REPAIR MAINT OF COOLING APPLIANCES, DG SET, STREET LIGHT AND EARTHING AT GRD NCC UNDER GE(AF) GORAKHPUR

Amount

Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for point wiring controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with sunmica/Bakelite sheet 3mm thick and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed for following :- (a) One Light/fan point controlled by one switch

(b) One 5 Amps socket point controlled by one 5 Amps switch on same board.

(c) One 5 Amps socket point controlled by one 5 Amps switch on independent board.

(d) One bell point controlled by one 5 Amps bell push.

(e) One light point controlled by two 5 Amps two way switch.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with sunmica/Bakelite sheet 3mm thick including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 2 to 5 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

M&L for point wiring controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including PVC casing caping all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes with sunmica/Bakelite sheet 3mm thick and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed. (a) One Light/fan point controlled by one switch

(b) One 5 Amps socket point controlled by one 5 Amps switch on same board.

(c) One 5 Amps socket point controlled by one 5 Amps switch on independent board.

(d) One bell point controlled by one 5 Amps bell push.

(e) One light point controlled by two 5 Amps two way switch.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including PVC casing caping with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with sunmica/Bakelite sheet 3mm thick including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 8 to 12 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

S&F switch piano, flush type 5/6 amp, single pole, two way 240 volt complete all as specified and directed.

S&F socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

S&F socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

S&F switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

S&F bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F fan regulator electronic step up type, 80/100W SP 230 volt complete all as specified and as directed.

S&F lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Taking down old unserviceable light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed.

S&F 22 watt LED light fitting engineering extruded aluminium batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Philips BN021LED22S or equivalent in Havells, Crompton

S&F recess mounting LED luminaire of size 2'x2' white 30 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make:- Philips RC360BLED30S or equivalent in Havells, Crompton

S&F recess mounting LED luminaire round shape 12 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make:- Philips DN296BLED12S or equivalent in Havells, Crompton

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make:-Philips or equivalent in Havells, Crompton

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 35 W LED Street light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps, nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:-Philips or equivalent in Havells, Crompton

S&F, testing energy saving, die cast aluminium housing IP 65 protection, 35 W LED flood light fitting with high power LED as light source complete fixed on wall using nuts, bolts & washers all as per site requirement complete all as specified and directed. Make:-PhilipsBVP120LED35CWFG or equivalent in Havells, Crompton

Taking down carefully old and unserviceable sub main wiring of 2/3 runs or main-wiring of any size of aluminium conductor cable from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc including making good disturbed surface of wall ceiling etc complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 2.50 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 1.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 2.5 sqmm conductor cable, 1 No 1.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length). Make : Havells, KEI, Grandlay

M&L for sub main wiring with 2 Nos single core PVC insulated -unsheathed 6.0 Sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4.0 Sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6.0 Sqmm conductor cable, 1 No. 4.0 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length) Make : Havells, KEI, Grandlay

Taking down old unserviceable MCCB DBs / MCB DB / Main Switches including MCBs/ MCCBs/ Isolaters, complete all as specified and as directed. Note: Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.

S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F MCCB, 4 pole, 63 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCCB, 4 pole, 100 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCCB, 4 pole, 125 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCB, SP, 6 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SP, 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TP, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F in replacement U/S and broken exhaust fan (air freshener) single phase 230/240 volt AC 300mm sweep with louvers, plastic body with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed. Make: Havells/Bajaj/CG.

S&F in replacement unsv wall mounted fan single phase 230/240 volt AC 400mm sweep, with regulator, oscillation type complete fixed properly on wall and connecting /testing as directed. Note Old unsv fan will be deposited to E/M store yard Make: Havells/Bajaj/CG.

Repairing of light point (normal/ flameproof), fan point, socket point 5A/15A, switches sockets, fan regulator, light fixtures any type, lamp any type, MCB DB's & all electrical accessories in day to day/door to door maintenance and making it serviceable in all respect with replacement of any major part but including small length of wires (not more than 50cm) adhesive cable and other connected minor accessories by providing sufficient and skilled manpower. Work shall also include to check & removal of current leakages in Bldgs and any urgent nature of work as and when directed. The scope also include cutting of existing Bakelite sheet to accommodate new elect fittings/fixtures like switches, sockets, fan regulators etc. Note :- (a) The rate quoted by the contractor for Each Job is deemed to be included consisting of minimum 03 complaints. (b) The contractor or his representative will take complaint from MES complaint Register through MES job card. (c) The contractor will made separate items register with location and signature of user. (d) The contractor will maintain complete details of Job cards (Working/Off working hours) and items involved with date and user signature. (e) The ladder and T&P as required will be provided by the contractor. (f) Risk factor & security pass will be the contractor's end. (g) If the complain will not attend within 24 hours a penalty of Rs. 500/- for per complain will be imposed on Contractor. (h) All supply material shall be deposited by contractor in MES store yard and issued in every Job Card as per requirement. (j) The tradesmen should be available at MES area complaint cell (In MES Complex), after completing their daily Job Cards as well as during off working hours / Night / Sunday / Holiday.

Supply only in replacement fan regulator electronic step up type, 80W, SP 230 volt complete all as specified and as directed.

Supply only in replacement switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.

Supply only in replacement modular switch single pole 1 way, 1 module, 16 Amp complete all as specified and directed.

Supply only in replacement modular socket out let multipurpose 6A -2/3 pin, SP 1 way 2 module complete all as specified and directed.

Supply only in replacement modular socket out let multipurpose 6A/16A-2/3 pin, SP 1 way 2 module complete all as specified and directed.

Supply only in replacement modular bell push pole 1 way, 1 module, 6 Amp complete all as specified and directed.

Supply only switch socket combination multipurpose 5 pin 5/15 Amps

Supply only switch socket combination multipurpose 5 pin 5 Amps

Supply only in replacement switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

Supply only in replacement socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

Supply only in replacement bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

Supply only in replacement Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Supply only in replacement lamp LED 12 watt, 240 volts complete all as specified and directed.

Supply only tape insulation, 1100 volts grade 20mm width, 15 mtrs long complete all as specified and directed.

S&F in replacement ball bearing No. 6200 to 6203 complete all as specified and directed. Make:-SKF/NRB/NBC/TATA

S&F in replacement gun metal bush of any description and size to suit existing motor shaft complete all as specified and directed.

S&F in replacement capacitor of capacity 2.5 mfd PVC body complete all as specified and directed. Make:- EPCOS/JYOTI/ USHA

S&F in replacement capacitor of capacity 3.15 mfd PVC body complete all as specified and directed. Make:- EPCOS/ JYOTI/ USHA

Supply only wire flexible 23/0.0076, twin core twisted, PVC insulated copper stranded conductor complete all as specified and directed.

S&F in replacment old and UNSV ceiling fan 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 % ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and as directed. Note : UNSV fans will be deposited to MES Store by Contractor.

S&F in replacment old and UNSV ceiling fan 1250 mm sweep with underlight LED light BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 % ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and as directed. Note : UNSV fans will be deposited to MES Store by Contractor.

Disconnecting, taking down & removing carefully the existing ceiling fan, exhaust fans, wall bracket fans, air circulating fans and pedestal fans etc. of any description, any sweep and from any position/locations for repairs/servicing/numbering, dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing, fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessary adjustment and proper alignment of blades, hanging/fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction of the department complete all as specified and directed. Note:- (i) The replacement of defective/ nonfunctional parts shall be measured & paid separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item. (ii) Burnt out windings replaced, shall be measured and paid for separately under appropriate item here-in-after. (iii) The rates for above items are deemed to include transportation charges from E/M store yard to workshop and vice versa.

Taking out & removing old burnt-out winding and rewinding of motor of ceiling fans 1200/1400 mm sweep of any description and rewinding of fan motor with appropriate size super enameled copper wire approx 200 gram including insulating material such as illumines paper, letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of the department for the following Fans:- Make of winding wire: Atlas/Finolex/ Devi Dayal

All as per item No. 74 above but rewinding of motor of exhaust fans of 225/250 mm sweep with 170 gram winding wire.

All as per item No. 74 above but rewinding of motor of exhaust fans of 300/400 mm sweep with 200 gram winding wire.

S&F in replacement of down rod with anti sucide safe fan down rod of 260mm length suitable for fixing in existing eceiling fan complete with nuts bolts, check nut and washer including making holes by driling for bolts, complete all as specified and directed. Make: Gold Life.Note:- (i) Anti sucide safe down rod will be active if load on fan exceeding 20.00 Kg. then down rod pipe opens from middle and spring in pipe will expended for landing smoothly of person trying to commit suicide.

S&F PVC Casing caping of size 25mmx16mm complete all as specified and directed

S&F modular type PVC enclosure with a two pin and earth plug and socket 16 Amps complete with one single pole MCB 20/25 Amps capacity complete all as specified and directed.

S&F SS Screws of dia 6mm with long plug shaft for fixing of casing caping complete all as specified and directed

S&F fastener bolts for fixing of geysers complete all as specified and directed

S&F in replacment single core 1.5sqmm copper cable Heat Resistant Flame Retardant (HRFR) PVC Insulated Industrial flexible cable 1100 volts complete all as specifeid and directed.

S&F in replacment single core 2.5sqmm copper cable Heat Resistant Flame Retardant (HRFR) PVC Insulated Industrial flexible cable 1100 volts complete all as specifeid and directed.

S&F in replacment single core 4sqmm copper cable Heat Resistant Flame Retardant (HRFR) PVC Insulated Industrial flexible cable 1100 volts complete all as specifeid and directed.

S&F in replacement 3 core PVC insulated and FR PVC Round Sheathed, Copper Conductor 2.50sqmm each core, 1100 volts grade complete all as specified and directed.

S&F in replacment motor, single phase for 200/250mm Exhaust fan as per sample complete all as specified and directed.

S&F in replacement Switch Socket combination unit with box having 20A Switch, 6A/16A Socket, 240 volts complete all as specified and directed.

Taking down geysers carefully of any type and make of capacity 25 ltrs after disconnecting water supply and electrical connection, opening of geysers for inspection of unserviceable parts followed by servicing overhauling after replacement of unserviceable component with cleaning of heating element and inner tank by de-scaling including assembling fixing in position, making all electrical & water supply connection, making functional and testing complete all specified and directed. Note:- Components/spare part required for replacement shall be paid for separately under respective item here in after as supply only/issue only on demand.

All as per item No above but of capacity 50 ltrs.

Supply only heating element ISI marked 1.5 KW suitable for geyser of 25 litres, horizontal or vertical type of any make complete all as specified and directed.

Supply only heating element ISI marked 2.0 KW suitable for geyser of 25 litres, horizontal or vertical type of any make complete all as specified and directed.

Supply only heating element pin type (Triangular) 1.5 KW rating capacity 230 V, ISI marked complete all as specified and directed.

Supply only heating element pin type 2.0 KW rating capacity 230 V, ISI marked complete all as specified and directed.

Supply only thermostat minimum 300mm long ISI marked suitable for geyser of 25/50 litres, horizontal or vertical type of any make complete all as specified and directed.

Supply only power indicating lamp circular/rectangle type suitable for 25/50 ltrs capacity geyser complete all as specified and directed.

Supply and filling up glass wool suitable for geyser of 25/50 litres, horizontal or vertical type of any make complete all as specified and directed.

M&L for repairing leakage of inner copper tank of geyser (any make) 25/50 litres capacity by brazing including all necessary denting etc complete all as specified and directed.

Supply and fixing in replacement of inner copper cell geyser (any make) 25 litres capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Supply and fixing in replacement of inner copper cell geyser (any make) 50 litres capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Renewal of base assembly complete suitable for geyser (any make) 25 litres capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Renewal of base assembly complete suitable for geyser (any make) 50 litres capacity and making connections by brazing including all necessary accessories complete all as specified and directed.

Supply only top or bottom cover for any make of geyser of 25 Ltrs capacity complete all as specified and directed.

Supply only top or bottom cover for any make of geyser of 50 Ltrs capacity complete all as specified and directed.

S&F in replacement hot water supply CP/PVC connection pipe of size 450mm long heavy duty with check nut for 15 mm dia pipe ISI marked complete all as specified and directed.

S&F in replacement plug top of polycarbonate 3 pin, 15/16 Amp, 230 V complete all as specified and directed.

S&F in replacement plug top metallic 3 pin, 20 Amp, 230 V complete all as specified and directed.

S&F in replacement gun metal non return valve heavy duty 15mm dia complete all as specified and directed.

S&F in replacement of fusible plug chromium plated brass (ISI marked) suitable for any type of geyser complete all as specified and directed.

S&F in replacement outer shell for 25ltr capacity geyser vertical or horizontal type including top and bottom covers plate complete all as specified and as directed.

S&F in replacement outer shell for 50ltr capacity geyser vertical or horizontal type including top and bottom covers plate complete all as specified and as directed.

Supply only gasket with stud for aperture assembly of any type geyser complete all as specified and directed.

Supply only safety pressure/air lock valve suitable for geyser 25/50 Ltrs capacity complete all as specified and directed.

Checking of leakage in refrigerant system of water cooler of 150 litres capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging refrigerant gas R. 22 in required quantity all as directed by Engineer-in-Charge.

S & F (in repairs) gas filter, flare type ¾" x ½" flare all as directed by Engineer-in-Charge

S & F(in repairs) copper capliery for water cooler of any size, as directed by Engineer-in-Charge

Dismantling of existing repairable water cooler of any make and capacity from its position including disconnecting of electric connections, transporting from site to contractor's workshop including loading/unloading for repairs and replacement of defective body and spares reassembling and transporting back to site including ,installation of water cooler on existing foundation and making electric & water supply connection etc (notes:- Replacement of defective item shall be measured & paid for separately).

M&L replacement of pipe connector for water cooler including flange, screw, nozzle of nipple female nozzle and extention all chromium plated.

Supply & fixing (in repairs) push cock chromium plated (inner or outer threaded) of 15 mm bore size complete as in water cooler, ,complete all as spcified and directed.by the Engineer-in-Charge

Taking out of unservicable compressors of Water Cooler 40 Ltrs including desconnecting suction / discharge copper tubing and replacing by new compressor of model CR-22 with nuts, bolts rubber grommet and washer, connecting copper tubing by welding, flare nuts etc complete all as specified and directed by EIC.

Servicing of Split /Window type AC of Capacity 1.5 ton any make/ model incl removing the AC and cleaning ,Oiling, servicing and checking for proper functioning and re-fixing at site comp all as directed Note:- Spare parts will be measured and paid separetly

Checking of unserviceable Window/split AC/Water Cooler/Desert Cooler U/S parts likewise relay,compressor,blade,motor, gas leakage,condensor coil,capacitor,Thermostate,Filter,PCB,Wiring etc all mechanical accessories in day to day and making it serviceable in all respect with all replacement of any major part but including minor repairs adhesive cable and other connected accessories by providing sufficient and skilled manpower, work shall also include to check & removal of leakage in window/splitAC /water cooler/ Deep freezer as and when directed. The scope also include complete checking of window/split/summer Appliances. Note:-(a) The rate quoted by the contractor for Each job is deemed to be included all minor repairs (b) The contractor or his representative will take complaint from MES complaint Register through MES job card (c)The contractor will made seprate items register with location and signature of user (d) The contractor will maintain complete detail of JOB card and items involved with date and user signature (e) The ladder and T&P as required will be provided by the contractor (f) Risk Factor will be the contractor 's end

Replacement of condensing coil for 40/80 Ltr. Capacity water cooler of any make , complete all as specified and diected .

S&F float valve 15mm dia suitable for water cooler.

S&F relay for compressor for water cooler

S&F starting capacitor ,50Mfd

S&F running capacitor, 36mfd.

S&F in replacement starting relay for 1.5 TR / 2 TR compressor all as specified and directed by EIC.

S&F in replacement of overload protector for 1.5 TR / 2 TR compressor ,complete all as spcified and directed by EIC.

S&F in replacement Thermostate switch for 1.5 TR / 2 TR AC compressor all as specified and directed (Make:- Carrier / Voltas / LG)

S&F in replacement swing motor for 1.5 TR split AC ,complete all as spcified and directed by EIC (Make:- LG / Carrier /Blue Star/ Voltas)

S&F in replacement reverse cycle solenoid valve in split type AC 1.5 TR / 2 TR capacity with necessary extension to suction / discharge copper tubing & toggle switch complete all as specified and directed by EIC.

S&F in replacement suction copper pipe line heavy duty 1/2" dia with foam insulation and flair nuts from indoor to outdoor unit of split AC 1.5 TR / 2 TR capacity ,complete all as spcified and directed.

All as per item No 143 above but discharge copper pipe, heavy duty 1/4" dia.

S&F PVC insulated three core stranded copper cable of size 3 core 6 sqmm ,complete all as spcified and directed. (Make:- Paragon / Havells / Seicko /Finolex)

S&F copper gas filter for AC 1.5 TR / 2 TR capacity ,complete all as spcified and directed.

S&F PVC pipe nylon imbraded 15 mm dia for condensed water drain fitted with clamps / concealed in wall ,complete all as spcified and directed.

Taking out of unservicable compressors of 1.5 TR capacity including disconnecting suction / discharge copper tubing and replacing by new compressor of model CR-22 with nuts, bolts rubber grommet and washer, connecting copper tubing by welding, flare nuts etc, complete all as specified and directed by EIC.

M & L for rewinding of blower motor for 1.5 ton AC with superior quality of super enameled copper conductor of appropriate sizes in existing weight and gauge incl replacement of Bush/Bearing, commissioning and testing complete all as specified and directed.

M & L for gas charging in Split type A/C unit 1.5/2 ton capacity using refrigerant as per standard practice after flushing, vacuuming incl detecting leakage, rectification of leakage, commissioning and testing complete all as specified and directed

Supply and fixing in replacement of new auto swing motor for window/split type AC 1.5 TON/2 TON all as spcified.

Supply and fixing Fan Blower set for 1.5 Ton Split type AC (as per sample) complete all as spcified and directed

S & Fin replacement of new vertical water lifting pump, single phase, 1/7 HP or any HP suitable for desert coolers complete in all respect. (Make : summerking/Summer cool /MEI/Crompton

S & F in replacement of new fan motor 1/7 HP or any HP 230V, 50 Hz cycles A/C supply complete in all respects complete all as specified and directed. (Make : summerking/Summer cool /MEI/Cromptonsummerking)

Supply and fixing wood wool pad for deser cooler of suitable size with connected acces. (one set of 3nos)

Installatoin /Re-installation only split tye Air conditioning electrically driven ,230/250V ,AC 50 Hz capacity 1.5/2.0 Ton with high wall mounted type fan coil unit (FCU) to be fitted in wall with rowl plugs including making holes for inlet /outlet in the wall and making good existing surface including insulation of tubing with expanded polythene foam insulation tubing and making necessary connection including M&L for unplastiised PVC pipe medium duly 20 mm dia for draining out condensed water all as required and directed including necessary connection through voltage stabilizer all as spcified

M & L for rewinding of main transformer of voltage stablizer using supirior quality of super enameled copper of core matching size complete with varnising dying and re-fitment in stablizer complete all as specified and directed. (a) 5 KVA

S & F in replacement of new PCB matching size of voltage stablizer 5/4KVA of single phase operation in AC supply complete all as specified and directed

S & F in replacement of battery TDR for voltage stablizer 4/5 KVA complete all as specified and directed.

S & F in replacement of voltmeter 0-300 volt for voltage stablizer 4/5 KVA complete all as specified and directed.

Carrying out pressure leak test of split Acs 1.5/2.0 TR by Nitrogen gas pressure for detecting leak in cooling unit refrigerant pipe and repairing the leak by welding or brazing of cooling unit and refrigerant pipe, putting under pressure for leak checking after repairs of leak pipe including gas charging transporting & carrying out T&P required at site all as specified and directed.

Dismantling of defective worn out wiring of indoor unit of split AC of capacity 1.5 TR /2TR 3 TR including unserviceable corded electronic remote control, supply and fixing PCB (Printed circuit Board) & Visual Eye demo plate and cordless remote hand set to suit /match the existing system all as specified and directed by EIC.

Compressor rotary suitable for reversible cycle split type AC 1.5 TR (Original sealed unit is to supply ) of Make Blue Star, Videocon, Samsung, or its equivalent of other specified make as approved.

`Supply and fixing condensing coil for 185 litres capacity refrigerator by disconnecting condensing coil from refrigerator, N2 pressure testing and flushing out the system and charging of R-12 gas as per required quantity and testing complete all as directed.

Supply and fixing condensing coil for 165 litres capacity refrigerator by disconnecting condensing coil from refrigerator, N2 pressure testing and flushing out the system and charging of R-12 gas as per required quantity and testing complete all as directed.

Checking of leakage in refrigerant system of water cooler of 150 litres capacity by putting nitrogen pressure, identifying the leak, rectifying the leak/defects by brazing and testing, vacuuming the system including charging refrigerant gas R. 22 in required quantity all as directed by Engineer-in-Charge.

S&F starting relay, open type for refrigerator of capacity 165 litres all as directed by Engineer-in-Charge (Make : Ranutrol/ Sriram/ Whirlpool)

S & F over load protector for 1/6 HP refrigerator of capacity 165/300 litres all as directed by Engineer-in-Charge.

S & F thermostat defrost type for refrigerator all as directed by Engineer-in-Charge. (Make - Ranutrol/ Indfoss)

S & F door gasket for 165 litres capacity refrigerator, any make all as directed by Engineer-in-Charge.

S & F butter shutter for any make refrigerator of 165 litres capacity.

S & F Defrost tray (Plastic) as per sample for 165 litres capacity refrigerator.

Repair/Maintenance, servicing of DG Sets 62.5 KVA ,( Make-cummins.)by checking of faults and replacement of U/S or worn out parts including drainage of used engine oil , cleaning of oil sump, head,filling of new lub oil, replacement of filter elemement,tunning of engine by adjustment of tappet clearance, cleaning of air filter,radiator, preplaying of warn out fan belt, carbon brush or any other parts and making the engine smooth running.by new parts of smooth running of DG set of following capacity:- (Note – Spare parts will be measured & paid separately at supply only rates).

Supply of following worn out spare parts of DG Set 62.5 KVA and testing complete.,make-cummins (i) Oil Filter. (Make – Mico).

(ii) Diesel filter. (Make – Mico).

(iii) ’V’ belt for dynamo. (Make – Finner).

(iv) Air Cleaner element

(v) Ignition Switch. (Make – TCO – ZUSE).

(vi) ‘V’ belt for alternator. (Make – Mico).

(vii) Carbon brush for alternator. (Make – LUCKS TVS).

Repair/Maintenance, servicing of DG Sets 25/40 KVA ,( Make-Kirloskar.)by checking of faults and replacement of U/S or worn out parts including drainage of used engine oil , cleaning of oil sump, head,filling of new lub oil, replacement of filter elemement,tunning of engine by adjustment of tappet clearance, cleaning of air filter,radiator, preplaying of warn out fan belt, carbon brush or any other parts and making the engine smooth running.by new parts of smooth running of DG set of following capacity:- (Note – Spare parts will be measured & paid separately at supply only rates).

Supply of following worn out spare parts of DG Set 25/40 KVA and testing complete ,make-KIRLOSKAR (i) Oil Filter. (Make – Mico).

(ii) Diesel filter. (Make – Mico).

(iii) ’V’ belt for dynamo. (Make – Finner).

(iv) Air Cleaner.

(v) Ignition Switch. (Make – TCO – ZUSE).

(vi) ‘V’ belt for alternator. (Make – Mico).

(vii) Carbon brush for alternator. (Make – LUCKS TVS).

Repair/Maintenance, servicing of DG Sets 7.5 KVA ,( Make-Kirloskar.)by checking of faults and replacement of U/S or worn out parts including drainage of used engine oil , cleaning of oil sump, head,filling of new lub oil, replacement of filter elemement,tunning of engine by adjustment of tappet clearance, cleaning of air filter,radiator, preplaying of warn out fan belt, carbon brush or any other parts and making the engine smooth running.by new parts of smooth running of DG set of following capacity:- (Note – Spare parts will be measured & paid separately at supply only rates).

Supply and replace following worn out spare parts of DG Set 7.5 KVA and testing complete ,make-KIRLOSKAR (i) Oil Filter. (Make – Mico).

(ii) Diesel filter. (Make – Mico).

(iii) Air Cleaner.

(iv) Ignition Switch. (Make – TCO – ZUSE).

(v) Carbon brush for alternator. (Make – LUCKS TVS).

Repair/Maintenance, servicing of DG Sets 15 KVA ,( Make-Kirloskar.)by checking of faults and replacement of U/S or worn out parts including drainage of used engine oil , cleaning of oil sump, head,filling of new lub oil, replacement of filter elemement,tunning of engine by adjustment of tappet clearance, cleaning of air filter,radiator, preplaying of warn out fan belt, carbon brush or any other parts and making the engine smooth running.by new parts of smooth running of DG set of following capacity:- (Note – Spare parts will be measured & paid separately at supply only rates).

Supply of following worn out spare parts of DG Set 15 KVA and testing complete ,make-KIRLOSKAR (i) Oil Filter. (Make – Mico).

(ii) Diesel filter. (Make – Mico).

(iii) ’V’ belt for dynamo. (Make – Finner).

(iv) Air Cleaner.

(v) Ignition Switch. (Make – TCO – ZUSE).

(vi) ‘V’ belt for alternator. (Make – Mico).

(vii) Carbon brush for alternator. (Make – LUCKS TVS).

Supply only Engine Oil CRB + of grade 20W40 for diesel Engine Make- Castrol/kirlosker/volvoline/Indane/HP

Supply only coolent superior quality grade for DG Set Make-Kirlosker make/castrol/indane.

Taking down radiator from the DG Sets and cleaning with castic soda, detergent, fibre brush & repairing, brazing of leakage of assembly complete and re-fixing the same at existing place with all accessories complete all as specified and directed.

Taking down 40 KVA alternator from the Engine, opening as well as cutting worn out winding, re-winding with superior quality copper enamel wire, re-fixing the existing place and complete testing all as specification and directed

Taking down 62.5 KVA alternator from the Engine, opening as well as cutting worn out winding, re-winding with superior quality copper enamel wire, re-fixing the existing place and complete testing all as specification and directed

Supply and Fix indicator lamp led type (RYB), (Set of Three) complete all as specified single phase indication purpose.

Supply and Fix Voltmeter 0-500 Volts as per existing panel / DG Set.

Supply and Fix ammeter 0-100 Amps complete all as per existing panel / DG Set.

S&F oil pressure guage.

S&F Battery charging ammeter

Repair of charging 12 V alternator inluding replacement diode/rectifier etc

Repair of self starter 12 V inluding replacement bending solinoid Switch connecting.

S&F Automatic rechargeble dry battery 24 Volts 36AH for DG set .

S&F Automatic rechargeble dry battery 12 Volts 36AH for DG set .

S&F lead acid Battery 12 Volts 70AH

S&F lead acid Battery 12 Volts 150AH

S&F asbestas rope 20mm dia the exhaust pipe with GI wire wraped on exhaust cylinder pipe all as directed by Engr -In -Charge

S&F single core cu insulated two wire 35sqmm for Battery lead (Red and Black Colour) dully clamped both end comleted.

S& F Cu Thimble/Lugs for battery lead

Cleaning of Diesel tank with castic soda ,water,and filled with diesel.

M&L for spray painting of canopy of DG set 40 KVA/ 62.5 kva with Two coat of spray synthetic enamel paints after rubbing,scrapping of old paints with emery paper, cleaning and preparation of smooth surface. Completeall as per specified and directed by Engg in charge.

Disconnecting and taking out existing street light fitting of any description and in any position on poles and Supplying & Fixing LED STREET LIGHT 45 watt LED With Lens drawn Alluminimum housing in grey finish with clear acrylic including LED lamp and cast Alluminimum pipe mounting attachment completed as per specified and directed . Havells cat Part No ENDURAPEARLNEOSL45LED757PASYTOPC or equivalent of Bajaj /Philips

Disconnecting and taking out existing street light fitting of any description and in any position on poles and Supplying & Fixing LED STREET LIGHT 60 watt LED With Lens drawn Alluminimum housing in grey finish with clear acrylic including LED lamp and cast Alluminimum pipe mounting attachment completed as per specified and directed . Havells cat Part No ENDURAPEARLNEOSL60LED757PASYTOPC or equivalent of Bajaj /Philips

Supply and fix in repair Intergral LED Flood Light Luminaire 60 W clamp type Comprises a pressure dicast aluminium housing with LEDs and driver. Heat resistant toughened glass with frame suitably gasketed for IP 65 Class I protection including all accessories, all as specified and directed Make: Havells cat part no-JETAQUANTOPLUSFLP60WLED757SYMLENS or equivalent crompton/philips

Labour only for checking the serviceability of the different spares / components / parts of street / security light fittings on pole/wall any wattage/capacity) of any description and in any position, replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in position, connecting to electric supply and its testing on installation complete all as specified and directed by Engineer-in-Charge.

Supply only the following parts for LED Street Light/Flood Light fitting :- (a) Supply only LED power Driver for street light 60 watt Make:Havells or equivalent

(b) Supply only LED power Driver for flood light 50 watt Make:Havells or equivalent

(a) Supply only LED power Driver for street light 30/35/45 watt Make:Havells or equivalent

S&F in replacment Street light panel floor/pole mounted dust and vermin proof factory made (CPRI approved) fabricated out of 2mm thick CRCA sheet suitable for 3 phase, 415 volts, 50 Hz AC supply bus bar chamber with copper bus bar of suitable amp rating doe 3 phase and 4 wire system duly insulated with head shrikable sleeves as per colour supported on epoxy insulator 1 set, common earth bus with two earth terminals outside panel board cable alley cable gland with independent plate at bottom and complete panel of capacity 12KW contactor rating 65 Amps TP MCCB rating, 63 Amp TPN with astronomical timer switch including foundation complete all as specified and directed.

S&F in replacement 3 core PVC insulated and FR PVC Round Sheathed, Copper Conductor 2.50sqmm each core, 1100 volts grade complete all as specified and directed.

Replacement of existing unserviceable light fitting’s bracket incl FI clamps of any description and in any position and supplying and fixing brackets made out of 32 mm dia light grade GI pipe 1.50 mtr long bent to shape and size fixed on location using new clamps made to shape incl nuts,bolts & washers complete all as specified and directed by Engineer-in-Charge.

Disconnecting and taking out existing MS boxes of any description and in any position on poles or fixed in the plinth of poles and supplying and fixing in position new SMC (Sheet moulding compound)Junction boxes of size 280mm X 170mm X 130 mm depth. The box shall provided with and including 4 Nos, 100 Amps aluminum bus bar mounted on porcelain insulators including one no. MCB SP 230 volts 6 amps of make- Sintex , Siemens/L&T /Havells/Standard and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5mm FI clamps,nuts,bolts & washers complete all as specified and directed by Engineer-in-Charge..

Preparation of old painted surfaces of LT Steel tubular poles complete and applying synthetic enamel paint of 200 mm width with alternate block of white /Black strips upto 5 feet height from ground level including writing the pole No with black enameled paint of size 70 mm wide and 100 mm height, and applying two coats of alluminimum paint over a coat of red oxide on the balance portion of pole including following items complete all as specified and directed by Engineer-in-Charge. (a) Cross arms (b) 45/50 mm dia bracket (each pole 1 Nos) (c) Junction Box. Note :- for items (a), (b) aluminimum paint only & (c) applied grey colour.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.5 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work complete all as specified and directed by Engr- in- Chanrge

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron strip 32x6 mm by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.5 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work complete all as specified and directed by Engr- in- Chanrge

S&F in replacement earth continuity conductor or main earthing lead 32mmx6mm GI strip/earth lead, laid in trench, fixed on walls or any other position including jointing by tinned GI nuts, bolts and washers in addition to brazing at every joint, complete all as specified and directed.

S&F in replacement aluminium strip of size 25x3.15 mm complete with saddle, porcelain insulator and fixing screws, washer/accessories for roof and down conductor complete all as specified and directed.

S&F in replacement earth continuity conductor or main earthing lead 25mmx4mm GI strip/earth lead, laid in trench, fixed on walls or any other position including jointing by tinned GI nuts, bolts and washers in addition to brazing at every joint, complete all as specified and directed.

M&L for GI pipe (light grade) 40mm bore with all fittings laid in trenches/wall complete for protection cable/earthing strips complete all as specified and directed.

M&L in replacement for construction of earth pit chamber of internal dimensions of 300x300x250mm in brick masonry built in PCC 1:3:6 type C-1 using 20mm graded stone aggregate for earth pit with pre cast RCC cover slab (1:2:4) type B-1 using 20mm graded stone aggregate 40mm thick reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia MS round bar handle, GI light grade watering pipe 20 mm dia- 2.0mtr long with funnel and wire mesh including taking out and dismantle of unserviceable earth pits complete all as specified and directed.

S&F in replacement pre cast RCC cover slab (1:2:4) type B-1 using 20mm graded stone aggregate 40mm thick reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia MS round bar handle for earth pit chamber of internal dimensions of 300x300x250mm complete all as specified and directed

Supply and spreading in layers Magnesium Sulphate (MgSO4 crystal) for repair to existing earthing pit complete all as specified and directed.

M&L for brazing of earthing strips (GI/Copper/Aluminium) by arc/gas welding approx 50mm long tapper joint complete all as specified and directed.

M&L for replacement of bolts stainless steel of size 1/4"x1" with nuts & washer (01 each) complete all as specified and directed.

S&F in replacement Air termination, single pointed Aluminium rod 12mm dia and 300mm long fixed/ tightened properly at directed location/ height complete all as specified and directed.

M/L test point terminal block made of gun metal or phorphous bronze of size 75x75x25mm drilled and screwed incl 3 Nos x 8mm dia 25 mm long hexagonal head screws complete all as specified and directed

M&L for making MS Board as per existing shape/size not exceeding 200mmx300mm width and writing following details in Capital letters form of 25mm height and 10mm width on single side of the sticker in black colour with red or yellow colour back ground as required at site complete and make to shape as per size of existing MS board complete all as specified and directed with following:- (a) Type of earthing-GI or Copper or Chemical (b) Earthing for which equipment is being connected (e.g. lightning arrester) (c) Number of earth pit and the total number of particular type of earthing for that Bldg/Equipment (e.g. Number-01 Lightning Arrester pit out of 04 Nos pit of same- "LA-01/04")

S&F in replacment porcelain insulators for fixing roof/down conductor including fixing of screws etc as specifed and directed.

Unitech India (BID ID -3068621)

PITAMBARI TRADERS (BID ID -3068839)

M/s A.K Construction (BID ID -3078513)

m/s allied enterprises (BID ID -3077711)

M/ s J S Kapoor And Sons (BID ID -3068529)