Improvement works to Primary Health Center at Kalveerampalayam in ward no 38 West Zone.

Amount

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds o rock and boulders exceeding 0.014 c.u.m. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction o Engineer-in-charge.

Cement concrete 1:4:8 (one cement, four sand and Eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted, etc., complete complying with standard specification.

Supply and filling with well gravel layer by layer including watering ramping etc complete

Fly ash brick work in CM 1:5 (one cement & five sand) using size 9''x4 3/8''x2 3/4'' including finishing curing etc complete complying with standard specification

Ground floor

Weathering course in concrete broken stone brick jelly 20mm size in pure slacked lime over RCC slab. The proporatio being 32:12:5 for required slope and the thickness of as required and well beaten with wooden beaters etc completed -10 m3

Terrace flooring with one couse of pressed tiles of size 23x23 in cement mortar 1:3 mix with impermo oil 2% by weight of cement and pointed with same oiled mortar

Plastering with cement mortar 1:3 mix (one cement and five sand) 12mm thick

Plastering with cement mortar 1:5 mix (one cement and five sand) 12mm thick

Flooring finishing with first quality design ceramaic tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc. complete - 10 m2

Daddoing the walls with first quality approved colour glazed tiles with printed design of 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., comelete - 10 m2

Painting two emulsion paint two coats overa priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Painting wooden work for doors, windows, ) grills, weld mesh sceens etc., two coats etc complete

Wiring with 2 x 1.5 sq-mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC | accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points ser coil

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in flush with wall with 150mm x 100mm x 75mm MS switch box with 3mm thick hylum sheet cover for SA 3pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fittin with tube

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor 0 1100V grade insuitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed ortion wilth suitable colour

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB tn flush with wall with earth connection (For AC Plug) Legrand and MDS Hager L&T Make

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existin clamp

Supplying and fixing in position of Indian make white water closet of size in 580mm * 440mm weight glassed earthan ware o approved with P Trap (or) S Trap foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in cm. 1:3 12 mm thick including fixing in position levelling complete with necesary connection as per standard specification

Solid PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fix in position including necessary furniture and fittings. The cover all size of top rail, Lock rail and bottom rail shall be 70mm x 45mm, with suitable rebate for housing the shutter.

Supplying and laying TAMIN paver block providing and laying of 60 mm thick high strength tybe conforming IS 15658 - 2006 o TAMIN paver biock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below | the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub pase, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers sweeping transporting loading unloading of laying paver block as per standard specification

AMMAN BUILDERS (BID ID -1252275)