Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.3 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹10.8 L+₹50,436.24 (4.91%)Rejected-AOC | L2 | Rejected-AOC Other than lowest |
Tender Value
₹12.6 L
EMD Value
₹25,120
Closing Date
2 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I CG
Noida
PROVISION OF WASH ROOM FOR GENTS LADIES AND HANDICAPS AT COAST GUARD OFFICER MESS ANNEXE SECTOR 24 NOIDA
2023_MES_593496_1
AGE I CGN 23 23 24
Open Tender
Civil Works
Item Rate
240 days
Noida
E a i
7 documents required · 7 mandatory
₹500
AGE I CG
₹25,120
14 Jul 2023
6 May 2023
5 Jun 2023
6 May 2023
2 Jun 2023
19 May 2023
Amount
Suarface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft /Loose soil complete.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 depth for foundation etc or for shafts well cesspits manholes pier holed etc 10 Sqm on plan and getting out in soft /Loose soil complete.
M&L PCC 1:4:8 type D2 using 40 mm graded aggregate in Foundation filling and mass concrete/ Bed concrete
M&L for RCC M-25 (design mix) ( using 20 mm graded stone aggregate ) as in foundation, including rafts, footing, foundation beams, plinth beams, bases for columns etc basement slabs complete.
M&L for RCC M-25 Design Mix concrete (using 20mm graded aggregatet) as in columns, pillars, piers, post and struts. Complete all as specified and directed.
M&L for RCC M-25( Design Mix) concrete (using 20mm graded aggregatet) as bends, lintels over 1.50 M span etc Complete all as specified and directed.
M&L for RCC M-25( Design Mix) concrete (using 20mm graded aggregatet) as in shelves /slabs supported on walls, beam and columns,in floors ,roof, landings ,balconies, slabs in Shelves and the like complete all as spd and directed.
M&L for form work to sides of concrete foundations ,footings bases of coloumns,raft and raft beams sides and soffits of foundation and plinth beams and similar work vertical or to better.
M&L for formwork sides and soffits of floor or roof beams ,beam haunching ,girders ,,bressummers ,lintels,bends, cantilivers,shelves including supports ,overhangs,etc, also splays between floors and beams ,etc
M&L for form work to siffits of suspended slabs such as roof slabs,/shelves floor slabs etc ,landing ans similar work, not exe 200mm thick (horizontal or sloping ) for fair finish surface all as spd.
M&L for form work to sides of columns, pillars,posts etc and stanchion with rough finished surface of concrete
S&F for mild steel bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips.
All as per item No 12 above 5mm dia and over upto and including 10mm dia in stirupps, spacers and binders but in stirupps. Complete all as specified and directed.
M&L for old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified.
M&L for old size Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cm (1:4) complete
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface finished fair and even without using extra cement complete all as specified and directed
M&L rendering 10 mm thick CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete.
M & L for broken stone hard core of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and well rammed to a true surface all as specified and directed.
M & L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, floors and pavings etc. all as specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5 mm graded aggregate as in floor to receive floor finishes etc. all as specified.
M&L for Non skid ceramic coloured joint free tiles 400mm x 400mm 7to 8mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15 mm thick in cement mortar (1:4) laying floor finish complete all as specified and directed.
M&L for Glazed ceramic dak shade glossy tiles coloured of size 300mm x600mmx7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and Including 5mm thick rendering for backing of tiles in 1:3 CM on fair faces of brick work or concrete surface complete all and directed by Engr-in-charge.
M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection and similar works 75mm thick finished fair and smooth without using extra cement including necessary form work.
S & F for Steel ventilator with top hungshutter including hinges, steel peg stay, complete, all as spd and directed by the Engr-in-Charge.
S & F for figured glass, pin head type 4mm thick, ordinary quaility, not exceeding 0.5 Sqm in each pane and glazed with oil putty in square all as specified and directed.
S&F 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.
S&F 600mm long Stainless steel AISI 316 Door handles fixed to toughned glass door complete (Make Kich PHN 32 x 10mm or equivalent)
S&F double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed with door complete
S&F Iris Mirror-White 900x 800 mm fixed with brass screws and cup washers all as specified and directed by Engr in charge .(Make Parryware C846K46 or equivalent).
S&F white WC Wall Hung Verve Size: 665 x 360 x 730mm , Flush Cistern Closet including Soft Close(including Jet spray) , Hinges, Fixing Accessories Set and Accessories S Trap-300mm .(Make Parryware C0269 & C0762 or equivalent)
S&F in floor steelness steel gratings , 125mm dia
S & F urinal , size of 380 x 405 x 590mm white , with grating and union for discharge pipe including flushing system, flush pipe & wate pipe ) all as specified & directed.(Make Parryware C0575 or equivalent)
S&F wash hand basin Counter Top , white, flat back, size 550 x 450 x 200mm)) , including cutting and or all as specified and directed. (Including 15mm bore CP pillar tap, waste coupling and 32mm dia PVC waste pipe) complete all as spd (Make Parryware C0431 or equivalent).
S & f for 100mm cast iron sanitary conncetion for WC complete all as specified.
S & f for 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed by Eng-in-charge.
S&F 15mm bore fency type CP bib taps cost copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe.
S&F 15 mm bore CP stop/angle valve cost copper alloy screwed down , high pressure with crutch or butterfly handle fency type complete.
S&F for Rotational moulded polythylene 500 liters capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated alu rod & high density plastic ball complete all as specified
S & F for gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed for bore of pipe 20mm.
S& f 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wallls/floor.
S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor
S&F PVC (SWR) bends any radius
S&F 75mm PVC (SWR) vent cowl
S&F for CPVC pipe SDR-11 ,16MM bore with plain SDR-11 Fittings complete to wall and celing or laid floors or concealed & joiny only with CPVC solvent cement only (Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc) , complete all as specified and directed.
S&F for CPVC pipe SDR-11 ,20MM bore with plain SDR-11 Fittings complete to wall and celing or laid floors or concealed joiny only with CPVC solvent cement only (Elbow, Tee, Socket, Reducer, Bushing, Step over bends, End cap, End Plugs etc), complete all as specified and directed.
M & L for PCC 1:4:8 type D2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for pipes of 150 mm bore.
M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed as specified.
M & L for Precact cement concrete 1:2:4 type B1 (Using 20mm graded granite stone aggregate ) in landings, cover slabs ( for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4.
Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm
Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point . complete all as specified and directed.
S&F 15 mm size PV C connection with PTMT nuts of 600 mm long.
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 15 mm thick screed bed in cm 1:4 all as spd & directed.
S & F Papper holder with cover including all Accessories as directed by engr-in-charge. (Make Parryware T6514A1or equivalent) .
S & F Corner Glass Shelf including all Accessories as directed by engr-in-charge.(Make Parryware T6704A1 or equivalent).
S & F Towel Rack 40mm including all Accessories as directed by engr-in-charge.(Make Parryware T6709A1 or equivalent) .
S & F Health Faucets Cardiff with SS Hose & Hook (Brass) including all Accessories as directed by engr-in-charge.make parryware No T9941A1..
S & F CU (Corner unit ) Toilet block cubical made of HPL 12.0MM Thick boards of colour of textured surface as approved by Engr-in-Charge of size 1700x1200x1995mm ,door size of 600x1785mm with 150mm groun clearance incl necessary hardware (aluminium U/F channel, Aluminium top rail, stainless steel gravity hinges, alloy privacy tumb-turn with indictor ,SS coat hook cum door stopper, SS door knob , SS adjutable foot , Polyamide top rail end cap and aluminium door stopper channel etc ) complete all as specified and directed by Engr in charge (Make Greenlam model Classique Versatile ) or S & F EU (Enclosed unit) Toilet block cubic made of HPL 12.0MM thick boards of colour or textured surface as approved by Engr-in- Charge of size 2500x1200x1995mm ,door size of 600x1785mm with 150mm ground clearance incl necessary hardware ( aluminium U/F channel, aluminium top rail, stainless steel gravity hinges, alloy privacy tumb -turn with indictor, SS coat hook cum door stopper, SS door knob, SS adjutabe foot, polyaide top rail end cap and aluminium door stopper channel etc) complete all as specified and directed by Engr in charge (Make Greenlam Model Classique Versatile.
S & F Cast copper alloy chromium plate bottle trap fixed to WHB and wall complete as per Engr-in-Charge.((Make Parryware T3202A1or equivalent
S & F basin mix cast copper alloy ,chromium plated fixed to 15mm dia MS pipe complete all as specified and directed by Engr-in-Charge. ((Make Parryware T4014A1 or equivalent)
S&F 15 mm size PV C connection with PTMT nuts of 450 mm long.
Rounding to edges of stone slab one edge, such as steps, cooking platform and other similar situations and rubbing and polishing complete
M&L for water proofing treatment to RCC roof slab incl parapet as under (a) Applying bituminious primer conforming IS 3384 1965 @ 0.50 Kg/Sqm over cleaned and dry roof surface incl parapet. (b) Laying one layer of APP based polymeric membrane, 3mm thick, weight not less than 3.6 Kg/Sqm reinforced with non woven polyster fiber reinforced (wight not less than 150gm/Sqm) sealed by torch application with a minimum overlap of 100mm and 75mm at end and side of polymeric membrane (d) Alayer of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm over APP. all as specified and as directed by Engrineer-in-charge.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point
M&L for 75 mm thick PCC (1:4:8) type B2 using 40 mm graded aggregate as in floor to receive floor finishes etc. all as specified.
M & L for Machine pressed precast concrete interlocking paver block (with grey cement and no pigment) any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.
M&L for Providing, cement concrete (Type B1, 1:2:4 20mm aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
Material and labour for Point wiring for one light /fan point controlled by one,one way Switch complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 voltsgrade confirming to IS-694 drawn through and including non metallic rigid PVC heavy duty concled conduit minium 20 mm dia,but shall be increased as per actual site requirement in accordance with clause No.19.125 of SSR Part-I ,with necessary accessories with Flush mounting boxes & white plates with frames housing of switches sockets / fan regulator etc. including 1.5 Sqmm single core solid multitranded copper conductor FRLS 1100 volts grade PVC insulated and unsheathed cable as earth continuity conductor to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge for;- (Note :- The cost of Mudular mounting boxes and modular plates included in the quatated rates) Make : (i) Flush mounting boxes Cat Part Module 18 from model No 6890-07 to 6890-12 of legrand or equivalent in havells, SIEMENS. (ii) White Plates : upto 18 module from No Mylanic series model No 6755 61 to 6755 78 of Legrand or equivalent in Havells / Siemens / Crabtree
All as per item No 68 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.
S & F 6 A one-way SP switch - 1 module complete all as specified and directed Make Legard Cat No: 6755 01 or equvalent in Simens / Crabtree
S & F 16 A one-way SP switch - 1 module complete all as specified and directed Make Legard Cat No: 6755 11 or equvalent in Simens / Crabtree
S & F 6/16 A socket 3 Pin 2 modules module complete all as specified and directed Make Legard Cat No: 6734 55 or equvalent in Simens / Crabtree.
S&F mdoular blank plate module 1 all as specified and directed.
S&F ceiling rose surface bakelite 65mm x 50mm three terminal all as specified and directed
S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings all as specified and directed
S & F double door Sheet metal enclosures factory made DBs 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 10 or equivalent in Simens/ Hager/ L & T
S&F isolators of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) (Note :- Make of the isolator should be the same as that of DB) for the following :-
MCB Single Pole of 240 volts 5-32 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4085-87 to 90,92,93,94,95 or equivalent in Hager/ L & T
MCB Single pole + Neutral 240 volts, 32 -63 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4086-17 to 20 or equivalent in Simens/ L & T
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to and including GIwire 4mm dia as earth lead up to 7.5 mtr length by means of bolts, nuts check muts and washers etc. of galvanised iron or steel all as shown in electrical plate No. 3 including provn of GI protection pipe light grade of 32mm bore upto 7.5m length and connected earth strip to earthing test point all as shown in electrical plate No. 3 of SSR Part - I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (rein forced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 20mm bore medium grade, wire mesh and lugs test point etc.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm connecting with 3 core flexible copper cable of size 1.5 Sqmm all as directed. Make- CG/Havells/ Orient
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out in harde /dense soil.
Cutting to existing GI pipe line upto 50 mm dia for taking connection up to 40 mm dia GI pipe including insertion of CI /GITee complete all as specified and directed including Exc & earth Work
Supply and lay in trenches/or on wall medium grade steel water tubing 25 mm bore galvanised with all fittings and joints etc complete
Supply and fix gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for for 25 mm bore.
M&L for sand cushioning for UG cables using dry river sand; gently punning down all as directed and specified. ( Note : For measurement purpose punned thickness shall be considered)
S&L un-reinforced pre cast concrete cable covers CLASS LV type 2, flat size size 250 mm x 150mm x 40mm to be laid transverse to cable
Supply Laying and jointing,LT under ground cable ,1100 volts grade,XLPE insulated,armoured with galvanised round steel wire or steel strip,electric power cables heavy duty,with multi stranded aluminium conductor,laid in trenches,ducts,fixed on poles/walls with proper size saddles and clamp laid under roads/path/drain/culverts or encored in GI pipe fixed & testing and commissioning complete all as specified of Size 10 Sqmm 2 core.
Supply and laying in trenches/fixed on pole with necessary clamps, nut, bolts etc GI pipe 40 mm dia light grade including necessary fittings as protection to Cable complete all as specified and as directed.
M&L for 5mm thick rendering in CM 1:3 on ceiling surfaces and finished even and smooth without using extra cement complete
M&L for preparing new surfaces plastered or un plasetred surfaces applying two coats of white wash on ceilling all as specified
DP COMPLEX
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .