REPAIRS TO PLUMBING JOINERY SANITARY FITTINGS FLOORING AND VARIOUS BR WORKS IN CIVIL ZONE MES COLONY CAMERO OFFICERS MESS SNCOS MESS AIR MEN BILLETS OF CAMERO COMPLEX UNDER GE AF SUBROTO PARK

Amount

Demolition of cement concrete (unreinforced ) of any description and in any position not other wise specifically provided complete all as specified and as directed by Engr-in-Charge.

Demolition cement concrete reinforced(RCC) beam, staircases landing chajjas and similar work of any description and in any position complete all as specified and as directed by Engr-in-Charge.

Taking down steel tubing or removing from site of 15mm bore pipe complete all as specified and as directed by Engr-in-Charge.

All as above item No. 3 above but 20mm bore complete all as specified and as directed by Engr-in-Charge.

Dismantling existing tanks capacity 250 ltr but n.exc 500 ltr and removing complete all as specified and as directed by Engr-in-Charge.

Dismantling water storage tank exc.500 ltr capacity but not exc. 1000 ltr capacity complete all as specified and as directed by Engr-in-Charge.

Demolition of stone slab and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) & removing serviceable tiles to store and rubbish off the premises out side MD land complete all as specified and as directed by Engineer-in-charge

Demolition of brick work built in CM incl all quoins, pillars etc but excl ashlar facings, dressed stone work and precast concrete complete all as specified and as directed by Engr-in-Charge.

Taking down Chowkhats or frames with shutters without taking off shutters from frames exceeding 1.50 Sqm but n.exc 4.00 Sqm complete all as specified and as directed by Engr-in-Charge.

All as per item No. 10 above but not exceeding 1.50 Sqm complete all as specified and as directed by Engr-in-Charge.

Taking down shutter of any description not exc. 1.00 sqm each removing to store complete all as specified and as directed by Engr-in-Charge.

Taking down shutter of any description exc. 1.00 sqm but n.exc 2 sqm each and removing to store complete all as specified and as directed by Engr-in-Charge.

S&F factory made 35 mm thick 2 nd class hard wood glazed and Skelton shutter open rebated and prepared to receive glass or gauge etc. divided into squares with plain chamfered or rounded metered beads complete all as specified and as directed by Engr-in-Charge.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm double side prelam PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed by Engr-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.

S&F steel window with side hung shutter including projecting/box type hinges enluding steel handles steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed by Engr-in-Charge.

S&F steel ventilator top hung shutters including steel handle, peg stay and box type hinges complete complete all as specified and as directed by Engr-in-Charge.

M & L for Mild Steel framed work as in grill/grating guard bars etc ends of bars shouldered and or reverted complete all as specified and as directed by Engr-in-Charge.

S&F windows/ventilators section of frame 72 X 55 fixed to wall or concrete surface with ms hold fast (30 x 5 section) 150 mm long made of galvanized steel powder coated and section of shutter 47 X 20 mm mulion section 72 X 50 mm (Base steel as per IS 513 "D" quality galvanozed as per IS 277 with zinc of 120 gms/ Sqm ) glazed or guaged and wire guage shutter prepare to recieve wire mess to the shutters ( Double door shutter) with total coated thickness of 0.60 mm including powder coated grill/guard bars made of surface bars 10 mm dia at 100 c/c horizontal spacing fixed in ms flat frame ( 30 x 5 mm ) fixed to windwods frames with screws incl 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40 mm aparture neccessary fittings and all builders hard ware such as handles ,tower bolts, and stays etc. complete all as specified and shown in Drg No : CEAF/STD-191/2014 Sheet No 1/2 and 2/2 dated 11-12-2014.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. with Fe 410-W Gde E-250 quality A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete complete all as specified and as directed by Engr-in-Charge.

M&L for 18/19 mm thick prelaminated particle board (MDF), interior grade, prelaminated both sides with decorative choice lamination fixed with screws to frame work complete all as specified and as directed by Engr-in-Charge.

M&L for 12 mm thick prelaminated particle board (MDF), interior grade, prelaminated both sides with decorative choice lamination fixed with screws to frame work complete all as specified and as directed by Engr-in-Charge.

M&L for 18/19 mm thick Block boards, grade 2 quality,interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed by Engr-in-Charge.

S&F 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm long butt hinges medium weight mild steel alloy with galvanised complete all as specified and as directed by Engr-in-Charge.

M&L for 2nd class soft wood, plain fillets square, rectangular or triangular in sectional area not exc 3sqcm, clean sawn, secured with nails or brads etc complete all as specified and as directed by Engr-in-Charge.

S&F in repair 75 mm size hasp and staple mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-Charge.

S&F in repair Continuous piano type hinges stainless steel 30 mm flap size complete all as specified and as directed by Engr-in-Charge.

S&F aluminium anodised, barrel tower bolts of extruded section and length of bolt 75 mm complete all as specified and as directed by Engr-in-Charge.

S&F 100mm long aluminium anodised handles cast type complete all as specified and as directed by Engr-in-Charge.

S&F 150mm long aluminium anodised handles cast type complete all as specified and as directed by Engr-in-Charge.

S & F 100mm long aluminium anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and as directed by Engr-in-Charge.

S & F 150mm long aluminium barrel tower bolts of extruded section and fixed to shutter complete all as specified and as directed by Engr-in-Charge.

S&F door stopper of aluminium , alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness size,quility or description complete all as specified and as directed by Engr-in-Charge.

S & F sheet glass 4 mm thick ground or obscured or frosted, on one side complete all as specified and as directed by Engr-in-Charge.

S&F in repair Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-Charge.

S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement upto 4 storeys building complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on Bk surfaces on fair face of brick work and finished even and smooth w/o using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for 5 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth w/o using extra cement as in ceiling complete all as specified and as directed by Engr-in-Charge.

M&L for preparing surfaces of new plaster on walls and applying two coats of cement base paint over a coat of alkali resitant primer complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new surface and applying three coat of white wash on ceiling acomplete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new surface and applying two coat of distemper on wall complete all as specified and as directed by Engr-in-Charge.

M&L for two coat of synthetic enamel paint over a coat of red oxide primer on steel surface not exc 10cm in girth, complete all as specified and as directed by Engr-in-Charge.

M&L two coats synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.

M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and as directed by Engr-in-Charge.

S & F in repair 32mm dia aluminium powder coated wooden finish drapery rod made out of 1mm thick aluminium complete all as specified and as directed by Engr-in-Charge.

S&F for aluminium powder coated fancy type side bracket (Lattoo) for curtain rod complete all as specified and as directed by Engr-in-Charge.

S&F wall bracket for drapery rod as per sample approved by Engr-in-Charge.

Cutting of vegitable plants from roof, terrace, chajjas, walls etc digging out the roots and making good the surfaces in PCC 1:2:4 type B1 with surface finished to match complete including scaffolding upto 4 storey buildings etc complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with subclass B bricks, straight or curved on plan to any radius built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L cement concrete type B1 1:2:4 (20 mm graded aggregate) as in benching/copings all as specified and directed.

S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing complete all as specified and as directed by Engr-in-Charge.

S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge,manufecturer's specifications and drawing complete all as specified and as directed by Engr-in-Charge.

S&F factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side(wall side) and also manufacturer's test report and test certificate is mandatory with each and every supply of the materail complete as per directions of Engineer-in-charge, manufecturer's specifications and drawing.

S&F 100 mm size Stainless Steel handle complete all as specified and as directed by Engr -in - Charge.

M &L for 50 mm magnetic catches and fixed complete all as specified and as directed by Engr-in- Charge.

S&F Stainless Steel Piano hinges width of flap when open 38mm complete all as specified and as directed by Engr -in - Charge.

S&F 40mm dia, cupboard knobs fixed with nuts, screws and washers of stainless steel bright finish complete all as specified and as directed by Engr-in-Charge.

S&F 125 mm size of hasp & staple safety type Stainless Steel with mild steel hinge pin including bolt to heinge plate and fixed with screws complete all as specified and as directed by Engr-in-Charge.

S &F Plain,solid,straight chowkats and frames of 2nd class hard wood,wrought,frameed rebate on the solid, rounded or chamfered,put together with glue pinned at joints,supplied and fixed complete all as specified and as directed by Engr-in-Charge.

S&F 500 ltr rotational moulded polythene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

S/F rotational moulded vertical water storage tanks with closed tops ( cylinderical ) hoisted and fixed in position 1000 ltr capacity incl disconnecting and refixing the existing GI fitting and pipe complete all as specified and as directed by Engr-in-Charge.

S/F rotational moulded vertical water storage tanks with closed tops ( cylinderical ) hoisted and fixed in position 2000 ltr capacity incl disconnecting and refixing the existing GI fitting and pipe complete all as specified and as directed by Engr-in-Charge.

Disconnecting existing tanks exc 250 but not exc 500 Litres , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed by Engr-in-Charge.

All as per item No. 70 above but exc 500 but not exc 1000 Litres complete all as specified and as directed by Engr-in-Charge.

S&F in repairs of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and as directed by Engr-in-Charge.

S&F 15mm bore steel water tubing medium grade , galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.

All as per item No. 73 above but 20mm bore complete all as specified and as directed by Engr-in-Charge.

S&F in repair gate valves gun metal with iron wheel head screwed both ends for iron pipes and fixed 20mm fixed in repair complete all as specified and as directed by Engr-in-Charge.

S&F in repairs bib taps, cast copper alloy, fancy type with crutchor butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15mm bore complete all as specified and as directed by Engr-in-Charge.

S&F in repairs angle valve ,stop valve, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and as directed by Engr-in-Charge.

S&F in repairs pillar tap, cast copper alloy, chromium plated, with capston heads screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed by Engr-in-Charge.

S/F in repairs central hole basin mixture without popup waste system and 450 mm long braidaed hoses chromium plated etc incl CP wall flange complete all as specified and as directed by Engr-in-Charge. Make : Cat part No. 9350 of Prayag or equivalent .

S/F in repairs central hole sink mixture without popup waste system and 450 mm long braidaed hoses chromium plated etc incl CP wall flange complete all as specified and as directed by Engr-in-Charge. Make : Cat part No. 9350 of Prayag or equivalent .

S&F anti skid ceramic tiles area of each tiles exceeding .06sqm but not exceeding 0.18 Sqm and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match over and including 15mm thick screed in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.

All as per item No. 82 above but in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

S&F glazed ceramic wall tiles area of each tiles exceeding .06sqm but not exceeding 0.18 Sqm and 7mm thick as in wall set & jointed in neat cement slurry & pointed in coloured cement to match over and including 15mm thick screed in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L for 20 mm thick granite stone (any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment (1:2) to match the shade of stone including cutting and polishing as in floors laid over and including 15mm thick screed bed in cement mortar 1:6 complete.on cooking / working platform complete all as specified and as directed by Engr-in-Charge.

Material and labour PCC 1:4:8 as in mass concrete in floors and sunken portion complete all as specified and as directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection including making joints and filling with sand bitumen mastic complete all as specified and as directed by Engr-in-Charge.

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and as directed by Engr-in-Charge. Make : Neelkamal / Diamond / Summer.

S&F in repairs stanless steel rack for kitchen utensil made out of 22 gauge sheet & overall size 900mm x 750mm fixed to wall with scews complete all as specified and as directed by Engr-inCharge.

S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Vitreous China wash basin 450mm x 300mm, white, flat back including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by Engr-in-Charge.

S&F vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and as directed by Engineer-in-charge. Make : Hindware / Parryware

S&F in repairs viterious china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe)incl P or S trap etc complete all as specified and as directed by Engr-in-Charge.

S&F in repair PVC flushing cistern of 10 ltr capacity valveless, symphonic action type, low level, white with inlet, ball valve, float and handle including flush pipe of 32mm bore PVC and connection to pipes etc complete all as specified and as directed by Engineer-in-Charge. Make : Commander / Hindustan.

S & F in repair of plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engr-in-Charge.

Taking down PVC SWR pipes 110 mm or 75mm mm bore complete all as specified and as directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc complete all as specified and as directed by Engr-in-Charge.

All as per item No. 97 above but 75mm dia complete all as specified and as directed by Engr-in-Charge.

S&F PVC SWR floor trap with grating including jointing with solvent cement 75 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F PVC SWR bends 110 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F PVC SWR bends 75 mm complete all as specified and as directed by Engr-in-Charge.

S&F PVC SWR Branch piece 75 mm double (Double T) provided with access door equal or unequal complete all as specified and as directed by Engr-in-Charge.

S&F 110 mm PVC SWR Junction single (Single T) provided with access door complete all as specified and as directed by Engr-in-Charge.

S&F PVC SWR vent cowl of size 110 mm complete all as specified and as directed by Engr-in-Charge.

S&F PVC SWR vent cowl of size 75 mm complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 100 mm dia cast iron soil waste pipe sand cast pipes and vent pipe in any length with or without ears with cement joints fixed to wallS&Floors etc complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 75 mm dia cast iron soil waste pipe and vent pipe in any length with or without ears with cement joints fixed to walls & floors etc complete all as specified and as directed by Engr-in-Charge.

S&F in repairs CI floor trap incl jointing to waste pipe in run lead with dia of out let 75 mm complete all as specified and as directed by Engr-in-Charge.

S&F in repair bends any radius diminishing -pieces or taper 100 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F in repair bends any radius diminishing -pieces or taper 75m m dia complete all as specified and as directed by Engr-in-Charge.

S&F of branch pieces, single(equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F of branch pieces, single(equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PVC cabinet mirror of size 470 mm x 570 mm x 120mm complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Tubular towel rail chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engr-in-Charge.

S & F repair CP Soap dish complete all as specified and as directed by Engr-in-Charge. Make : BA-45 of Payag or equivalent

S & F repair corner glass shelf with bracket complete all as specified and as directed by Engr-in-Charge. Make : BEA-46 of Prayag or equvelent

S & F in repair hand shower( health faucet ) with 1.0 m long tube and hook complete all as specified and as directed by Engr-in-Charge. Make : BEA-40S of Prayag or equvelent

.S&F in repair 32mm bore mild steel chromium plated waste coupling fixed to waste pipe and wash hand basin complete all as specified and as directed by Engineer-in-Charge.

S&F for 15mm bore PVC connection 450mm long with brass nuts on both ends complete all as specified and as directed by Engr-in-Charge.

S&F in repair chromium plated shower rose 125mm size with or without swivel joint and fixed for 15mm bore pipe complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel multipurpose cloth hangers consisting 4 prongs complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel multipurpose cloth hangers consisting 6 prongs complete all as specified and as directed by Engr-in-Charge.

S&F for steel framed work such as grills , greatings, tank staging etc with ends of bars shouldered or welded as in frame work etc complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick rendering of ready mix mortar having ratio euaivalent to CM 1:6, on brick work or concrete surfaces on wall and finished the surface even and smooth complete all as specified and as directed by Engr-in-Charge. Make : SIKA / Dr Fixit / Ascolite or equivalent as approved by GE.

M&L for 5 mm thick rendering with ready mix mortar having ratio euaivalent to CM 1:3, on concrete surfaces as on ceiling, soffit of stair case, chhajjas facia etc including cement slurry etc finished the surface even and smooth complete all as specified and as directed by Engr-in-Charge. Make : SIKA / Dr Fixit / Ascolite as approved by GE.

M & L for rendering 15mm thick in ready mix mortar having ratio euaivalent to CM 1:4, on brick work or concrete surfaces on wall and finished even and smooth without using extra cement mixed complete all as specified and as directed by Engr-in-Charge. Make : SIKA / Dr Fixit / Ascolite as approved by GE. Note : rendering upto 4 storeys building height complete all as specified and water proofing compound shall be measured and paid separately.

M/S MG GROUP

Hindustan Co.Co

JAIPAL AND BROTHERS

J D ENTERPRISES

High Tech Metal India

Ashish Sehgal and Co.

Mahesh Enterprises

Rishi Constructions