Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹94.9 LAccepted-AOC 4 6 1 KALABAIRAVANKADU AYAKKARANBULAM II VEDHARANYAM TALUK NAGAPATTINAM DISTRICT 614707 | AYAKKARANBULAM | NAGAPATTINAM | TAMIL NADU | 614707 | 1 | Accepted-AOC Lowest Quoted Bidder, Hence Accepted | |
| 2 | 2₹1.0 Cr+₹3.7 L (3.75%)Rejected-Finance NO 1 PUDHU STREET NAGAPATTINAM TALUK DISTRICT 611001 | NAGAPATTINAM | TAMIL NADU | 611001 | 2 | Rejected-Finance Second Lowest quoted Bidder, Hence Rejected | |
| 3 | 3₹1.0 Cr+₹4.7 L (4.85%)Rejected-Finance R S MAIN ROAD MANALI POST THIRUTHURAIPOONDI TALUK TIRUVARUR DISTRICT 610210 | 610210 | 3 | Rejected-Finance Third Lowest quoted Bidder, Hence Rejected |
Tender Value
₹94.9 L
EMD Value
₹57,500
Closing Date
21 Feb 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
Office of Superintending Engineer, PWD, Buildings C and M Circle, PWD Campus, Tiruvarur-1.
Provision for Basement floor, OTS drainage and Additional Amenities for the Construction of Combined Court Building at Nagapattinam in Nagapattinam District.
2024_PWD_425400_1
32-02/ BCM/TVR/2023-24
Open Tender
Civil Works - Buildings
Lump-sum
90 days
Nagapattinam
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹57,500
4 Mar 2024
15 Feb 2024
22 Feb 2024
15 Feb 2024
21 Feb 2024
15 Feb 2024
Amount
Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers.
Supplying and erecting shuttering including necessary supports for plane surfaces which require nominal strutting for RCC column footings, grade beam, plinth beams, stair case steps, etc. using mild steel sheets of size 90 cm x 60cm (or) suitable size 10 BG stiffened with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 10 cm. X 6.5cm. spaced at 90cm. centres with necessary props etc. complete as per standard specification. (The payment for centering shall be given after the concrete is laid.) The retrieved materials should be taken back by the contractor.
Cement Concrete 1:2:4 (One Cement, Two crushed stone sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers
For foundation and Basement
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
Supplying and laying RCC hume pipes of 300mm dia including supplying and fixing transportation ,loading and unloading charges etc, complete.
Manufacturing, supplying and fixing of Steel doors with the following specification M.S angles of a size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S. flat is provided at required intervals in the shutter frames 18 gauge C.R. sheet is laid as panel in the shutter and welded intact for 1/3 bottom portion of the shutter. M.S. flat 18x5mm is welded over the 32x6mm M.S. flat sand witching the CR sheet in between. Additional stiffener with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 20kg/sq.m with 3mm pin headed glass used for glazing and fixed with 15x12 mm teakwood beeding and 6 Nos hinges for double leaves shutter to be provided 6nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the outer frame of the door. Tower bolts 2nos. one at top and the other at the bottom arte provided one aldrop is provided at on appropriate place in the door. A Tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation or fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all meterials, labour charges, taxes, transportation to site of work, loading, unloading and all other incidental charges etc., complete.
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
Supplying and fixing in position Stainelss Steel Airport type perforated 3 seated waiting chairs with the following specification.The overall size shall be 180cm width,80cm height and 64cm depth.The chair shall be made out of perforated stainless steel plate of 1.5mm thick.The base beam shall be of 1.7mm thick with durable screw tube. The cost of chair includes cost of all materials, labours, conveyance, assembling, fixing in position and all other incidental charges excluding cost of GST.
Add GST
DELTA ENGINEERING SERVICE
A.Sivakumar
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .