Construction of kiosk room SPT at 220 kv ss Mubarkpur ug of 66 kv to 220 kv ss Mubarkpur

Earth work in excavation in all kinds of soil not exceeding 2.0mtr. depth i/e dressing in bottom and sides of trenches & subsequent filling around masonary in 15cm layers.

Shuttering for faces of concrete foundation & foundation beams & plinth Beams (vertical or Battering)

Centering and shuttering for faces of walls, parititions, retaining walls and the like (vertical or battering) including attached pilasters buttresses, etc.

Centering & Shuttering for columns (rect / square or polygonal in plain )

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels

Centring & shuttering for flat surfaces like slab etc

Cement concrete 1: 6: 12 with 40 mm stone aggregate

Cement concrete 1: 4: 8 with 40mm stone aggregate

Cement concrete 1: 2: 4 with stone ballast or shingle

RCC M-20 mechanically mixed,vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in fdn. And plinth

RCC M-20 mechanically mixed,vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in super structure

Damp proof course 7.5 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded.

Damp proof course 4 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration @ 1.65 kg per sqm laid hot and sanded

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

Extra for additional storey upto 4 metres above the top of structural roof of lower storey.

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Providing and fixing UPVC bend for rain water pipe as per IS: 14735 including joints complete as per specifications

Providing and fixing on wall face unplasticised rigid PVC rain water pipes single socketed conforming to IS: 4985, including fixing with clamps:- U-PVC pipes 110 mm dia.

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3

Providing CC Gola 1:2:4 ratio 10cm x 10cm size

Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects.

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling.

Conglomerate floor 40mm thick cement concrete topping 1:2:4.

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Plinth protection of Flat brick or tile flooring laid in cement sand mortar 1;4 on 100mm thick CC 1:8:16 &100mm Th sand filling &cement pointing 1:2 on top

Providing and laying vitrified floor tiles 600x600mm size premium quality,manufactured using Double charge Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement Mortar 1:4 for new flooring laid with cement based high polymer modified quick set tile adhesive of approved make IS 15477 marked using 5Kg adhesive per sqm of tile area in average 3mm thickness over existing base etc., complete

White glazed tiles 20 cm x 30 cm and 5 mm thick in skirting and dado on 12 mm thick cement plaster 1:4 in base an joined with white cement slurry in joints

10mm thick Cement plaster 1:3 under ceiling

12.5 mm thick cement plaster 1:4

12.5 mm thick Cement Plaster 1:5

20mm Cement Plaster 1:4 ratio

Extra for providing and mixing water proofing material in cement plaster work

20mm Cement Plaster 1:5 ratio

20 mm th. Vertical DPC of CP 1:3 with 2-coats of hot bitumen

Providing and fixing chicken mesh for brick work and RCC junction of galvanized low carbon wire, annealed wire of diametre 0.6 to 2.0mm distance between the faces of the hexagon 13 to 50mm complete in all respect.

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.43 litre/10sqm over and including base coat of water proofing Cement Paint applied

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

Cold twisted deformed (ribbed/ tor steel) Bars, for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.

Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (two module).

Wiring fan point with sheet metal fan box (shape hexagonal & sheet thickness not less than 1.60 mm) in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (two module).

Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.

Wiring call bell point

Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade

Wiring 3 pin 16/20 amp. power plug control and switch.

PVC insulated copper conductor single core cable (ISI marked) overall 1.5 sq.mm, 1100volts grade

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade

PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade

PVC insulated copper conductor single core cable (ISI marked) overall 6 sq.mm, 1100volts grade twin core

Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)

Heavy Gauge PVC Conduit Pipe 40mm dia. (Flushed)

Miniature circuit breaker single pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply

Miniature circuit breaker double pole 50, 63amp. (Breaking capacity 10kA, Curve-C)suitable for 240/ 415 volts 50cycles AC supply

Sheet metal double door S.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating MCB's/ RCBO/ RCCB's, 12 way each

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded For fixed portion and chaukhats

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded For shutters of doors, windows &

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded

Providing and fixing glazing in aluminium door 5mm thick glass, window, ventilator shutters and partitions etc.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS :6315 marked, for doors including cost of cutting

Powder coating to all aluminium sections

Disposal of surplus soil excavated from CC/RCC fdsn i/c loading unloadiing & disposal up to 0.5 km - 1.00 km

Landing Rate of materials including extra carriage and difference of rates of Coarse Sand

Extra carriage of Fine Sand

Extra carriage of Cement

Extra carriage of Steel

Landing Rate of materials including extra carriage and difference of rates of Bricks

Landing Rate of materials including extra carriage and difference of rates of Crushed bajri12/13.2mm

Landing Rate of materials including extra carriage and difference of rates of Crushed bajri10/11.2mm

Landing Rate of materials including extra carriage and difference of rates of S.Metal

P & F of 20 Watt Tube set LED type Havells Make

P & F ceiling fans standard make 1400mm sweep with regulator . Bajaj ,Crompton/G.E.C./ Philips/ GEC/Khaitan make.

P & F of 18” dia 1440 RPM single phase Exhaust fan with louvers of make Crompton Greaves /Philips India/ Bajaj /Genelac/ Khaitan as per Technical specification No. 20. The contractor should specify the make.

P & F of 12” dia 1440 RPM single phase Exhaust fan with louvers of make Crompton Greaves /Philips India/ Bajaj /Genelac/ Khaitan as per Technical specification No. 20. The contractor should specify the make.

Supply & Fixing 15 Watt Panel Trim Havells round downliter LED type

Supply & Fixing ceiling light of 42 watt 2' x 2' fitting Havells make of LED type

S & F general purpose tube fittings of crompton make on wall (ModelDIJB12414EB9) of 1x36 W

Providing & Fixing wire mesh of 22 Guage 12mm x 12mm in aluminium door & Windows

S/F of ferro-cement trench cover of 1000x460 mm

P&F of various size cable racks 40x40x6

P/F angle nosing of MS angle 50x50x3 mm

P/F MS checqured plate 5mm thick