Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹8.2 CrAdmitted-Finance | +24.96% | ₹8.2 Cr | L1 | Admitted-Finance |
Tender Value
₹6.6 Cr
EMD Value
₹13.2 L
Closing Date
19 May 2025, 6:00 pmClosed
Executive Engineer-8
EE-8, Room No. CB-201B, IInd floor, CCC Building JDA
Traffic improvement work on New Sanganer road in zone-8 JDA, Jaipur
2025_JDAJP_462493_1
EE-08/04/2025-26
Open Tender
Civil Works
Percentage
180 days
Traffic improvement work on New Sanganer road
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
Secretary, JDA
₹13.2 L
Yes
30 May 2025
28 Apr 2025
23 May 2025
28 Apr 2025
19 May 2025
28 Apr 2025
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling Steel Work in all Types of Sections upto a height of 5 m above Plinth Level excluding Cutting of rivet as per MoRD Specification Clause 202.
Including dismembering | 100 | Tonne | 588.6 | ₹58,860 |
| 2 | Steel, Tar bitumen and Timber For 20 Km | 100 | MT | 141.75 | ₹14,175 |
| 3 | Building rubbish stone metal (Grit and ballast etc.)
For 10 Km. | 2,735 | Cum | 61.29 | ₹1,67,628.15 |
| 4 | Dismantling of Cement Concrete Pavements as per MoRD Specification Clause 202.
Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately | 1,597.5 | Cum | 481.5 | ₹7,69,196.25 |
| 5 | Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRD Specification Clause 202
By Mechanical Means Bituminous Courses | 1,375 | Cum | 115.2 | ₹1,58,400 |
| 6 | Pavement milling (cold planning, asphalt milling, or profiling) of existing all kinds of bituminous surfaces (Mastic, DBM, BC, SDBC, SMA, PMC etc.) with specially designed equipment up to the specified depth of bituminous layer as per designed level & grade, including disposal of milling material with all lead (minimum 20 km from site) and lift complete as per specification. The surface shall be free of bumps, ruts, and other imperfections including the arrangement of traffic diversion if required. Milling material recovered, shall be loaded directly onto trucks/trolleys from the milling machine & shall be the property of the contractor. The milled road surface shall be swept clean prior to opening to traffic. The milling machine is power-operated, self-propelled, and self-sufficient in power, traction, and stability to remove a thickness of BT surface to a specified depth. The machine should be able to provide a uniform profile and cross slope, and capable of accurately and automatically establishing profile grades along each edge of the machine by referencing from the existing pavement without damaging the bottom CC surface if any. The machine should have an automatic system for controlling grade elevation and cross slope etc. | 1,375 | Cum | 900 | ₹12,37,500 |
| 7 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRD Specification Clause 503. | 67,601 | Sqm | 9 | ₹6,08,409 |
| 8 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per MoRD Specification Clause 503. | 35,750 | Sqm | 10.8 | ₹3,86,100 |
| 9 | Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder @
4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specifications Clause 507 complete in all respects.
for Grading II ( 19 mm nominal size )
In MT | 4,483.05 | P.MT | 2,722.5 | ₹1,22,05,103.63 |
| 10 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 509 complete in all respects
for Grading-II (13 mm nominal size) Bitumen CRMB-60 | 3,896.2 | P.MT | 3,168 | ₹1,23,43,161.6 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 14.85 MB
Tender04.pdf
Tender Documents • 14.83 MB
BOQ_829696.xls
BOQ • 0.26 MB
BOQ.xls
BOQ • 0.26 MB
Tenderdocument.pdf
Tender Documents • 14.83 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .