EE(Elect.)/CNZ/2025-26/56-03

Supply of 1.5.sq .mm ISI mark ,FRLS PVC insulated, single core copper conductor cable.

Supply of 2.5.sq .mm ISI mark ,FRLS PVC insulated, single core copper conductor cable.

Supply of 4 .sq .mm ISI mark ,FRLS PVC insulated, single core copper conductor cable.

Supply of 25 mm dia. ISI marked ,PVC conduit

3 mm thick phenolic laminated sheet

Supply of S.P. 5/6 amps, one way switch, piano type ISI marked

Supply of S.P. 15/16 A, one way switch, piano type ISI marked

Supply of 3 pin 5/6 amps socket outlet, piano type ISI marked

Supply of 6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked

Supplying of 6 A to 32 A ratings, SP MCB, “C” curve, 10 kA breaking capacity.

Supplying of 40 A, 2 pole isolator.

2+6 way, SPN, single door, MCB DB

Supply of 10" (250mm) sweep 1250 rpm exhaust fan Fresh Air type complete with shutter ,blades etc as required

Repair/Rewinding of existing 1.0 HP mono block pumpset including replacement of parts like gun metal bush /bearings, condenser, impellar etc to make the pump functional as required.

SITC of single phase monoblock pumpset complete with all accessories workable of 240 Volts 50 Hz AC supply (a) 1 HP (0.75 KW) single phase pumpset head from 12-30 metre suction and delivery 25X25 mm.

Supplying of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD <10%,P.F.≥0.95,IP20, CRI >80, Flicker free,(flicker shouldbebelow5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trademark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).CRCA Sheet Body (Thickness > 0.50 mm) 18-22 watt

Supplying of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD <10%asperIEC61000-3-2,P.F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection,EMI-EMC as per CISPR -15 , lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT3000°K/4000°K /5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5year OEM warranty. System lumen efficacy 105 <120lm/Watt output.LM79&LM80Testreport from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 50 watt

Supply of XLPE insulated PVC sheathed Al. Conductor Un-Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-2C*4 sqmm

Providing 1 nos Skilled Labour/wireman for day to day maintenance of all CTs/PTs under central zone for the period of one day.