SPECIAL REPAIR FOR REPLACEMENT OF OLD DAMAGED HT XLPE UG CABLE JOINTS ALONGWITH CONNECTED ITEMS IN DIFFERENT LOCATIONS OF MASIMPUR MIL STN UNDER GE SILCHAR

Amount

Taking down unserviceable /damaged XLPE HT cable of any size and any type from trenches /poles/wall etc after necessary electrical disconnectin complete all as specified and directed.

Supplying, Laying connecting & testing XLPE insulated, PVC sheathed, armoured HT electric power UG cable (heavy duty with stranded aluminum conductor) of size 95 Sqmm, 3 core, 11000 Volts(Earthed) grade, with FRLS PVC outer sheathed, conforming to IS-7098 (Part-II) laid through duct/ pipe / in trench etc. with cable glands and including suitable size of aluminium lugs complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth for foundation of poles, laying of cables etc not exceeding 10 sqm on plan area and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm.thick complete all as specified and as directed .

Removing excavated material to a distance n.exc 50.00 metre and depositing/spreading where directed at a level n. exc 1.50 metre above the starting point complete all as specified and as directed .

Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of under ground cable including spreading and punning down complete all as specified and as directed. Note:- Punned down thickness shall be measured.

Supply and laying un-reinforced precast concrete cable cover, class HV type 1, with peak, flat size 300mm x 180mm x 40mm laid flat and dry in trenches over the cable complete all as specified and directed.

M & L for HT cable route indicator of 80 mm dia CI plate duly engraved ( cable HT 11 KV), bolted with 40x40x6mm MS angle iron member of height 0.6 mtr and embeded in PCC 1: 3:6 type C-2 (using 40 mm graded aggregated) of size 30cm x 30cm x 30cm block including necessary earth work complete all as specified and as directed.

S&F in replacement for cable jointing kit for 11KV (earthed) grade cable for straight through heat shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and as directed.

Supply and fixing end termination joint kit for HT cable, heat shrinkable, indoor type with jointing material & accessories suitable for voltage 11 kV (Earthed), 3 core 50 sqmm to 95 sqmm complete all as directed by Engr-in-charge.

Supply and fixing end termination joint kit for HT cable, heat shrinkable, outdoor type with jointing material & accessories suitable for voltage 11 kV (Earthed), 3 core 50 sqmm to 95 sqmm complete all as directed by Engr-in-charge.

Taking down unserviceable GI pipe of any size complete all as specified and as directed.

Supply and laying GI tubing 100mm bore light grade with fittings laid in trenches or for road crossing for protection of HT underground cables complete all as specified and as directed.

Materials and labour for PCC 1:3:6 type C2 (using 40mm graded stones) as in PCC foundation complete all as specified and directed by Engr-in-Charge

M/s Nice Traders (BID ID -3172139)