Electrical Works

Amount

Renewal by Supply and Erection, Testing, Commissioning and Handing over of 1 No. 8 persons capacity passenger Lifts (544 Kgs) as per following Technical specifications. 1.Number of Lifts/Type of lift: one / Passenger, Gearless with Machine Room. 2.Load/Speed: 8 Persons 544 Kgs.) / 1.5 Mtr. Per Second 3.Grouping: Simplex 4.Travel Height/ PIT / HEADROOM: 16.5 Meter, / PIT 1525mm/ HEADROOM 4200mm 5. Number of Floors: 1 (Ground + 4 Upper Floors) 6. Floor Display Char: 0,1,2,3 and 4 7.Number of Landing Entrances: 5 (Ground + 4 Upper Floors) 8.Number and Position of Car Entrances: 1(ONE), In Front only 9.Position of Machinery: Directly above the Lift well - Gearless 10.Size of Lift well: 1885 x 1650(MM Wide * MM Depth ) 11.Lift Car Inside Size: 1100 x 1300 x 2200 x (MM Wide * MM Depth * MM Height * MMC- Value )

22. Floor Display 0,1,2,3,4: Orange Square Dot -Matrix Scrolling display - Vertical. 23. Emergency Alarm Bell: Battery operated Alarm Bell to be provided with automatic charging device. 24. Emergency Light : Battery Operated Light to be provided with automatic charging device. 25. Fireman's Switch: To be provided at Ground Floor 26. Minor Work : To be Provided by lift Contractor 27. Scaffolding : To be Provided by lift Contractor. 28. Facia plates: To be provided by lift contractor . 29. Steel for Lift machinery : To be Provided by lift contractor. 30. Servicing and Maintenance : Free Comprehensive servicing and maintenance should be provided by lift contractor during the guarntee period of One Year. 31. Provision of 1 + 2 EPABX intercom with phone to be provided at the following places vide: 1. Lift Machine Room 2. Ground floor Area and 3. Inside the Lift car by Lift Contractor.

32. Lift License : Preparation of drawing , Payment of charges to CEIG and insurance policy if any and obtaining CEIG safety certificate and lift license as per Lift act should be done by the lift contractor. 33.Automatic rescue device : To facilitate the landing of the nearest floor at the time of power failure . 34. This shall consist of suitable type battery system with charger inverter under voltage protection system etc., Special Inclusions: 1. V3f Door Operator 2 Full Height Car Operating Panel 4. Floor Annunciator 6.. False Ceiling In Car 7. Door Full height sensor for Safety 8. Overload Warning Indicator 9. Pit Ladder 10. Ss Handrail 11. Sill Support 12.Landing Push Box On Wall

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil)

Renewal by Supply and fixing of Havells make PLUTO SURFACE 1X1 PLS 15W LED 857S fitting on ceiling with necessary connections.( Philips / Havells / Equivalent make).

Renewal by Supply & Fixing of Havells make surface mounted bulk head fitting RUGBY GENX 10W LED 865SSYMBOPC for lift shaft. (Lift)

Renewal by Supply and fixing of 2 nos.6/16A two module socket , 2 nos. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections.

Renewal by Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB, 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.

Renewal by Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only.

Renewal by Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.

Renewal by Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.

Renewal by Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection by 10 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.(From TPN to Vertical DB).

Renewal by Supply and clamping of 3-1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamp.

Renewal by Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Renewal by Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with earth Connection.

Renewal by Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B' GIpipe of dia not less than 40mm with copper earth plate of size 125mmx50mmx 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Renewal by Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Dismantling Charges

U.S. ELECTRICALS (BID ID -1269948)