CONSTRUCTION OF WASH ROOM AND WC FOR INLIVING SAILORS ACCN FOR NEW SQUADRON, ADDN/ALTN OF INLIVING SAILORS ACCN FOR NEW DORNIER SQUADRON, FIXING OF CERATIN ELECTRICAL EQUIPMENTS, PROVN OF INTERLOCKING TILES AND ADDN/ALTN OF EXISTING KITCHEN AT MEENAM

Amount

Material and labour TMT Bars of 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Returning and filling including spreading levelling watering and well ramming in layers not exceeding 25 cm , complete all as specified and directed.

Material and labour for Brickwork with fly ash bricks, old size straight or curved on plan exceeding 6 metre means radius built in CM (1:6), complete all as specified and directed.

Material and labour for 15 mm thick rendering on other than fair faces of brickwork in CM (1:6) finished fair and even without extra cement, complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

Supply and fixing 20mm bore fancy type stop valves for shower with long shank and cup (concealed type) cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe and fixed all as specified and as directed.

Supply and fixing stop valves, fancy type chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm complete all as specified and directed.

Supply and fix Pillar taps, cast copper alloy, with capstan heads, chromium pated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed both sides, for 15 mm bore of pipe complete all specified and directed.

Supply and fix Bib taps, fancy type, chromium plated, cast copper alloy, with long body with crutch or butterfly handle, screwed down, screwed for brass ferrule for 15mm bore of pipe complete all specified and directed.

Material and labour for preparation of old plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant priming paint complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame all as specified and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and as directed.

Material and labour for 350 x 450 x 7mm thick coloured glazed ceramic tiles on vertical surfaces such as skirting, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including 10 mm thick backing coat in cement mortar (1:4) all as specified and as directed.

Material and labour for coloured joint free non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm in floors etc.., set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including screed bed 15 mm thick in cement mortar (1:6) etc complete all as specified and as directed.

Supply and fixing for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Supply and fixing 32 mm dia waste coupling, PTMT, half or full threaded, minimum weight of 45 Gms each, complete all as specified and as directed.

Supply and fixing PVC waste pipe, 32mm dia, 600mm length as in waste pipe to WHB/urinal/sink complete all as specified and as directed.

Supply and fixing GI tubing, medium grade, 15 mm bore with all fittings and connections and fixing complete to walls, floors or ceilings ,all as specified and directed.

Supply and fixing GI tubing, medium grade, 20 mm bore with all fittings and connections and fixing complete to walls, floors or ceilings ,all as specified and directed.

Supply and fixing in repairs 10 litre capacity, PVC flushing cistern, white, symphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, brackets etc , including brackets and 32 mm dia PVC flush pipe of 60 cms long, complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks 500 ltrs capacity, three layered (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

Supply and fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement as specified and directed

Supply & fix PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Supply & Fix PVC (SWR) pipe 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Supply & Fix PVC (SWR) bends 75mm bore any radius complete all as specified and directed.

Supply & fix PVC (SWR) bends 110 mm bore any radius complete all as specified and directed.

Supply & Fix PVC (SWR) bends 110 mm with access door all as specified and directed

Supply & Fix PVC (SWR) bends 75 mm bore with access door complete all as specified and directed

Supply and fixing in repairs of Vitreous china wash down water closet, standard pedestal pattern, white, (excluding fixing bolts, flushing cistern and flush pipe) with pedestal pan and "P" or "S" trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc, complete all as specified and as directed.

Supply and fixing in repairs vitreous china squatting pan Orissa pattern long pan of size 580 x 440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern) including "P" or "S" trap complete all as specified and as directed.

Supply and fixing in repair shower rose, brass, chromium plated, of size 125 mm, with or without swivel joint, including fixing to 15 mm bore of pipe all as specified and directed.

Supply and fixing in repair aluminium alloy, anodised sliding door bolts with hasp, staple and fixing bolts, of extruded section or cast aluminium alloy and length of bolt 300 mm complete all as specified and as directed.

Supply and fixing in repairs 12 mm thick Prelaminated particle board, Prelaminated with both side decorative choice lamination, exterior grade, fixed as in shutters/ shelves of cupboards, wall panelling, door inserts etc... complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash hand basin, white, flat back of size 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, waste coupling brass CP, 32 mm dia with long screwed shanks and fly nuts flange, cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed.

Supply and fixing in repairs Glass wash basin, oval/round/rectangular type, basin overall size 450 x 600 mm, depth of basin not less than 152 mm, including all fittings complete all as specified and directed.

Supply and fixing powder coated galvanised iron snap grid frame work of false ceiling including vinyl laminated MPI gypsum panels (GYPTECH) 9 mm thick of size 600 x 600 mm fixed with staples on snap grid and suspending the grid on RCC Slabs including hanger 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made upto of GI (upto 1200 mm length) flat 40x3 mm, size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long etc., complete all as specified and as directed

Supply and fixing Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden plastic cleats (minimum weight 190 Gms), complete all as specified and directed.

Supply and fixing Grating doom 125 mm dia of PTMT (minimum weight 40 gms) fixed over floor trap/nahanitrap complete all as specified and directed.

Supply and fixing 15mm dia Gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified and directed.

Supply and fixing Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of both of pipe 15mm as in repairs complete all as specified and directed.

Supply and fixing in repairs hasp and stable, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws of size 100mm complete all as specified and directed.

Supply and fix 40mm dia cupboard knobs fixed with nut, screws and washers of brass polished, complete all as specified and directed.

Supply and fixing 100 mm aluminium anodised butt hinges of extruded brass, with mild steel hinge pin anodised and fixed in repairs complete all as specified and directed.

Supply and fixing 100 mm Aluminium handles, cast type, anodised etc all as fixed in repair complete all as specified and directed.

Supply and fixing Brass Mortice lock vertical type, size 100 mm size complete as in repairs complete all as specified and directed.

Supply and fixing 100mm Long hooks and eyes aluminium plate type II complete all as specified and directed.

Supply and fixing 40 mm dia aluminium, anodised, barrel tower bolts of extruded section and fixed in repairs complete all as specified and directed.

Supply and fix in repairs 100 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing 20 mm Chromium Plated conduit for curtain rod including bracket fixed in pelmet boxes as in repairs and complete all as specified and directed.

Supply and fixing 100 mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring as in repair complete all as specified and directed.

Fixing only ceiling fans, 1200 mm sweep, electric driven, single phase, of any make, complete all as specified and directed.

Fixing only exhaust fans, 300 mm sweep, electric driven, single phase, of any make, complete all as specified and directed.

Fixing only exhaust fans, 450 mm sweep, electric driven, single phase, of any make, complete all as specified and directed.

Fixing only recessed, 2 x 2, 36 Watt, single phase LED lights, of any make and type, complete all as specified and directed.

Fixing only LED tubes, four feet, 20 W, single phase, of any make and type, complete all as specified and directed.

Fixing only LED tubes, two feet, 10 W, single phase, of any make and type, complete all as specified and directed.

Fixing only 100W modular fan regulator, of any make and type, complete all as specified and directed.

Laying and testing of XLPE heavy duty cables, insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) with stranded aluminium conductor , 1.1KV of size 3.5 core 70 sqmm, laid in trenches, complete all as specified and directed.

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5 mtrs deep in hard/dense soil for laying underground cable laying pipes etc complete all as specified and directed

Removing surplus soil to a distance not exceeding 50m and depositing at a level not exc 1.5 m above the starting point complete all as specified and directed

Material and labour for sand filling in trenches including spreading in trenches for cushioning of LT UG cable complete all as specified and directed. Note : (i) Only punned thickness of sand shall be measured for payment. (ii) Riddled earth shall be used for sand cushioning after obtaining approval from AGE (I).

Supply and lay burnt clay bricks, sub class "B", Designation 75, keeping the width of the brick parallel to the length of the cable complete all as specified and directed.

Cutting the existing road/hard standing (size 40 cm width and 50 cm depth) for passing pipes/ cable in trenches and making good the disturbed surface by using PCC (1:2:4) type B1 using 20mm graded aggregate at the top for a depth of 15 cm and remaining depth to be covered with excavated soil, and painting with black paint, if necessary, to match with existing road, complete all as specified and directed. Note: Rates for soil filling shall be considered in relevant items of returning and filling.

Laying and testing of XLPE heavy duty cables, insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) with stranded aluminium conductor , 1.1KV of size 3.5 core 70 sqmm, mounted on wall, complete all as specified and directed.

Supply and lay in trenches GI pipe light grade for cable protection of size 50mm dia complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cms and getting out in any type of soil complete all as specified and directed.

Material and labour for hard core gauge exc 63 mm but not exceeding 100 mm broken stone or boulders, deposited spread and levelled in layers not exceeding 15 cm thick, watered, rolled and rammed to a true surface complete all as specified and directed.

Material and labour for sand cushioning, consolidated thickness of 50 mm, laid over sub-base for laying interlocking tiles, complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver blocks, any shape and size, 60 mm thick, M-35 grade confirming to IS-15658-2006, complete all as specified and directed.

Material and labour for providing plain cement concrete (1:2:4) type B1, using 20 mm graded stone aggregate as in mud stops, rounded or chamfered on edges,channels,benching of manholes including necessary formwork complete all as specified and as directed.

Material and labour for cement concrete tiles 200 x 200 x 25 mm, machine pressed, set jointed and pointed in neat cement slurry in floors with grey cement and red pigment, cut and polished laid over and including 20 mm thick screed plaster in cement mortar (1:6) complete all as specified and as directed.

Material and labour for Granite or trap Stone kerb of roughly squared stones of size 15 x 30 cms, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20 mm for the rest of surfaces, jointed in cement mortar (1:6) and struck flush, complete all as specified and directed.

Material and labour for plain cement concrete (1:2:4) type B-1, 100 mm thick (using 20mm graded stone aggregate) as in floor, sub base and base course including necessary form work complete all as specified and as directed

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ , complete all as specified and as directed

Forming contraction joints (Dummy Joints) joints 65 mm deep x 10 mm wide, filled with sealing compound, grade 'Á' complete all as specified and as directed

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5 mtrs deep in soft/loose soil, complete all as specified and directed

Material and labour for providing plain cement concrete (1:3:6), type C2 using 40mm graded stone aggregate as in coping for poles including necessary form work etc complete all as specified and as directed.

Material and labour for brick work built in cement mortar 1:4 using old size bricks, straight or curved on plan exceeding 6 mtrs mean radius complete all as specified and as directed.

M & L for plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in channel benching including necessary form work complete all as specified and as directed

Material and labour for providing plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping on brickwork, complete all as specified and as directed.

Material and labour 15mm thick cement plaster in CM 1:4 on fair faces of brick wall/concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Material and labour precast RCC slabs 1:2:4 (type B1) using 20mm graded crushed stone aggregate for channel cover and providing proper provision for handle and set in cement mortar (1:4), including necessary shuttering, complete all as specified and as directed.

Supply and fixing MS Flat iron clamp for slabs including necessary drilling, bolting or rebating conforming to Fe-290 Gde-E-165, complete all as specified and directed

Material and labour for fabrication of kitchen base unit with 18 mm boiled water proof plywood ISI marked termite free with double laminate HD Gloss finished box, Drawers with shutters and carcass inclusive of all necessary hard ware ad fittings complete all as specified and directed

Material and labour for fabrication of kitchen wall unit with 18mm commercial plywood ISI marked termite free with Double side Laminate, HD Gloss with Double side Laminate finished box with shutters and carcass inclusive of all necessary hardware and fittings as specified and directed

Material and labour for fabrication of kitchen tall unit with 18mm Commercial plywood ISI marked termite free with Double side Laminate HD gloss with Double side Laminate finished box with glass shutters and carcass inclusive of all necessary hard ware and fittings complete all as specified and directed

Material and labour for fabrication of kitchen entrance tall unit with 18mm commercial plywood ISI marked termite free with Double side Laminate HD Gloss with Double side Laminate finished box with glass shutters and carcass inclusive of all necessary hard ware and fittings complete all as specified and directed

Material and labour for fabrication of snacks bar unit with 18mm commercial plywood ISI marked termite free with Double side laminate HD Gloss with Double side laminate finished box with shutters and carcass inclusive of all necessary hard ware and fittings complete all as specified and directed

Material and labour for fabrication of bar unit with 18mm commercial plywood ISI marked termite free with Double side laminate HD Gloss with Double side laminate finished box with shutters and carcass inclusive of all necessary hard ware and fittings complete all as specified and directed

Supply and Fixing of 101 X 508 x 609 mm CUTLERY basket of SS 304 Quality as specified and directed by Engineer in charge Make: Hettich / Ebco

Supply and Fixing of 101 X 508 x 609 mm PLAIN BASKET of SS 304 Quality as specified and directed by Engineer in charge. Make: Hettich / Ebco

Supply and Fixing of 101 x 305 x 76 mm WINE GLASS HOLDER, SS 304 Quality as specified and directed by Engineer in charge

Supply and fixing of Island hoods Chimni, Wall mounted decorative series kitchen hood with stainless steel & mirror glass finish, 90cm wide, 1000 m3/hr suction power, baffle filters, four 2W LED bulbs, electronic touch control, 3 speed functions, intensive speed, 30 minute delay off, filter alarm, 24 hour mode, speed control, remote control etc.. complete all as specified and directed. Make: Faber Stilux Isola Plus LTW 90 or equivalent in Bosch/Glenn as approved by AGE (I)

Supply and fixing of 5 BURNER gas hob, 3 x 3 KW Mini Triple Ring + 2 x 1.7 Dual Ring burners , auto ignition technology, cast iron pan supports, complete as specified and directed, Make: Faber Nexus 5 Burner Gas Hob (HT905 CRS BR CI) or equivalent in Bosch/Glenn as approved by AGE (I)

Demolition of brickwork or stone/ boulder masonry build in cement mortar including arches, pillars etc… complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed.

Taking down of shutters exceeding 1.5 sqm each but not exceeding 4 sqm all as specified and as directed.

Taking down cement plaster on brick or stone walls including ceilings etc., including racking out joints, hacking for key scrubbing down with water complete all as specified directed.

Cutting chases in brick work, pinning in making good to facing where required and pointing to cement mortar (1:3) to ends for concealed water tubing and making good for cutting exceeding 10 cm and not exceeding 20 cm girth all as specified and as directed.

Supply and fixing sheet glass 3 mm thick, ordinary quality, in squares, not exceeding 0.5 sqm in each pane in aluminium/iron/wooden framework, including rubber beading and cleats as required, complete all as specified and as directed.

Material and labour for brick work as in half brick walls, built in cement mortar 1:4 using fly ash "B" bricks, straight or curved on plan exceeding 6 mtrs mean radius, complete all as specified and as directed.

Material and labour for vitrified ceramic tiles 8 to 10mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including screed bed 15 mm thick in cement mortar (1:4) etc.. complete all as specified and as directed.

Supply and fix for flush shutter, 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6/8 mm thick polished teakwood lipping around the door fixed properly with nails, complete all as specified and as directed.

Supply and fixing aluminium alloy, anodised sliding door bolts with hasp, staple and fixing bolts, of extruded section or cast aluminium alloy and length of bolt 250 mm complete all as specified and as directed.

Supply and fix 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing 125mm Aluminium handles, cast type, anodised etc complete all as specified and directed.

Taking up or down 15 mm dia bore steel tubing, galvanized including all connections including cleaning for refixing in old/new position, complete all as specified and as directed.

Taking up or down 20 mm dia bore steel tubing, galvanized including all connections including cleaning for refixing in old/new position, complete all as specified and as directed.

Supply and fixing GI tubing, medium grade, 15 mm bore with all fittings and connections and fixing complete to walls, floors or ceilings, complete all as specified and directed.

Supply and fixing GI tubing, medium grade, 20 mm bore with all fittings and connections and fixing complete to walls, floors or ceilings, complete all as specified and directed.

Refixing of 15 mm dia old steel tubing and connections in new or old position complete to walls, ceiling floors etc..complete all as specified and directed.

Refixing of 20 mm dia old steel tubing and connections in new or old position complete to walls, ceiling floors etc..complete all as specified and directed.

Supply and fix in repair, Brass chromium plated tubular towel rail, 20 mm fancy type, 60 cm long between flanges including fancy brass chromium plated brackets on both sides, fixed with steel screws and wooden/rawl plugs, complete all as specified and as directed.

Supply and fixing in repairs Bib taps, fancy type, chromium plated, cast copper alloy, with long body with crutch or butterfly handle, screwed down, screwed for brass ferrule of bore of pipe 15mm complete all specified and directed.

Material and labour 10mm thick cement plaster in CM (1:4) on any face of brick wall/concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

Material and labour complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Material and labour complete removal of existing treatment on walls and applying two coats of exterior weather coat emulsion paint over a coat of primer and over 2-3 mm thick wall care putty, complete as per manufacturers instructions and all as specified and as directed.

Material and labour for fixing Granite (Classic G-15 type) , 18mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a including a screed bed 15 mm thick in CM (1:4),over brushing of cement slurry @ cement 3 kg/sqm complete all as specified and directed.

Supply and fix in repairs Stainless steel kitchen sink made out of 1mm thick, with drain board, overall size 910 x 420 mm and bowl size of 410 x 330 x 160 mm, with plugs, washers and wastes, including bedding in cement mortar (1:4) fixed to kitchen platform or fixing with CI cantilever brackets and connecting union to pipe and including 40 mm dia CP waste coupling, complete all as specified and as directed. Make : Nirali/Neelkanth/Diamond

DJ Group

VIJAYALAKSHMI ENTERPRISES

Banyan Engineers and Contractors