Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹13.6 LAdmitted-Finance | -20.00% | ₹13.6 L | L1 | Admitted-Finance |
Tender Value
₹17.0 L
EMD Value
₹33,924
Closing Date
23 Apr 2026, 3:00 pmClosed
Executive Engineer WD-I
o/o Executive Engineer WD-I DDW, St. Inez, Panaji
Maintenance of W.S.S in Shiroda Constituency - SITC of submersible pump and control panel at Sakharwal sump and Laying of 90mm PVC distribuition main from sakharwal to pazz moll.
2026_DDW_28654_1
DDW/DI/ASW/03/26-27 Line3
Open Tender
Civil Works - Water Works
180 days
Panaji
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
₹33,924
11 May 2026
13 Apr 2026
24 Apr 2026
13 Apr 2026
23 Apr 2026
13 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, installation, testing and commissioning of water lubricated submersible pump set. Designed deliver discharge head as detailed below. The pump shall be suitable for installation in a open well. The pumpset shall be supplied with pump motor coupling, stainer and built in non return valve. The pumpset shall be suitable to operate on 390- 440V, 3phase/50cycles per sec. A-C electricity supply, The submersible pumpset shall have the impellers of bronze and the pump shaft and shaft sleeve of stainless steel and pump casing bowls.suction and discharge casing shall be of cast iron GR260 or IS 210. The submersible pumpsets shall be strictly conforming to IS 8030/1976 with ISI mark. The submersible pumpset shall be CRI make or equivalent of 12.5HP The pumpset shall be suiting for vertical multistage pump. Vertical openwell submersible pump Model- CV- 46 Power- 10HP (6stage) Head - 103 Mtrs Flowe- 8LPS @ 75mtrs Pipe size- 65mm Make- CRI pumps | |||||
| 2Supplying, installation, testing and commissioning of outdoor box type control panel board fabricated out of MS plate with thickness of 3mm openable double door in one side with suitable locking arrangement including transparent glass for facilating easy meter readings and closed in all the three remaining sides with upper side with sloping roof fabricated out of MS sheet in Charge. The size of the panel board shall be 3 ft x 2 ft. x 1ft. provided with plywood and asbestos cement sheet 10mm thickness. The Panel board shall be mounted on MS angle iron frame, each consisting of ISA 4040 x6mm- 2nos. raised to a height of 3ft. height measured from the ground level including cost of excavation, rubble packing 200mm thick and cement concrete bedding with cement concrete 1:2:4( 1cement : 2coarse sand: 4 graded granitic or basaltic stone aggregate 20mm nominal size) . | |||||
| 3Earthwork in excavation in all types of stratas comprising any of the materials such as soil, silt, sand, clay, gravel, moorum of all varities, shingles, pebbles all types of conglomerates, laterite rock, soft rock, ordinary rock, disintegrated rock, fissured/Shuttered / decomposed rock or weathered rock and all such other materials described under Appendix-A to those specifications either in full or in parts as the case may be, adopting any approved method or methods as may be convenient or permitted, inclusive of chiselling/wedging etc. in all conditions such as dry, moist, saturated, submerged foul conditions etc. and as directed by the Engineer-in-Charge etc. All complete in foundation, pipeline trenches, drains not exceeding 1.50 mts. width 10 sq.m. on plan including dressing of sides ramming of bottoms including getting out the excavated soil and disposal of surplus soil for all leads & lifts including providing barricading, danger lighting, guarding as directed by the departmental officer. | |||||
| 4Supplying at store or site of work including loading, unloading and stacking at site PVC (RING FIT) pipes with elastomeric sealing ring (one per pipe) and with rubber ring socket, conforming to to IS:4985-2000,and bearing ISI mark Class 10 kg/sq.cm. | |||||
| 4.01 | Outer Dia in mm | - | - | - | - |
| 4.02 | a) 90mm dia | - | Metre | - | - |
| 5Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. galvanized mild steel continuous weld tubes conforming to IS:1239 (part II) 1975, with latest amendments, screwed at both the ends as per IS: 554-pipe threads, one end fitted with socket other end with plastic protection ring at random length 4-7 metres. | |||||
| 5.01 | Class B | - | - | - | - |
| 5.02 | Nominal Diameter in mm | - | - | - | - |
| 5.03 | a) 80mm dia | - | Metre | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
Tendernotice_2.pdf
PDF • 0.07 MB
Tendernotice_3.pdf
PDF • 0.04 MB
BOQ_29093.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid