be fabricated using adhesive and screws Where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 900 edge bent finish complete all as specified and directed.
M&L for preparing new untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.
M&L for preparing new steel or iron surfaces of any description, exc 10cm in width or girth and two coats of synthetic enamel Paint over a coat of red oxide primer complete all as specified and directed.
M&L for one coat of painting with synthetic enamel paint on old steel surface (previously decorated ) including preparation of surfaces complete all as specified and directed.
M&L for one coat of synthetic enamel painting including preparation of old wooden surface over 10 cm width or girth complete all as specified and directed.
M&L for preparation and applying two coats of oil emultion distemper on new plastered surfaces complete all as specified and directed.
M&L for preparation and applying three coats of white wash on new plastered surface of wall complete all as specified and directed.
M&L for prparation and applying two coats of cement base paint over a coat of cement primer on new plastered surface of wall complete all as specified and directed.
M&L preparation and applying two coat of white wash on new plastered surface of ceiling complete all as specified and directed..
Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depression of scrapped surfaces with putty and applying two coats of oil bound distemper complete all as specified and directed.
M&L for two coat wall care putty on wall complete all as specified and directed
M&L for preparation of old decorated surfaces by brooming down or steel wire brushing,scrappingdown smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of ceiling including cornices,pilasters etc and applying one coats of white wash complete all as specified and directed.
Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depression of scrapped surfaces with putty and applying two coat of cement base paint complete all as specified and directed.
M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed.
Supply only liquid water proofing compound, ISI Marked complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified and directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).
Dismantling brick tiles or terracing tiles, single layer of roofs complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Taking down existing treatment any type/any thickness on roof including taking down/removing the backing bed concrete if any and dispose off at a distance exc 100m complete all as specified and directed
M&L for brushing neat cement slurry with 3.0 Kg./Sqm over roof slab complete all as specified and directed
M&L for PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof padding/ roof kerbs / benching / coved fillets etc rounded or chamfered on edges, complete all as specified and directed.
M&L for roof/sunkn treatment with polymeric water proofing membrane with specification as under:- (a) M&L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 LTRs /Sqm and allow to dry (c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (e) Applying a coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqm (f) Applying aluminium paint over bitumen coat as directed.
Taking down loose filling of aggregate in any form from sunken slab and refiiling after treatment complete all as specified and directed..
M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in mass concrete of floor etc complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all of quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in CM 1:6 complete all as specified and directed.
M&L for brick work with fly ash brick using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:4 in half brick thick wall complete all as specified and directed.
S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete all as specified and directed.
M&L for magnet ball catcher for cup board shutters complete all as specified and directed..
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.
Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.
All as per serial item No 95 here-in-before but one bell point controlled by one bell push, 06 Amp.
All as per serial item No 95 here-in-before but one, two way light point controlled by two, two way switches, 06 Amp.
All as per serial item No 95 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.
All as per serial item No 95 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.
All as per serial Item No 95 here-in-before but point wiring with 2.5 sqmm single core FRLS cables and earth continuity wire of 1.5 sqmm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.
S&F switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.
S&F switch piano flush type, 06 Amp, single pole, two way, 230 volt complete all as specified & directed.
S&F bell push, flush type, 06 Amp, 230 volt complete all as specified & directed.
S&F socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.
S&F switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.
S&F ding dong bell, AC, 230 volt, single pole complete all as specified & directed.
S&F electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.
S&F lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.
S&F in replacement of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 9/10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed.Make :Philips, Cat No : 30575 (Comet), Havells, Cat No : LHDL06160099 (CITY 3).
S&F in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed. Make : Crompton, Cat No : LBHE-10-CDL , Havells, Cat No : RUGBYNEONFT10WLED760SSYMBOPC or PHILIPS Cat no WT202WLED6SCWPSUS2PC
S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC or Philips cat no TMC 501P1XT-LED22W P 3241
S&F in replacement of single side connection LED T8 tube light rod 8 Watt, 6500K of two feet long into and including LED tube light fixture of two feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed.Make : Crompton, Cat No : DMLN1LT8-8& LT8-8-865-2 or equivalent in havells / Philips as approved GE.
S&F ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
Taking down carefully ceiling fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody of AGE E/M Yard-II and refixing after repair complete all as specified & directed.
M&L for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
M&L for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
S&F in replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
S&F in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
S&F in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos.
S&F in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
S&F in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
M&L for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.
Taking down electric meter and refixing on same board after rewiring complete all as specified and directed.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .