Loading…
Loading…
Tender Value
Refer Docs
Closing Date
22 Jun 2026, 3:00 pm5d left
SUSHIL KUMAR
EXECUTIVE OFFICER (HAJIPUR)
Rambalak chowk, Hajipur
SUSHIL KUMAR
EXECUTIVE OFFICER (HAJIPUR)
EOI FOR EMPANELMENT OF AGENCY FOR PROVIDING SKILLED MAN POWER SERVICES AS AND WHEN AND WHERE REQUIRED WITH ALL EQUIPMENTS & MACHINERIES (OUTSOURCING) FOR COMPREHENSIVE REPAIR, OPERATION AND MAINTENANCE OF URBAN WATER SUPPLY SCHEME UNDER ?PEYJAL NISCHAY YOJANA? OF NAGAR PARISHAD HAJIPUR.
133954
NPH/ NIT- EOI- 08/2026-27
Open Tender
GENERAL
Vaishali
• Bidder Name.
• Bidder address
• GST no
• Pan no
• Email-id
• Mobile no
GENERAL
ITEM RATE
L1
1
2 documents required · 2 mandatory
at the Nagar Parishad Hajipur Office
15 Jun 2026
15 Jun 2026
22 Jun 2026
16 Jun 2026
22 Jun 2026
16 Jun 2026
16 Jun 2026
FINANCIAL BID-A
NAGAR PARISHAD, HAJIPUR
NIT No: EOI 08/20206-27 Date: 08.06.2026
PERFORMA FOR SCHEDULE RATE FOR PROVIDING MAN POWER SERVICES AS AND WHEN AND WHERE REQUIRED WITH EQUIPMENTS AND MACHINERIES FOR OPERATION AND MAINTENANCE OF URBAN WATER SUPPLY SCHEME NAGAR PARISHAD HAJIPUR.
Sl.No Component of Rate Statement Rated Quoted by bidder( written both in figure and word)
1 Basic wages including Variable Dearness Allowance (VDA)( Rate per person for one day) “Minimum wages” must be followed as per Govt. of Bihar Minimum wages act.
a) Operator-cum-Chowkidar- 1 no
b) Plumber (Welder) – 1 no
c) Electrician- 1 no
d) Fitter-cum-mechanic – 1 no
e) Mason – 1 no
f) Helper – 1 nos.
2 Rate for Minor Repairing(excluding manpower cost)
a) Repairing of Motor Pump per HP
i) 1HP Rate quoted by bidder (Inclusive of GST)
ii) 2HP Rate quoted by bidder (Inclusive of GST)
iii) 3 HP Rate quoted by bidder
(Inclusive of GST)
iv) 5 HP Rate quoted by bidder(Inclusive of GST)
v) 7.5 HP Rate quoted by (Inclusive of GST)
vi) 10 HP Rate quoted by bidder (Inclusive of GST)
vii) 17.5 HP Rate quoted by bidder (Inclusive of GST)
viii) 20 HP Rate quoted by bidder (Inclusive of GST)
ix) 25 HP Rate quoted by bidder (Inclusive of GST)
x) 30 HP Rate quoted by bidder (Inclusive of GST)
b) Repairing of Starter FSAD (Fully Automatic Star- Delta ) 220V,415V, 50Hz Rate quoted by bidder
(Inclusive of GST)
(i) Start Push Button
(ii) Stop Push Button Rate quoted by bidder
(iii) Voltmeter (Inclusive of GST)
(v) Contractor Rate quoted by bidder(Inclusive of GST)
(b) (b) 5HP to 10HP
(c) 15 to 25 HP
(vi) Start Capacitor Rate quoted by bidder(Inclusive of GST)
(vii) Running Capacitor
(b) 5HP to 10HP
(c) 15 to 25 HP
(viii) Push to Volt
(b) 5HP to 10HP
(c) 15 to 25 HP
(xi) Terminal Block
(b) 5HP to 10HP
(c) 15 to 25 HP
(c) Installation of New Starter (Single/Three phase of standard brand like Crompton /L&T /BCH etc.)
i) 1 HP Rate quoted by bidder(Inclusive of GST)
ii) 2 HP Rate quoted by bidder(Inclusive of GST)
iii) 3 HP Rate quoted by bidder(Inclusive of GST)
iv) 5 HP Rate quoted by bidder(Inclusive of GST)
v) 7.5 HP Rate quoted by bidder(Inclusive of GST)
vi) 10 HP Rate quoted by bidder(Inclusive of GST)
vii) 17.5 HP Rate quoted by bidder(Inclusive of GST)
viii) 20 HP Rate quoted by bidder(Inclusive of GST)
ix) 25 HP Rate quoted by bidder(Inclusive of GST)
x) 30 HP Rate quoted by bidder(Inclusive of GST)
(d) Repairing of Stabilizer Rate quoted by bidder bidder(Inclusive of GST)
(e) Restoration of Rising Main/Delivery Main (per metre) Rates based on SOR of BCD/PHED and other works department
i) G.I. Pipes 50mm dia. BCD 2022 18.12.6 572.6
ii) G.I. Pipes 65mm dia. 18.12 18.12.7 667.7
iii) G.I. Pipes 80mm dia. 18.12.8 818.02
iv) Replacing damaged portion UPVC/CPVC Pipe 50mm Dia (BCD- 2022/18.9.8) 730.03
v) Replacing damaged portion UPVC/CPVC Pipe 80mm Dia (BCD- 2022/18.9.1) 1889.5
vi) Replacing Gun Metal Gate valve 50mm Dia (BCD-2022 18.17) 878.2
vii) Replacing Gun Metal Gate valve 80mm Dia (BCD-2022 18.17) 2227.6
viii) Replacing Gun Metal ( 350mm,400mm & other Dia) Rate quoted by bidder(Inclusive of GST)
f) Repairing of Pump Chamber (per sq feet) Rate quoted by bidder(Inclusive of GST)
g) Leakage detection & repairing in distribution network ( per leakage point) Rate quoted by bidder(Inclusive of GST)
(i) Leakage detection & repairing in MDPE PIPE distribution network MDPE PIPE Rate quoted by bidder(Inclusive of GST)
(ii) Leakage detection & repairing in HDPE PIE distribution network Rate quoted by bidder(Inclusive of GST)
h) Laying of new pipes in water distribution network ( per metre) Approved Rate based on SOR of (RCD 2026) Rate(BCD-2022.18.12.)
i) HDPE Pipe 40mm (PE 100 -PN 08) (RCD 2026/2) 58
ii) HDPE Pipe 50mm (PE 100 -PN 08) (RCD 2026/2) 89.4
iii) HDPE Pipe 63mm (PE 100 -PN 08) (RCD 2026/2) 142.4
iv) HDPE Pipe 75mm (PE 100 -PN 08) (RCD 2026/2) 201.2
v) HDPE Pipe 90mm (PE 100 -PN 08) (RCD 2026/2) 284.4
vi) HDPE Pipe 110mm (PE 100 -PN 08) (RCD2026/2) 424.8
vii) HDPE Pipe 125mm (PE 100 -PN 10) (RCD2026/3) 671
viii) HDPE Pipe 140mm (PE 100 -PN 10) (RCD2026/3) 840
ix) HDPE Pipe 160mm (PE 100 -PN 10) (RCD2026/3) 1096
x) HDPE Pipe 180mm (PE 100 -PN 10) (RCD2026/3) 1392.2
xi) HDPE Pipe 200mm (PE 100 -PN 10) (RCD2026/3) 1717.6
xii) HDPE Pipe 225mm (PE 100 -PN 10) (RCD2026/3) 2168.2
xiii) G.I. Pipes 15mm dia. (BCD-2022.18.12.) 197.6
xiv) G.I. Pipes 20mm dia. (BCD-2022.18.12.) 245.4
xv) G.I. Pipes 25mm dia. (BCD-2022.18.12.) 342.2
xvi) G.I. Pipes 32mm dia. (BCD-2022.18.12.) 381.7
xvii) G.I. Pipes 40mm dia. (BCD-2022.18.12.) 476.8
xviii) G.I. Pipes 50mm dia. (BCD-2022.18.12.) 572.6
xix) G.I. Pipes65mm dia. (BCD-2022.18.12.) 667.7
xx) G.I. Pipes 80mm dia. (BCD-2022.18.12.) 818.2
xxi) Providing and laying S&S or CI standard special such as tees bend collars tapers caps etc (Heavy 7344.30(unit Quintal)/8695.60 (unit Quintal)
class) Up to 300 mm dia and over 300 mm dia (BCD-18.66)
xxii) CPVC pipes 15mm dia( including all cpvc plain and brass thread fittings ……..) (BCD-2022 18.7) 172
xxiii) CPVC pipes 25mm dia( including all cpvc plain and brass thread fittings ……..) (BCD-2022 18.7) 317.3
xxiv) CPVC pipes 32 mm dia( including all cpvc plain and brass thread fittings ……..) (BCD-2022 18.7) 395.2
i) Provision for PCC road cutting & its restoration ( cum meter) (BCD-2022 16.42) 4649
ii) Polyethylene water storage tank (ISI:12701) (BCD-2022 18.48A) 9.70 P/Ltr
(i) Ferrule replacement ( C.I. Brass ferrule with mouth cover)
i) 15mm nominal dia (BCD-2022 18.20.1) 301.6
ii) 20mm nominal dia (BCD-2022 18.20.2) 347.7
iii) 25mm nominal dia (BCD-2022 18.20.3) 447
(j) House Connection/ Stand post repairing Rate quoted by bidder(Inclusive of GST)
i)Providing and laying MDPE pipe 20mm dia nominal bore 6m with proper position including all specials by compression fitting/ electrofusion all complete. Rate quoted by bidder(Inclusive of GST)
(ii) Providing & fixing GI Pipe complete with GI fittings and clamps all complete-15mm nominal bore.(BCD-22 18.10.1) 227.7
(iii)Brass ferrule with mouth cover-15 mm nominal dia (BCD-2022 18.20.1) 301.6
(iv)Female adopter for adjoining MDPE pipe Rate quoted by bidder(Inclusive of GST)
(v) Female adopter for adjoining MDPE pipe to GI pipe Rate quoted by bidder(Inclusive of GST)
(vi)HDPE electrofusion service saddle including all complete job as per direction of E/I Rate quoted by bidder(Inclusive of GST)
(vii)Brass bib cock of approved quality :15mm nominal bore (BCD-2022 18.49) 434.2
(viii) Replacing of damaged bib cock with new bib cock (BCD-2022 18.15.1) 303.8
(viii) Plastic bib cock of approved quality: 15mm nominal bore Rate quoted by bidder(Inclusive of GST)
(k) Consumable items
1) Saddle (40mm,63mm,75mm,90mm,110mm etc of different size) Rate quoted by bidder(Inclusive of GST)
(2)Nipple (0.5 inch) Rate quoted by bidder(Inclusive of GST)
(3) Union (0.5 inch) Rate quoted by bidder(Inclusive of GST)
(4) Socket (0.5 inch) Rate quoted by bidder(Inclusive of GST)
(5)Elbow (0.5 inch) Rate quoted by bidder(Inclusive of GST)
(6) Female thread adopter (as per use) Rate quoted by bidder(Inclusive of GST)
7) Male thread adopter (as per use) Rate quoted by bidder(Inclusive of GST)
8)Tee (0.5 inch) Rate quoted by bidder(Inclusive of GST)
9)Teflon tape Rate quoted by bidder(Inclusive of GST)
10)Plug(0.5inch) Rate quoted by bidder(Inclusive of GST)
11)Solvent (180ml) Rate quoted by bidder(Inclusive of GST)
12)Clip(0.5 inch) Rate quoted by bidder(Inclusive of GST)
13)Mechanical jointer (20mm, 40mm,50mm,63mm,90mm,110mm) Rate quoted by bidder(Inclusive of GST)
l) Providing new house connection from water supply distribution line all complete as per standard Rate quoted by bidder(Inclusive of GST)
m) Restoration work of Check Valve/ Stop valve/ Gate Valve Rate quoted by bidder(Inclusive of GST)
n) Repairing of gate valve chamber / Sluice valve chamber in respect of distribution network Rate quoted by bidder(Inclusive of GST)
o) Repairing of OHT/PVC Tank (per litre capacity) Rate quoted by bidder(Inclusive of GST)
p) Cleaning of OHT/PVC Tank (per1000 litre ) Rate quoted by bidder(Inclusive of GST)
q) Repairing in Water Meter in OHT (PWS) Rate quoted by bidder(Inclusive of GST)
r) Repairing of steel/RCC Staging structure work (per kg steel) Rate quoted by bidder(Inclusive of GST)
s) SCADA /IoT repairing & restoration Rate quoted by bidder(Inclusive of GST)
t) (1)For CI Pipe for 75mm, 100mm,150mm, 200mm, 250mm, 300mm,
(i) For CI Pipe for 75mm, (per meter) Rate quoted by bidder(Inclusive of GST)
(ii) For CI Pipe for 100mm, (per meter) Rate quoted by bidder(Inclusive of GST)
(iii) For CI Pipe for 150mm, (per meter) Rate quoted by bidder(Inclusive of GST)
(iv) For CI Pipe for 200mm, (per meter) Rate quoted by bidder(Inclusive of GST)
(v) For CI Pipe for 250mm, (per meter) Rate quoted by bidder(Inclusive of GST)
(vi) For CI Pipe for 300mm, (per meter) Rate quoted by bidder(Inclusive of GST)
(i) For CI Pipe mechanical Jointer / Flange for 75mm, (per Piece ) Rate quoted by bidder(Inclusive of GST)
(ii) For CI Pipe mechanical Jointer / Flange for 100mm, (per Piece) Rate quoted by bidder(Inclusive of GST)
(iii) For CI Pipe mechanical Jointer / Flange for 150mm, (per Piece) Rate quoted by bidder(Inclusive of GST)
(iv) For CI Pipe mechanical Jointer / Flange for 200mm, (per Piece ) Rate quoted by bidder(Inclusive of GST)
(v) For CI Pipe mechanical Jointer / Flange for 250mm, (per Piece) Rate quoted by bidder(Inclusive of GST)
(vi) For CI Pipe mechanical Jointer / Flange for 300mm, (per Piece) Rate quoted by bidder(Inclusive of GST)
(2) Repairing of sluice valve (of different diameter) C.I. pipe
i) 80 mm Rate quoted by bidder(Inclusive of GST)
ii) 100 mm Rate quoted by bidder(Inclusive of GST)
iii) 150 mm Rate quoted by bidder(Inclusive of GST)
iv) 200 mm Rate quoted by bidder(Inclusive of GST)
v) 250 mm Rate quoted by bidder(Inclusive of GST)
vi) 300 mm Rate quoted by bidder(Inclusive of GST)
(3) Repair of damaged house service connetion with social certification such as ensuring proper saddle/ferrule, MDPE Pipe with proper cover and support to bib-cock. Repairing should be addressed in such a way that no complain will come from that place/location in next 60 days Rate quoted by bidder(Inclusive of GST)
(4) chemical for chlorination Rate quoted by bidder(Inclusive of GST)
Any other ( please specify)
3 Rate for Major Repairing (excluding manpower cost) Based on estimate by Urban Local Body
a. Installation of new boring in case of bore failure and networking with raising main
b. Installation work of new Motor Agency shall quote discount in percentage based on estimated cost ( estimate will be prepared based on work as per latest SOR)
c. Construction/Installation of new Steel/RCC staging
d. Installation of additional OHT/PVC Tank
e. Extension of distribution network along with house connection
f. Restoration of damaged pipeline more than 100m length during natural clavity
g. Change of filter media of IRP as per manufactures guideline
h. Installation of new electric transformer
i. Any other major work related to Water Supply Scheme not mentioned above
4 Equipment Rate per hour
(excluding Labour Cost)
Sl. Equipment (Including Fuel and all types of manpower and other charges)
1 Backhoe Loader (JCB) (Per Hour) Rate quoted by bidder
2 Skid Loader (Per Hour) Rate quoted by bidder
3 Crane (Per Hour) Rate quoted by bidder
4 Jack Hammer(Per Day) Rate quoted by bidder
5 Pump Set (Per Hour) Rate quoted by bidder
6 Tractor (Per Hour) Rate quoted by bidder
7 Any other Rate quoted by bidder
5 Total Cost for a day 1(a)+1(b)+1(c)+1(d)+1(e)+1(f)
6 Total Agency Service Charge( Including Vehical Service for a day) Rate quoted by bidder
7 Total Cost of Service for a day(Bidder should quote rate in rupees as a service charge for a day of mentioned work above) Sl. No2 + Sl.No-4+ SI No-5+ SI No-6
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
EOI NP Hajipur (Final) 08.pdf
NIT • 1.10 MB
EOI NP Hajipur (Final) 08.pdf
NIT • 1.10 MB
NIT EOI 08.pdf
NIT • 0.27 MB
EOI 08 paper cutting.pdf
NIT • 0.91 MB
Financial Bid sheet (BOQ) NPH.xlsx
NIT • 0.03 MB
Download all tender documents and submit your bid