OGSEP, PumpHouse Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin.

OGSEP, PumpHouse: Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin. TENDER NOTICE NO.: C/1437/2026

FINANCIAL INFORMATION

NAME OF THE CONTRACTOR

TURNOVER OF CONTRACTOR /BIDDER FOR LAST FIVE YEARS

Financial Analysis - Details to be furnished duly supported by figures in balance sheet/profit & loss account for the last five financial years duly certified by the Chartered Accountant,as submitted by the Applicant to the Income Tax Department(Copies to be scanned & uploaded).

S. No Financial Year Gross Annual Turnover on Construction Works/ Works Contract (Rs. In Lakhs) Profit/loss(Rs. In Lakhs) Remarks

Financial arrangements for carrying out the proposed work.

Solvency certificate from bankers of the bidder(attached sepearately in FORM-B)

Signature of the Bidder (s)

OGSEP, PumpHouse: Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin. TENDER NOTICE NO.: C/1437/2026

NAME OF THE CONTRACTOR

SOLVENCY CERTIFICATE DETAILS

S. No Type of solvency Name of Bank Solvency Amount in Lakhs Issue Date (dd-mm-yyyy)

Signature of the Bidder (s)

NOTE: This table is meant for data

1 The original bankers certificate should be on letter head of bank as per form-B of the tender document.

2 In case of partnership firm,certificate should include names of all partners as recorded with the bank

OGSEP, PumpHouse: Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin. TENDER NOTICE NO.: C/1437/2026

DETAILS OF ALL WORKS OF SIMILAR NATURE COMPLETED DURING THE LAST SEVEN YEARS AS ON THE BID SUBMISSION DATE

NAME OF THE CONTRACTOR

S. No. Name of the work/Project and location Owner of sponsoring organization Cost of work Rupees (in Lakhs) Date of commencement as per contract Stipulated date of completion Actual date of completion Litigation/arbitration case pending/ in progress with details * Name and address/telephone number of officer to whom reference may be made for the work Remarks

* Indicate gross amount claimed and amount awarded by the Arbitrator

Signature of the bidders(s)

OGSEP, PumpHouse: Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin. TENDER NOTICE NO.: C/1437/2026

Projects under Execution or Awarded

NAME OF THE CONTRACTOR

S. No. Name of the work/Project and location Owner of sponsoring organization Cost of work rupees in lakhs Date of commencement as per contract (dd-mm-yyyy) Stipulated date of completion (dd-mm-yyyy) Actual date of completion (dd-mm-yyyy) Percentage progress of work. Litigation/arbitration cased pending/ in progress with details * Name and address/telephone number of officer to whom reference may be made Remarks

(i)* Indicate gross amount claimed and amount awarded by the Arbitrator

(ii)Applicant may submit separate form for giving details of work(completed) for each year to fill up the details as above.Separate sheets if any shall be numbered in sequence.

(iii)The scanned copies of the work orders for each work be uploaded.BOQ shall be furnished at a later date on request.

(iv)Certified that the above list of works is complete and no work has been left-out and the information given is correct to my knowledge and belief.

(v)The hard copy of all similar works completed during last seven years as on the previous day of date of submission date shall also be submitted on or before due date.

Signature of the Bidder (s)

OGSEP, PumpHouse: Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin. TENDER NOTICE NO.: C/1437/2026

PERFORMANCE OF WORKS

NAME OF THE CONTRACTOR

S. No. Name of the work/Project and location AGREEMENT N0 Cost of work rupees in lakhs Final completion value in lakhs Date of commencement as per contract (dd-mm-yyyy) Stipulated date of completion (dd-mm-yyyy) Actual date of completion (dd-mm-yyyy) extension of time with or without levy of penality or to be decided Amount of compensation for delay levied amount of reduced rates Perfrmance -to indicate very good/good/fair/poor Remarks

1 2 3 4 5 6 7 8 9 10 11 quality finance tech prof resources Gen behaviour 10

* Indicate gross amount claimed and amount awarded by the Arbitrator

OGSEP, PumpHouse: Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin. TENDER NOTICE NO.: C/1437/2026

NAME OF THE CONTRACTOR

S. No. Description of the item Details Remarks

1 Contractors name with address

Contact person name

2 Legal status of the bidder (a)An Individual( b)Proprietary firm (c) A firm in partnership (d) A limited company or Corporation-Attach copy of Legal document

3 Names and Titles of directors & Officers with designation to be concerned with this work

4 Designation of Individual authorised to act for the organisation

5 Was the bidder ever required to suspend construction for a period of more than 6 months(If so,give the details)

6 Registration of contractors

Financial Limit

Date of Registration

Address of the issuing authority/to whom TDS is to be remitted

8 GST registration no

Address of Commercial tax office to whom GST deducted to be remitted

9 EPF registration No

10 ESI registration No

11 LIN registration no.

12 Has the bidder or any constituent partner ever abandoned the awarded work before its completion(If so,give the details)

13 Has the bidder or any constituent partner ever been debarred/blacklisted for tendering in any organisation(If so,give the details)

14 Has the bidder or any constituent partner ever been convicted by the court of law(If so,give the details)

15 Field of Civil Engineering Construction the bidder has specialisation and interest

16 Any other information considered necessary but not included above

Signature of the Bidder (s)

OGSEP, PumpHouse: Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin. TENDER NOTICE NO.: C/1437/2026

NAME OF THE CONTRACTOR

DETAILS OF TECHNICAL & ADMINISTRATIVE PERSONNEL TO BE EMPLOYED FOR THIS WORK

S. No. Designation Total Number Required Number available for this work Remarks

1 Project Manager (Degree in Civil Engineering with 10 years’ experience.) 1

2 PROJECT/SITE ENGINEER (Degree in Civil Engineering with 5 years’ experience or Diploma in Civil Engineering with 10 years’ experience.) 1

3 PLANNING/QUALITY/BILLING ENGINEER (Degree in Civil Engineering with 2 years’ experience or Diploma in Civil Engineering with 5 years’ experience.) 4

4 SAFETY ENGINEER Degree/Diploma/Certification in Safety Engineering from recognized institute or as per AERB Control of Works.) 1

OGSEP, PumpHouse: Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin. TENDER NOTICE NO.: C/1437/2026

DETAILS OF CONSTRUCTION PLANT AND EQUIPMENT LIKELY TO BE USED IN CARRYING OUT THE WORK

NAME OF THE CONTRACTOR

S. No. Name of equipment Nos. Required Nos. Avaliable Capacity or type Age Condition Ownership status Current location Remarks

Presently owned Leased To be purchased Proposed to be hired

1 EXCAVATOR INCLUDING PNEUMATIC BREAKER 1

2 JCB WITH REVERSE HORN AND REAR LIGHT/MIRROR 1

3 TRACTOR TROLLEY 2

4 CONCRETE WEIGH BATCHER 2

5 HAND PNEUMATIC BREAKER 2

6 SHUTTERING MATERIAL 500 sqm

7 TANDEM ROLLER 1

8 PAINT MIXING MACHINE 2

OGSEP, PumpHouse: Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin. TENDER NOTICE NO.: C/1437/2026

NAME OF THE CONTRACTOR

Applicant to write YES/NO against each item, with clarification and document reference as required. Applicant is required to consider complete scope of work and supply, and comply to specifications and as such ‘NO’ is not warranted. However, in case if Applicant’s reply is ‘NO’ for any of the checklist points, bidder shall give reasons for the same.

Applicant is required to submit all information and relevant documents correctly, failing which Applicant’s Bid shall be considered as non-responsive and may be considered liable for rejection. The owner reserves the right not to give an opportunity on a later date to submit incomplete documents/ information after bid submission date. All documents are to be flag marked for easy identification specifically in the hard copy of bid.

SL NO COMPLIANCE STATEMENT/QUERY APPLICANT'S CONFIRMATION/ ANSWER (YES/NO), WITH CLARIFICATION AS REQUIRED PAGE NO. OF THE DOCUMENT(S) (IN HARD COPY)

1. Tender document cost, if applicable in line with NIT provisions of NIT document, submitted. Provide details with copy. Not Applicable Not Applicable

2. Processing Fee of required value and in requisite form as per NIT provisions of document submitted. Provide details with copy. Not Applicable Not Applicable

3. Submission of EMD in line with provisions of NIT Document. Provide details.

4. Have you been banned or delisted by any Government or Quasi Government Agencies or Public Sector Undertakings (PSUs)? If so, provide details with present status.

5. Are you currently in the Holiday list of NFC or CPWD or PWD etc. due to any reason? If so, the reason for the same to be provided.

6. Power of attorney (POA) on non-judicial stamp paper of appropriate value /Letter of authorization in case of proprietorship organization in favour of signatory (ies) of the Bid submitted. Provide copy of same duly authenticated by Gazetted Officer/ Notary.

7. Applicant to confirm that all pages of their offer has been signed by their authorized signatory (ies) who is holding Power of Attorney (POA).

8. As specified in the NIT Document, Bid is valid up to …….(Write Date in Col. 3) (Considering 210 Days from the due date/ extended due date of opening of Bid

9. Have you submitted Copies of Work Order including all subsequent amendments and change orders, Detailed Letter of Acceptance & Agreement etc. as applicable against all the jobs considered to meet the NIT qualification criteria indicated by you in Form-C, as per order (Sl. No.) mentioned therein duly self attested as stipulated in the tender? Provide reference in Column 3. S.NO. Details of Work order/Amendment/Change order/DLOA,ETC

10. Applicant to submit Work completion certificates for all the jobs considered to meet the NIT qualification criteria indicated by you in Form-C, duly self attested as stipulated in the NIT document.

11. Applicant to submit Complete work order including schedule of quantities (SOQ) of all jobs considered to meet the Pre qualification criteria as mentioned in Form-C, highlighting the components of Similar Work as mentioned under NIT, in case it is a composite nature of work.

12. Applicant to indicate Value of component of Similar Work separately for all jobs considered to meet the Pre qualification criteria mentioned in Form-C meeting the experience criteria as defined in the NIT ( in Column No.3). Applicant to submit Client’s certificate indicating value of similar nature of work , in case the job is of composite in nature and value cannot be worked out from Work Order/SOR etc. Sl.NO. Value of Similar Work/Similar work component in Lakhs

13. Applicant to submit Performance reports of all jobs considered to meet the NIT qualification criteria as per Experience Criteria as indicated in NIT document, strictly as per format FORM-E.

14. Applicant to submit complete financial statement including profit & loss account, all schedules and auditor’s report for the last five financial years as mentioned in NIT.

15 In case the Work of the qualifying job(s) submitted have been executed as a Sub-Contractor to main contractor, Applicant to confirm submission of the following documents in addition to what is stated at Sl. No. 10 to 14 above, as applicable above for main contractor for all qualifying jobs duly self attested.

i. If the contractor executed composite work that includes qualifying similar nature work

ii. Copy of Work Order along with SOQ

iii. Copy of Completion Certificates, final bill copies from the End User/ Owner indicating detailed scope with the separation of various components and their values of Work executed by the Applicant.

iv. Performance report from End-User/Owner strictly as per the format i.e., FORM-E enclosed with this NIT document..

v. Completion certificate qualifying scope of work.

16 Applicant to submit Appendix-V to NIT titled “Technical and Administrative Personnel” duly signed & stamped with company seal

17 Applicant to submit Appendix-VI to NIT titled “Plant, Equipment & Machinery” duly signed & stamped with company seal.

18 Applicant to submit Solvency Certificate duly filled in FORM-B titled “Form of Banker’s Certificate from a Scheduled Bank and same , should be on the letter head of the issuing bank” as per the enclosed format in the NIT Document duly Signed & Stamped with seal by the concerned scheduled Bank

19 Applicant to submit duly filled in FORM-A titled “Financial Information” strictly in the format available in the NIT Document duly certified by Chartered Accountant and signed by the Applicant, also indicating Financial Arrangements for carrying out the proposed work as asked in Sl. No. II of FORM-A

20 Applicant to upload duly filled in Form-C (Details of all similar works completed in all respects during last seven years as on the bid submission date) indicating all the information strictly in the format as enclosed in the NIT Document.

21 Applicant to upload duly filled in Form-D (Details of all works of any nature under execution or Awarded) indicating all the information strictly in the format as enclosed in the NIT Document.

22 Applicant to upload duly filled in Form-A (Construction/Works Contract Turnover for last five financial years) indicating Turnover and Profit/Loss details of last Five financial years strictly in the format as enclosed in the NIT Document..

23 Applicant to upload duly filled in Form-H (Details of Construction Plant and Equipment likely to be used in carrying out the work) indicating all the information as asked.

24 Applicant to upload duly filled in Form-G (Details of Technical and Administrative personnel to be employed for the work) indicating all the information as asked.

25 Applicant to upload duly filled in Form-F (Structure & Organisation) indicating all the information as asked.

26 Applicant to confirm acceptance of time schedule for completion of the Work as stipulated in NIT document.

27 Applicant to submit copy of Permanent Account Number (PAN), GST certificate, Employees Insurance and provident fund registration certificate duly self attested.

28 Applicant to submit declaration by bidder, letter for submission of bid and other documents as per NIT

29 Applicant to submit Hard Copy of Checklist

Signature of the Bidder (s)

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Chief Engineer & DCE (CED, PD & EP)

Name of Work: OGSEP, PumpHouse: Civil and allied works for construction of RCC Over Ground Solar Evaporation Pond, Pump House, RCC Tanks and other misc. works at Zirconium Complex, Pazhayakayal, Tuticorin.

Contract No: C/1437/2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures ( inclusive of 18% GST, ESI, EPF & Bonus,etc..) To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

0 General Notes :- 1) Bidder shall provide hard barricading as per given specification without any extra cost if required as per instructions of EIC. Providing & erecting high temporary barricading at site made of min 40X40X6mm angle iron or 50X50X3mm hollow MS tube posts/ horizontal members/bracings covered with 1.63 mm thick MS sheet. The sheet shall be fixed with 30x5 mm MS flat by suitable welding/riveting. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawings /directions of EIC which includes writing & painting, glow lamps, reflective signs as directed by EIC. The barricading provided shall be retained in position at site continuously including shifting of barricading as many times as required during the execution of the entire work. The barricading provided shall remain to be the property of the contractor on the completion of work. 2.) All safety & security regulations shall be followed strictly as per specifications & conditions of contract. 3.) The contractor shall provide sleeveless Jackets to the workers in required pattern, colour showing name of contractor with address and telephone number as approved by the Engineer in charge. All the workers must wear the same while on duty. 4.) Contractor has to make his own arrangements for regulating the work by providing sign boards for Diversion, Men at Work. Danger, Work in progress, Diversions/ Change of Directions etc. at his own cost during exectutuion of work as directed by the Department. 5) Removal of vegetation, grass shall be part of the earthwork and no extra payment will be made for the same. 6) Rolling of earthwork shall be carried out using 8 tone vibratory roller at no extra cost. 7) In structural steel work, bolts and welding will not be measured for the payment and shall be included in the quoted rate. Only, the weight of steel sections used as per relavant IS codes shall be considered for payment. Wastage will not be measured. 8) Proctor Density Test and Field Dry Density Test shall be carried out for subbase/grade slab/flooring and road works for subgrade and GSB at no extra cost. Contractor shall ensure the Field Dry Density is as per the requirements of relavant IS/IRC/Morth Specifications. 9) Preparation of Sub-grade including providing required camber/slope for road/floor works shall be done at no extra cost. 10) Leak test including filling of water and empty the tank after test shall be carried out for the tank as per IS 3370 for requirements of watertightness, corrective action to ensure watertightness of the structure if any shall be done as per directions of EIC at no extra cost. 11) Bidder has to be install temporary hard barricading for height works or works at tank slab with handrail/guard rail made out of reinf bars/standard steel sections during execution of work to ensure safety at site as per direction of EIC at no extra cost. 12) All the items are inclusive of single/double scaffolding for all depths and heights upto 25 meters and no extra cost will be paid for the same. 13) Cutting of chases in walls/floor and making good the same including providing GI chicken mesh for electrical conduits / switchboards/fittings/ utility lines etc. shall be done by contractor whwerever required at no extra cost as directed by EIC. 14) All items are inclusive of working under and in foul positions, muddy area etc., including pumping of water and no extra cost shall be paid for the same. 15) Waterproofing works shall be carried out by specialised agency having similar work experience and shall be gotten approved by EIC. 16) Contractor shall provide two nos of Construction Distribution board along with incoming power cable upto length of 200meters as per NFC specifications for obtaining the temporary power supply for construction works. 17) Contractor shall fill the requisition form for providing temporary power supply and details of any equipment to be used at site (dewatering pump, cutting machine, drilling machines, etc. shall be indicated in the proforma annexed to requisition form. 18) Contractor shall employ a licensed electrician to carryout electrical connections /terminations, measurement of earth pit resistance, insulation resistance of their installation and intimating the same to the department & also earthing shall be ensured throught existance of power supply. 19) Intimation shall be given after completion of work for disconnection of supply and safe isolation of DB with last energy meter reading.

1.01 Earthwork excavation for over Areas, foundations, trenches, drains etc. upto required depths in all kinds of Soils except Soft and Hard Rock in both dry and wet conditions, dewatering if necessary, dressing the bottom and sides to required levels, profiles, slopes, etc., disposing the surplus earth/spoils within a lead of 50m , levelling the areas including clearing of all areas of all grass, rank vegetation, shrubs, bushes, trees upto 300mm girth measured 1.00 metre above ground level etc., complete all as directed and specified.

1.011 a) Upto 1.50 m depth from average ground level. 5500 Cum Full Conversion INR

1.012 b) Above 1.50 m to 3.00 m depth from average ground level. 4500 Cum Full Conversion INR

1.013 c) Above 3.00 m to 4.50 m depth from average ground level. 500 Cum Full Conversion INR

1.02 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means for over areas, foundations, trenches, drains etc. in ordinary rock/granular sub base (GSB)/water mix macadam(WMM)/water bound macadam(WBM) upto the depths specified below including dewatering if necessary, dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a distance of 50 m etc.,including clearing of all areas of all grass, rank vegetation, shrubs, bushes, trees upto 300mm girth measured 1.00 metre above ground level etc complete as directed by Engineer-incharge.

1.021 a) Upto 1.50 m depth from average ground level. 550 Cum Full Conversion INR

1.022 b) Above 1.50 m to 3.00 m depth from average ground level. 450 Cum Full Conversion INR

1.023 c) Above 3.00 m to 4.50 m depth from average ground level. 50 Cum Full Conversion INR

1.03 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means for over areas, foundations, trenches, drains etc. in hard rock (blasting prohibited) by chiseling, wedging or any other approved method viz. using plasma cutting with diesel plasma gun under 3.5Kg/Sqcm pressure, including air compressor, followed by pneumatic chieselling or using non explosive expansive chemical agents , including drilling of holes as specified by manufacture, filling of expansive chemical, followed by pneumatic chiseling, diamond wire rope cutting etc. upto the depths specified below, including dewatering if necessary, dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a distance of 50 m etc.,including clearing of all areas of all grass, rank vegetation, shrubs, bushes, trees upto 300mm girth measured 1.00 metre above ground level etc complete as directed by Engineer-incharge.

1.031 a) Upto 1.50 m depth from average ground level. 550 Cum Full Conversion INR

1.032 b) Above 1.50 m to 3.00 m depth from average ground level. 450 Cum Full Conversion INR

1.033 c) Above 3.00 m to 4.50 m depth from average ground level. 50 Cum Full Conversion INR

1.04 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge 2500 Sqm Full Conversion INR

1.05 Supplying and filling of good quality gravel (including royalty) from outside by mechanical transport including ramming, watering, compacting of the earth in layers not exceeding 20 cm in top/bottom/sides of foundation, trenches, road formation, etc. complete for all leads and lifts as available from approved source of query. 150 Cum Full Conversion INR

1.06 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead within ZC for all lifts complete as specified and directed by EIC. 7500 Cum Full Conversion INR

1.07 Lead charges within ZC premises for additional lead over the initial lead by mechanical transport, including loading, unloading, stacking, the disposable soil, rock, debris, other unserviceable materials etc., Note: Measurement of lead charges will be based on truck measurement with a deduction of voids @20% and 50% for soils and rock or debris respectively. 8000 Cum Full Conversion INR

2 CONCRETE (PLAIN AND REINFORCED) :

2.01 Plain Cement Concrete (P.C.C) 1:3:6 by insitu mixing using Weigh Batching or RMC of Grade M-10 using Portland Slag Cement conforming to IS 455 (M/s. ACC,Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd. make) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed. 1000 Cum Full Conversion INR

2.02 Reinforced Cement Concrete by insitu mixing using Weigh Batching or approved RMC of Grade M - 40 up to specified level using Portland Slag Cement conforming to IS 455 (M/s. ACC,Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd. make) with crushed stone sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. FOSROC ,SIKA,BASF,CICO in proportion as per Manufacturer's Specifications, and bipolar concrete penetrating corrosion inhibiting admixture AURAMIX BCI of fosroc or approved equivalent including Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., but excluding Formwork and reinforcement as specified and directed.

2.021 Below FFL 3100 Cum Full Conversion INR

2.022 Above FFL 1710 Cum Full Conversion INR

2.03 Reinforced Cement Concrete by insitu mixing using Weigh Batching or approved RMC of Grade M - 35 up to specified level using Portland Slag Cement conforming to IS 455 (M/s. ACC,Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd. make) with crushed stone sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. FOSROC ,SIKA,BASF,CICO in proportion as per Manufacturer's Specifications, and bipolar concrete penetrating corrosion inhibiting admixture AURAMIX BCI of fosroc or approved equivalent including Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., but excluding Formwork and reinforcement as specified and directed.

2.031 Below FFL 135 Cum Full Conversion INR

2.032 Above FFL 65 Cum Full Conversion INR

2.04 Casting and fixing in position precast reinforced cement concrete covers of required size in RCC M-35 insitu mixing BY WEIGH BATCHER using Portland Slag Cement conforming to IS 455 (M/s. ACC, Ultra Tech, Raasi, Birla, Coramandal, M/s. Andhra Cement Ltd., KCP), crushed stone sand , graded stone aggregate of 10 mm maximum size at and at all depths and heights below and above plinth level including mixing superplastizer (M/s. Fosroc, Demach, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT) in proportion as per manufacturer’s specifications including necessary shuttering, providing and fixing cover blocks of required sizes, consolidation finishing as specified, curing, making casting yard and curing tank, stacking carefully at casting yard and transporting to the site of use placing in position as shown in drawings, aligning, leveling, making good all the damaged surfaces etc., complete as directed for covers for storm water drains/trenches/manholes etc. with and without holes including formwork but excluding reinforcement. 30 Cum Full Conversion INR

3.01 Providing centering and shuttering using good quality densified film-faced Plywood of at least 12mm thick approved make conforming to IS 4990 including strutting, propping, staging made out of steel frames/H-frames/ Mild Steel (MS) Pipes/Cup and Lock System etc., and removal of the same as required including chamfers, splays, keys, wedges, nails, bracings, brackets, tie rods, sleeves, filling tie rod sleeves with non shrink cementitious (Fosroc conbextra GP2) grout and applying One (1) coat of shuttering oil (Cemol/Fosroc make/any other ) on all shuttering surfaces coming in contact with concrete,including PVC/cement cover blocks etc., if required, for insitu Reinforced Concrete and in Plain Cement Concrete works, making pockets in machine foundations etc., complete as specified and directed. NOTE: The Formwork shall be designed and got approved from the Design Section before erection.

3.011 a) Below and Upto Finish Floor Level 7500 Sqm Full Conversion INR

3.012 b) Above Finish Floor Level 9500 Sqm Full Conversion INR

4 REINFORCEMENT & STRUCTURAL STEEL

4.01 Supply, fabrication and erection of Reinforcement bars for Reinforced cement concrete items at all depths and heights below and above plinth level Thermo-Mechanically Treated bars of minimum grade Fe-500D/550D or more conforming to IS 1786 of Tata, Vizag steel, Sail, JSW, JSPL make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., providing cement cover blocks of adequate strength, complete as specified and as per direction of Engineer- in-Charge. Note: The grade of reinforcedment bars shall be gotten approved by EIC before procurement. 595 MT Full Conversion INR

4.02 Providing and fixing in position galvanised chemical anchors of dia 16mm to 24mm and length upto 300mm of minimum 5.8 grade of approved make of Hilti, Fischer, Fosroc of best quality for anchoring supporting structural steel columns/beams or other members including drilling holes of required dia in RCC, cleaning of holes, providing and injecting chemical/injection mortar of make Fischer (FIS EM plus), Fosroc (Lokfix E77) or approved equivalent with hand gun, aligning bolts to position, proper level, washers, Labour, etc., complete as per manufacturer's specifications and as directed. 20 Each Full Conversion INR

4.03 Placing shear connectors of upto 32 mm dia TMT re-bar into the RCC member including drilling necessary holes to required depth using drill machine, cleaning the holes and removing dust, dirt , etc and supplying and anchoring with epoxy based resin grout material of Fosroc Lokfix E77 or equivalent make complete with cost of materials, labour, tools as per specifications and directions of engineer in charge. NOTE: Reinforcement for Shear Connectors shall be measured seperately for payment. 20 Each Full Conversion INR

4.04 Supplying, fabricating, erecting and fixing in position, MS/GI insert plates/ embedded plates/rolled sections such as angles, channels, Tees, flats, etc./pipes (medium quality) conforming to relevant BIS codes of required shape and size, welding anchoring legs not less than 12mm dia TMT bars, placing in position in concrete while casting, including painting with 2 (Two) coats of PU paint of male M/s Fosroc (Dekguard PU)/Pidilite/Asian Paints/Berger/Dulux over 2 (Two) coats of epoxy zinc rich primer of make Fosroc (Nitozinc primer)/Pidilite/Asian Paints/Berger/Dulux wherever required, fixing in line, level and plumb complete as directed. Note: TMT bars will be paid under relavant item. 3000 Kg Full Conversion INR

4.05 Supply, Fabrication and erection of Structural Steel work using rolled steel joists, angles, channels, plates, chequered plates, flats, bars, louvers etc. of strength not less than Grade E 250 IS-2062:2011 or square/rectangular hollow sections conforming to IS 4923/1161 of M/s. Tata, Vizag Steel, JSW, SAIL in built up sections, Trusses (Complete Truss system consisting of Trusses, Purlins, Bracings, Gusset Plates, Base Plates etc.,), framed work, mezzanine, trestles, ladder, gates, grills, hard drawn wire, PEB structure (Bracings, Struts, walkway platforms, staircase etc.), including cutting, transportation of members to site, erecting members using suitable cranes/jigs/pulleys in line , level, plumb etc., providing Bolts and Nuts, mechanical anchors and other accessories wherever required, arc welding with electrodes conforming to IS 814 of make Advani, D&H, Philips, surface preparation by cleaning with wire brush painting with 3 (Three) coats of PU paint of make M/s Fosroc (Dekguard PU)/Pidilite/Asian Paints/Berger/Dulux over 2 (Two) coats of epoxy zinc rich primer of make Fosroc (Nitozinc primer)/Pidilite/Asian Paints/Berger/Dulux, complete as specified and directed Note:1) The bolts used shall conform to A325 ASTM standards to 8.8 designation High tensile bolts conforming to IS: 3757/IS 1367. All the Bolts, Nuts and Washers shall be Cadmium Coated. 2) One additional coat (Third coat) of paint as per specifications shall be applied on Structural Steel after erection and no extra payment will be made for the same. 10000 Kg Full Conversion INR

5 STONE & BRICK MASONRY :

5.01 Random rubble masonry as per IS 1597 with hard stone with Cement mortar 1:6 (1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 6 crushed coarse sand (conforming to IS 2116)) at all depth and height including scaffolding, raking out joints, simultaenous flush poining, curing, complete as specified and directed. 10 Cum Full Conversion INR

5.02 Brick work as per IS 2212 using fly ash bricks conforming to IS 12894 of Class Designation 7.5 and above as specified at height/depth mentioned below with cement mortar 1:6 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 6 crushed coarse Sand (conforming to IS 2116)} including raking out joints, curing, scaffolding etc., complete as specified and directed.

5.021 a) At all depths below FFL 50 Cum Full Conversion INR

5.022 b) Above FFL upto V floor level 65 Cum Full Conversion INR

5.03 Half brick masonry as per IS 2212 using fly ash bricks conforming to IS 12894 of class designation 7.5 or above as specified above FFL upto V floor level in partitions walls in cement mortar 1:4 (1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 4 crushed coarse sand), including scaffolding, raking out joints, curing and with Reinforced Cement Concrete (RCC) M15 (1:2:4) stiffeners of depth 75mm at every 900 mm height including form work, curing etc., complete as specified and directed, but excluding reinforcement. Note: Reinforcement will be measured and paid for separately under relevant item of schedule. 25 Sqm Full Conversion INR

6 PLASTERING AND PAINTING :

6.01 Providing two coats of approved best quality Anti-corrosive Bitumen based paint confirming to IS:9862 over one coat of compatible primer or as per manufacturer's specifications of M/s Shalimar product or approved brand on exterior surfaces of underground concrete surfaces of structures below plinth including preparing the surfaces, filling, cleaning, etc., complete as per manufacturers specifications and as directed for all surfaces of structural members below ground. 7600 Sqm Full Conversion INR

6.02 Providing protecting coatings for the RCC structure as mentioned below:

6.021 Providing and applying a polymer modified cementitious fairing coat on the concrete surfaces upto 3mm thick of make Fosroc Renderoc FC or approved equivalent as to cover the pin holes, minor imperfections in the concrete before protective coat application etc., complete and as directed by the EIC. 8600 Sqm Full Conversion INR

6.022 Supplying and applying 2(Two) coats of aliphatic acrylic breathable elastomeric anticarbonation protective coating for RCC structure viz., DEKGUARD E2000 of make M/s. Fosroc Chemicals India Ltd./ M/s. Sunanda Chemicals/ M/s. Krishna Conchem Products Pvt., Ltd., or any other approved equivalent along with 1(One) coat of primer viz., DEKGUARD PRIMER/ DEKGUARD WB PRIMER or M/s. Sunanda Chemicals having component of penetrating Silane Silaxone. Surfaces containing blow holes or similar areas of pitting should first be filled using RENDEROC FC/CF or approved equivalent. The coating should have Dry Film Thickness (DFT) of minimum 200microns. The coating should have the properties viz., (1)Excellent protection against carbon dioxide ,chloride ions, sulphates, oxygen and water. (2)Highly UV resistant to the effects of long term weathering. (3)Allow water vapour to escape from the structure. (4) Highly durable in all climatic conditions. The coating should be applied on the finished concrete surfaces (Both External & Internal) , at all heights above plinth level along with necessary scaffolding , applying with suitable means as per manufacturer's recommendations and specification etc., complete and as specified and directed. NOTE: The thickness of coating of minimum 200microns DFT should be ensured at every point of time during painting. 8600 Sqm Full Conversion INR

6.03 Cement plastering 20mm thick in Two (2) coats over exterior masonry and concrete surfaces at and at all heights/depths above/below plinth level using ready mixed plaster of make M/s Enduraplast, Walplast, Ultratech or approved equivalent with 12mm thick base coat in Cement Mortar 1:4, 8mm thick finishing coat in Cement Mortar 1:4 , final rendering, making necessary grooves, bands, drip moulds, providing & fixing GI plaster mesh/chicken mesh 150 mm wide along route of walls chipped for service lines, junction between RCC and brick walls and also other places wherever required over brick walls or concrete surface, preparation of surface, hacking of surface, steel/tubular scaffolding curing etc., complete as specified and directed. 800 Sqm Full Conversion INR

6.04 Cement plastering 15 mm thick for internal or external walls/drains using ready made plaster in cement mortar (1cement:4 Sand) of make M/s Enduraplast, Walplast, Ultratech or approved equivalent fininshed smooth at all height above plinth level over brick walls or concrete surface including making necessary grooves in between junctions or brick masonary and RCC , providing & fixing GI plaster mesh/chicken mesh 150 mm wide along route of walls chipped for service lines, junction between RCC and brick walls and also other places wherever required over brick walls or concrete surface, preparation of surface, hacking of surface, steel/tubular scaffolding curing etc., complete as specified and directed. 1300 Sqm Full Conversion INR

6.05 Providing and applying white cement based putty in two coats including one coat of primer with average thickness not less than 1 mm, of Birla make or any other approved manufacturer over the plastered wall surface (external/internal) to prepare the surface even and smooth complete. 300 Sqm Full Conversion INR

6.06 EXTERIOR PAINTING FOR BRICK MASONRY :- Applying of Two or more coat of elastomeric liquid applied water proofing membrane of asain paint damp proof advance or Dulux Aquatech Flexible damp proof base coat as per manufacture specification. Finishing walls with 2 or more coat of 100% Premium acrylic Smooth waterproof exterior finish emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS:15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Dept Tinted) with silicon additives, equal to asain paint ultmia protek or Dulux Professional weathershield Flexx or Paints can be obtained from approved make from M/s. Asian, Dulux, Berger, Johnson & Nicklson, Nerolac, Pidilite or any other make etc., including surface preparation, scrubbing, sand papering, removing of loose paint, plaster, dirt, etc., filling of cracks, holes with crack filler of make fosroc renderoc CS/CF or approved equivalent complete and as directed. 800 Sqm Full Conversion INR

6.07 INTERNAL PAINTING FOR BRICK MASONRY :- Supplying and applying two or more coats of interior luxury emulsion paint with high sheen, stain resistant and antibacterial/antifungal properties including providing one coat of approved suitable interior primer at all heights above plinth level, including cleaning the surface, surface preparation, rubbing with sand paper, scraping of the existing loose paint with putty knife, filling of holes with putty, filling of cracks with fosroc renderoc CF/CS or approved equivalent, complete and as directed. 300 Sqm Full Conversion INR

7 False Ceiling and Flooring :

7.01 Providing and Fixing Light weight Calcium Silicate False Ceiling with Silhouette Grid at all heights of Aerolite make with 15mm thick integral densified micro edge light weight calcium silicate tiles of size 595X595mm of approved design, texture and pattern having 100% RH – HUMIDITY RESISTANCE, non-combustible as per BS 476, Noise Reduction Coefficient of 0.5, Light reflectance above 85%, Thermal Conductivity less than 0.05 W/m K, to be laid in true horizontal level suspended on interlocking metal powder coated T-grid of hot dipped galvanized steel sections of 0.4mm thick Silhouette Profile, rotary stitched double webbed white with 6mm reveal profile comprising of main ‘T’ runners of size 15X42mm of length 3000mm, cross-T of size 15X42mm of length 1200mm and secondary intermediate cross-T of size 15X42mm of length 600mm to form grid module of size 600X600 mm , wall angle of size 22x19x0.4mm to be fixed all around the wall. Main ‘T’ runners to be suspended from the ceiling using GI slotted cleats fixed to ceiling with 50mm long 8 mm outer dia M-6 dash/anchor fasteners, 6mm dia fully threaded GI hanger rod with L-shape level adjuster of size 85X25x2mm or 4mm GI hanger rod with butterfly clip, including scaffolding, at all heights, complete as per specifications and as directed by Engineer-In-charge. Note: Hanger system shall be decided as per site conditions and height of false ceiling as directed by Engineer-in-charge. 10 Sqm Full Conversion INR

7.02 Providing & fixing glazed vitrified tiles/double charge vitrified tiles of polished/matte/anti-skid/rustic finish of size 600mmX600mm/1200mmX600mm/800mmX800mm and thickness as per manufacturer's specifications conforming to IS 15622 for flooring ( thickness as specified by manufacturer) of make Johnson, Somani, Kazaria of required shade, design, colour and pattern laid on 20 mm thick cement mortar 1:4 (1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.): 4 coarse sand) or polymer modified adhesive of make MYK/Roff or approved equivalent including providing joints of 2mm/3mm with spacers filled with epoxy grout mix of desired shade as per manufacturer's specifications of make Pidilite, MYK of required color. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, complete as specified and directed by EIC. 30 Sqm Full Conversion INR

7.03 Providing & fixing glazed vitrified tiles/double charge vitrified tiles of polished/matte/anti-skid/rustic finish of size 600mmX600mm/ 1200mmX600mm/ 800mmX800mm/ 300mmX600mm and thickness as per manufacturer's specifications for dado, skirting, risers of steps (thickness as specified by manufacturer) of make Johnson, Somani, Kazaria of required shade, design, colour and pattern laid using suitable high polymer modified quick-set tile adhesives (Water based) of Roff/MYK or approved equivalent, providing joints of 2mm/3mm with spacers, filling of joints with matching epoxy grout mix of desired shade as per manufacturer's specifications of make MYK, pidilite of required color, as required, complete as specified and directed by EIC. 155 Sqm Full Conversion INR

7.04 Providing and fixing 16 to18 mm thick gang saw cut, mirror polished, premoulded and prepolished/honed/leathered/lappato or in combination machine cut Granite stone for floor/treads/ risers /steps / dado/ ramps/window sills/jambs/wash basin platforms etc. of required size, approved shade, colour and texture laid over minimum 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse crushed stone sand)/ 12 mm thick, 1:3 (1 cement : 3 coarse crushed stone sand) cement mortar/chemical adhesive, joints treated with epoxy grout, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, making cutouts in granite for washbasin/pillar taps/any other fittings etc. complete at all levels including cost of single/double nosing, making 3 no of grooves for saircase treads etc. all complete as specified and as directed. 10 Sqm Full Conversion INR

7.05 Providing and laying machine cut chissel dressed kota/Shahbad stone slab of approved shade in floor, tread, landing, riser, skirting, dado over and including a bed of cement mortar including preparing the base surface, applying neat cement slurry @ 2.75 Kg of cement per Sq.m. of area to receive the mortar, providing neat cement slurry @ 4.4kg. of cement /Sq.m. of area over the mortar bed, jointing each slab with neat cement paste/ grouting white cement and pigment ( conforming to IS : 2114, Table-1, matching the shade of slabs), machine cutting of the slab edges square, true & plumb finishing, grinding, polishing, finishing etc. all complete.

7.051 25mm thick kota/Shahbad stone slab (with tolerance +_2mm for thickness, +_2mm for length/ breadth) in floor tread, landing, riser, skirting, dado over 20mm thick cement mortar 1:4(1 Cement : 4 coarse sand by volume) for floor/tread/landing and 12mm thick cement mortar 1:3(1 Cement : 3 coarse sand by volume) for dado/skirting/risers etc. 65 Sqm Full Conversion INR

7.06 GSB: Construction of Granular sub-base by providing HBG material conforming to Grading-ii of MoRTH Table 400-1 including cost, (excluding seigniorage) charges and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator/approved means at OMC and compacting with vibratory roller of 8 to 10 Tons Capacity/approve means to achieve the desired density etc., complete for finished item of work as per MoRTH Specification 401(5th revision and as directed by Engineer-in- Charge. Note: ( Payment will be made based on levels for finished item of work). 750 Cum Full Conversion INR

7.07 Non Metallic Floor Hardener: Providing over RCC flooring, grade slab when concrete is in green condition, finishing top with hard finishing coat using non –metallic floor hardener of Chhabdur or Hardtop or any other from M/s. Fosroc, STP, MYK, Pidilite, Sunanda Chemicals of approved quality and make at spread rate of 7Kg/Sqm or as specified by manufacturer for heavy duty floor finish including spreading after vacuum dewatering, ramming, consolidation, finishing smooth using power trowel to required levels or slope as specified, curing, etc., complete as specified and directed with vacuum dewatering. Note: Vaccuum dewatering will be carried out only if required and will be paid in relevant item. 5000 Sqm Full Conversion INR

7.08 Vacuum Dewatering & Power Trowelling: Vacuum dewatering of concrete using vacuum dewater technique for evaporation by way of removing the excess water using rigid or flexible suction mat incorporation filler layers and vacuum filler layers and vacuum generator (80 to 90% vacuum is to be applied at the rate of 3 to 5 minutes per 25 mm of depth), finishing with power trowel to get smooth finish all as per specifications, drawings and directions of the Engineer-in-charge for grade slab. 5000 Sqm Full Conversion INR

7.09 Joints Groove Cutting and Sealing: Cutting using Diamond saw or any other suitable equipment grooves of size 6mmx12mm in flooring at construction/contraction joints or as directed by design Engineer, including filling with polysulfide sealant of M/s. Foroc, STP, Pidilite, MYK, cleaning the joints using compressed air, drying the joint before application complete as directed. 2350 RM Full Conversion INR

7.1 Providing & applying screed concrete of M-25 grade with maximun coarse aggregate size of 10 mm or less using Weigh Batching or RMC using Portland Slag Cement conforming to IS 455 (M/s. ACC,Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd. make) with crushed stone sand and graded stone aggregates of 10mm maximum size at all depths/heights below/above plinth level including power troweling, consolidation, finishing smooth/broom finish as applicable, curing, adding water proofing chemical of FOSROC/PIDILITE/SUNANDA as per manufacturer's specifications, etc., but excluding Formwork, complete as specified and directed. 10 Cum Full Conversion INR

7.11 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge 200 Sqm Full Conversion INR

7.12 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete including two coats of approved primer and two coats of ready mix paint as per IS 164 etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 10 Cum Full Conversion INR

8 DOORS, WINDOWS, PARTITION & PANELLING ETC :

8.01 Providing and fixing factory made single extruded WPC (Wood polymer Composite) solid door/window/ceosetory windows & other FRAMES / CHOWKHAT of following sizes comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum , screw withdrawal strength of 2200N (Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with M.S hold fast / lugs / SS dash fastners of required dia and length including two coats of wood primer and two coats of wood enamel paint or PVC laminate sheet/PVC foil as per manufacturer's specifications, complete as per direction of Engineer in Charge. Note : For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

8.011 Frame size 50mmX100mm 16 RM Full Conversion INR

8.012 Frame size 65mmX100mm 15 RM Full Conversion INR

8.02 Providing and fixing factory made single extruded 30mm thick WPC ( Wood polymer Composite ) solid with both side PVC laminated/Marble PVC Sheets flush door shutter of required size comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum frame density of 650kg/cum , screw withdrawal strength of 1800N (Face ) & 900 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent, include providing and fixing necessary stainless steel door fittings of make Kich/Godrej or approved equivalent viz. stainless steel butt hinges (with or without ball bearings) of required size (3 nos of size 5 inches and 3mm thickness) with neccessary full body threaded star headed counter sunk S.S Screws, Stainless steel aldrops/latches/baby latches, SS tower bolts, SS door stopper, SS door pull handles ('C' or 'H' shaped) if and wherever required for each door complete as directed as per direction of engineer in Charge. 12 Sqm Full Conversion INR

8.03 Providing & fixing set of stainless steel of grade SS316 mortice door Handles for wooden doors of dia 22 mm, including set of escutcheons of make Kich (MH223FS), necessary screws etc, complete as specified and directed . 3 Each Full Conversion INR

8.04 Providing and fixing 9 inches mortise door lock of size 60mmX85mm with SS finish without mortice handles for wooden doors with main plate and strike plate of make Kich(MLB94S) or approved equivalent and mortice pin cylinder with one side knob/slot/key and other side knob/slot/key of make Kich (PCSNS60) or approved equivalent, or latch lock/rim lock with cover plate for double door including necessary screws etc., complete as specified and directed. 3 Each Full Conversion INR

8.05 Providing and fixing stainless steel over head door closer of Kich (DC512SS) make or approved equivalent for wooden doors weighing upto 90kg with necessary accessories, fixtures, fittings, scews etc, complete as specified and directed. 3 Each Full Conversion INR

8.06 Providing and fixing factory made uPVC white colour sliding/fixed/casement glazed windows/ventilators of make Greentech/Salamander or approved equivalent extrusions comprising of uPVC multi-chambered frame sliding window consisting of two and half track three panels with two glazed and one wire mesh panels made of frame 85 mm and above X 40 mm and above & sash 30 mm and above x 55 mm and above & fly screen sash 20mm and above X 50 mm and above having wall thickness of 2.0 ± 0.2 mm, duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), including providing and fixing glazing made of 6mm thick toughened glass of make Saint Gobain/ Modiguard , SS304 wire mesh, uPVC extruded glazing beads of appropriate dimension, EPDM gasket, aluminium channel for roller track, nylon rollers, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws and other necessary hardware etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's viz. rollers, striker, locks of DNV make or approved equivalent and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: Size of UPVC fixed/casement windows/ventilators/louvers shall be as per manufacturer's specifications and as directed by EIC. 25 Sqm Full Conversion INR

8.07 Supplying and fixing in position approved motor automatic operated (push & pull) steel rolling shutters made from M.S. lathes of not less than 1.25 mm thick including supplying and fixing all necessary fixtures, fittings, top hood, guide channels, shutter suspension shaft not less than 6", ceiling strips providing approved quality of ball bearings, locking arrangements, handles, lugs, cutting, drilling necessary holes in concrete, grouting lugs with cement concrete 1:2:4, including providing and fixing not less than 1.0HP motor of Crompton Greaves, Kirloskar, L&T, Jielong along with other accessories for On and Off, level switch ). connected operatable, applying one shop coat of approved Zinc chromate primer and two coats of synthetic enamel paint complete as shown in the drawing and as directed (measurement for rolling shutters will be as per the structural openings, hoods shall not be measured separately). 10 Sqm Full Conversion INR

8.08 Providing and fixing in position epoxy powder coated (minimum thickness of power coating 50 microns)Aluminium partition /Grills/ door/ windows/ ventilators/ louvers with single/double side hung/tophung/sliding shutters etc. using extruded built up standard tubular and other sections of approved make (Jindal Delux Series (Domal)/Hindalco/Indal sections or its approved equivalent sections) and confirming to IS 733 and IS 1285 of required available colour, manufactured to relevant IS Standard Specifications including applying Epoxy coating of required thickness, fixing with rawl plugs and screws or fixing with clips or with expansion hold fastners, including locks/locking arrangement for doors/windows, handles, mortice locks, aldrops, tower bolts, door stopper, magnetic catcher, hinges, friction hinges, aluminium push plates, sliding rollers, aluminium hardware fixtures, cleat angles, beadings etc as per the requirement, gaps of structural opening to aluminium frame work to be filled with siliconate / polysulphide sealant, fixed suitably to brick wall/RCC structures complete as directed. NOTE: Aluminium sections such as shutter frames, window / door frame, beading channel for glass/adjustable louvers/mosquito mesh, door handles, louvers etc., shall only be measured linearly as per actual / finished cutting size and multiplied with sectional weight of the individual section and the total quantity of aluminium section will be arrived at for payment without any allowance for wastage. No separate payment shall be made for fittings such as locks/locking arrangement, hinges, friction hinges, rollers, door stoppers, magnetic catchers, fittings and fixtures, gasket, cleat angles etc. 240 Kg Full Conversion INR

8.09 Providing and fixing Pre-laminated cement bonded particle board of thickness 12 mm of M/s Bison or approved equivalent conforming to IS:15786 with decorative lamination on both sides including cutting, fixing in aluminum doors, windows shutters and partition frames with CP brass or stainless steel screws etc. complete, as directed by EIC. 25 Sqm Full Conversion INR

8.1 Providing and fixing glazing with 5 mm thick plain toughened glass of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) for windows, louvers etc., including EPDM gasket wherever required, all complete as directed by Engineer-in-charge. 20 Sqm Full Conversion INR

9 WATERPROOFING & PEG LINING :

9.01 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. NOTE :- 1)The treatment shall be tested by ponding water for a period of 10 days. If due to location of rain water pipes the average thickness of treatment exceeds 110 mm for easy flow of water the extra brickbat coba will be paid as extra item and the rate for the same to be got approved from the Department before execution 2) The waterproofing treatment is to be guaranteed for bone-dry condition for a period of 10 years in the prescribed proforma. 3) The measurement for payment shall be the entire area of terrace covered by the treatment measured between brick/concrete parapets without plaster and the area of vatas calculated by taking the length of vatas and the height above the finished level of the terrace. 160 Sqm Full Conversion INR

9.02 Providing and applying Water pproofing treatment for bathrooms, water closets etc. using ultra flexible polymer modified elastomeric waterproof coating, brick bats and cement based waterproofing in followng steps:

9.021 Providing and applying Ultra flexible polymer modified elastomeric waterproof coating for bathrooms using Brushbond Ultraflex of Fosroc Chemicals or approved equivalent in following steps: Surface preparation: RCC surface shall be made dry, clean, even and checked for soundness. Oil, dirt, laitance and other contaminants shall be removed manually. Surface shall be fairly smooth finished using polymer modified mortar. Chamfering of the floor wall junctions shall be done with cement mortar 1:4 admixed with Nitobond SBR @ 2 litres per 50 kg bag of cement. Inlet Outlet Pipe Annular space packing shall be done using Conbextra GP2 of Fosroc Chemicals mixed water in ratio 0.16. Pond testing shall be done for 48 hours, 50mm height and leaking spots, construction joints and honey combs shall be provided with Injection grouting using cementitious pressure grouting method with 40 psi pump using Cebex 100 of Fosroc Chemicals @ 225gms mixed to 50 kg bag of cement including joints packing using polymer modified mortar complete as per manufacturer's specification or as directed by EIC. Waterproof Coating: Apply Ultra flexible polymer modified elastomeric waterproof coating of 1mm thickness in 2 coats at a coverage rate of 16 sqm per 25 kg bag with interval period of 6 hours over a substrate with Saturated Surface Dry condition. Termination to be done on wall extending the coating to min.300mm height above the finished floor level and sealed in the termination groove of 20mm wide and 10mm deep flushed with polymer modified mortar as per manufacturer's recommendation or as directed by EIC Supplying and sprinkling of Fine sand while the polymer modified elastomeric waterproof coating is in tacky condition. Providing and laying plastering of 18mm thickness for floors and 12mm thickness for walls in CM 1:4 mixed with integral waterproofing compound Conplast WL Xtra @ 200ml per bag of cement. System include necessary preparation, curing with water, chemicals used, labour, etc as per specification complete before providing screed concrete / brick bat coba / cinder filling. 40 Sqm Full Conversion INR

9.022 Providing water proof brick bat coba with cement mortar 1:5 admixed with water proofing chemical of Fosroc/Pidilite or approved make for filling in the depressed portions of toilets, bath rooms etc., as per the specifications of specialized waterproofing agencies and finishing the top surface with 1:4 cement mortar mixed with water proofing chemical so as to be suitable to receive the tiles etc. testing the treatment for water tightness by impounding water for 7 days etc., complete. 5 Cum Full Conversion INR

9.023 Providing cement based waterproofing treatment to the sunken floor of water closets, bath rooms, nahanis from inside at all heights above plinth level giving injections to the concrete surface as required with cement and approved waterproofing compound of Fosroc(Conplast WL Xtra @ 200ml per bag of cement)/Pidilite or approved equivalent to fill up all inherent holes, voids, honey-combs, etc., in the concrete, applying waterproof plaster of about 25 mm thick for the floor area of the depression and about 18 mm on the side walls of the depression and continue the vertical treatment if necessary on the walls above proposed floor finish. 40 Sqm Full Conversion INR

9.03 Providing, supplying and brush applying solvent free food grade epoxy resin system of Fosroc Nitocote EP 405/Pidilite or approved make to water tanks in two coats with a gap of 8 hours between coats including thorough surface preparation with compressed air blowing and mechanical removal of debris, laitance, etc. all complete as per manufactuer's specifications and direction of Engineer-in-charge 620 Sqm Full Conversion INR

9.04 Supply and fixing of 25mm thick cross linked, non absorbent, semi rigid, cellular polyethylene board of make Fosroc Hydrocell XL or approved equivalent which shall be with a nominal density of 90 to 110 Kg/cum. It shall have a recovery of 98% after 50% compression and a compressive strength of 0.15 N/mm² when tested in accordance with ASTM D3575. It shall have water absorption of less than 0.05% by volume when tested in accordance with ASTM D3575 and be resistant to weathering and chemical attack. Chemical resistance of Hydrocell XL an Excellent resistance to acids, alkalis, oxidising agents and biological degradation The joint filler shall have Water Byelaws Scheme approval for use in contact with potable water, including cutting the board to require size, placing the board in position etc, complete as directed by EIC. 30 Sqm Full Conversion INR

9.05 Providing and applying all expansion and non movement joints in concrete with cold applied, high performance, hydro carbon resistant, two part Pitch free Polyurethane sealant of make Fosroc Colpor 200 PF over backer rod using Expancel or approved equivalent and application of Primer 20 on the sides of the groove joints of average size 25mm x 12mm. The application shall be carried out by the authorized applicator of the manufacturer and application cost includes the cost of products, backer rods, tapes, necessary application tools & equipment, labour charges etc, complete as per specification and direction of Engineer - In - Charge. 190 RM Full Conversion INR

9.06 Providing and laying integral cement based treatment for water proofing (BOX TYPE WATERPROOFING) on horizontal surface at all depth below ground level for under ground structures using rough shabahd stone as directed by Engineer-in-Charge and consisting of : (i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course/PCC (PCC is paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. Cement slurry @2.2kg/m2 admixed with water proofing compound in recommended proportions to be applied twice at base and top of mortar. (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer. 305 Sqm Full Conversion INR

9.07 Providing and laying integral cement based treatment for water proofing (BOX TYPE WATERPROOFING) on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : 315 Sqm Full Conversion INR

9.08 Providing and Placing in position suitable PVC water stops , Serrated with central bulb (225 mm wide, 8-11 mm thick), conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete as specified and directed 705 RM Full Conversion INR

9.09 Supply and application of Polyethelene Glass (PEG) lining system with Base Layer of Fiber Reinforced Plastic (FRP) Lining using Vinyl Ester Resin for Solar Evaporation ponds consisting of following: 1. Surface Preparation: Mechanical cleaning of concrete surface by cup brush/wire brush and chemical wash to remove all foreign matter, ensuring surface free from oil, grease, loose particles. Preparation of Concrete surface as per CSP-2 standard of International Concrete Repair Institute (ICRI) suitable for new lining. 2. Primer Application: Application of suitable unsaturated resin-based primer over prepared surface. 3. Base Lamination: Application of single-layer lamination with 2 mm thk. Fibre reinforced plastic ( FiberGlass 450 GSM ) lining with Vinyl Ester resin for additional strength and protection. 4. Sheet Fixing: Bonding of UV stabilized high density polyethylene glass lining (PEG) (Fiber Glass 300 GSM) sheets using Vinyl Ester Resin adhesive along with Poly Ethylene Powder Glass Fiber ( Fiber Glass 300 GSM ) and other additives for ensuring uniform adhesion to FRP, removal of entrapped air in the base Lamination. Sheet Thickness should be minimum 3mm and Bonding Material must be minimum1.5mm. 5. Joint Sealing: Copper wire of dia 0.5mm is to be provided all along the two sheets joints and covered with one inch wide PEG strip. The strip shall be welded to the base PEG sheet by strip-lay fusion and rod welding technique to achieve complete fusion. 6. Providing additional joint sealing: To protect the Welding from any mechanical damage. All the joints should be covered with 5MM Thick and 50MM Width Screeding using Vinyl Ester Resin and HDPE / PP Balls to have a bonding with Lining material. 7. Spark Testing: Conducting Dielectric Integrity Test (Spark test) on the entire surface to ensure pinhole-free lining. 8. Surface Cleaning: Final cleaning of lined surface and removal of all waste materials from site. Note: The contractor shall carry out this lining work through a specialised agency as mentioned in NIT who has experience of carrying out similar lining works. 4750 Sqm Full Conversion INR

10 MISCELLANEOUS ITEMS :

10.01 Supplying and fixing pultruded FRP hand rail of required color of one meter height made of UV grade polyester with ECR grade boron free glass fibre consisting of vertical post of minimum size 50mmX50mmX5mm thk at 1.2 meter center to center distance, top rail of minimum size 65mmX45mmX4mm thk, mid rail, bottom plate and nylon base shoe of make M/s Fibre Tech Composite Pvt Ltd or approved equivalent, fixing using SS316 fastners with appropriate nuts and washers, including all accessories, complete as specified and directed by EIC. Note: Only the length of top rail will be measured for payment. 975 RM Full Conversion INR

10.02 Supplying and fixing 160mm dia GRADE A uPVC UV-Stabilised soil / waste/rain water pipes (conforming to IS 13592) and fittings (conforming to IS 14735) laid in floor & on exposed faces of wall of Ashirvad/Supreme make, including scaffolding, removal of existing pipelines if any, laying the pipe below floor / ground to proper slope and gradient, jointing the pipe with Solvent Cement/Rubber ring gasket, ensuring water-tightness for the pipes laid as per codal provisions, cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors, cowls, etc, complete as specified and directed. 20 RM Full Conversion INR

10.03 Supplying, lowering, laying, RCC SPUN PIPES of class and internal dia mentioned below conforming to IS:458 with necessary collars, laid to correct grade and levels at and at all depths below plinth level including cutting to lengths, jointing with hemp yarn and cement mortar 1:1, caulking the joints and finishing, curing, etc., complete as specified and directed.

10.031 150mm NB NP-2 10 RM Full Conversion INR

10.032 300mm NB NP-2 10 RM Full Conversion INR

10.033 600mm NB NP-3 10 RM Full Conversion INR

10.04 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) complete as per design. 40 Nos Full Conversion INR

10.041 Supplying and fixing GI Chain link fencing of required height with 50mm diamond mesh of approved quality and make with 4 mm galvanized iron wires conforming to IS 2721, coated with PVC to achieve outer dia not less than 5mm in required color, shade, including unrolling, straightening, stretching, fixing tight to structural steel posts and struts erected in position by means of 6mm dia approved quality galvanized iron machine straightened rods at top and bottom horizontally throughout fence and vertically at every angle post, fixed with approved quality galvanized iron hooks, bolts, nuts and washers etc., complete as specified and directed 180 Sqm Full Conversion INR

10.042 Providing and fixing barbed wire of approved quality of garvanised barbed wires of 2 strands of 12 guage and 4 barbs of 14guage at 75mm centre to centre including unrolling,stretching and fixing tight with 6mm dia approved GI hooks, bolts,nuts, wadhers etc complete as directed 300 RM Full Conversion INR

10.043 Providing grouting (including tamping) for foundations, structures, equipments, base plates, anchor holes, etc., with non-shrink, free flow grout of Fosroc Cobextra GP-2 or equivalent mixed with well graded aggregate as per manufacturer's specifications, including shuttering wherever necessary at and at all depths and heights below and above plinth level complete as specified and directed. Note: Only the weight of grout used shall be measured for payment. Aggregate shall be provided in the grout mix at no extra cost and will not be measured for payment. 3200 Kgs Full Conversion INR

10.05 Providing and fixing Heavy duty FRP manhole cover with frame of size 600mmX600mm with load bearing capacity of 40T of make fibrotech (MHC600-40T) or approved equivalent, placing and fixing over the RCC slab/Pavement, including fixing mortar etc. complete as directed by Engineer-in-charge 4 Nos Full Conversion INR

11 WATER SUPPLY

11.01 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11) conforming to IS 15778 of Ashirvad/Supreme or approved make, having thermal stability for hot & cold water supply, including all CPVC brass threaded fittings, specials for fixing the pipe with existing GI/CPVC pipe i/c fixing the pipe on exposed/recessed/underground surfaces to correct line, level, plumb using clamps as directed. This includes removing of existing pipes and fixtures if required, jointing of pipes & fittings with one step CPVC solvent cement, teflon tape, cost of cutting chases wherever required and making good the same with cement concrete/mortar, cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition including testing of joints at cerain locations complete as specified and directed concealed/exposed including cutting chases and making good the walls.

11.011 a) For the following Nominal Bore (NB) pipe: 20 mm 40 RM Full Conversion INR

11.012 b) For the following Nominal Bore (NB) pipe: 25 mm 40 RM Full Conversion INR

11.013 c) For the following Nominal Bore (NB) pipe: 32 mm 20 RM Full Conversion INR

11.014 d) For the following Nominal Bore (NB) pipe: 40 mm 20 RM Full Conversion INR

11.015 e) For the following Nominal Bore (NB) pipe: 50 mm 20 RM Full Conversion INR

11.02 Providing and fixing in position heavy pattern screwed end Gun metal ball valve/Gate Valve with ball SS confirming to IS.778 with hand lever or CI wheel at top including testing for 10 kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc. as per specification.

11.021 25 mm n.b. 3 Each Full Conversion INR

11.022 32 mm n.b. 2 Each Full Conversion INR

11.023 40 mm n.b. 1 Each Full Conversion INR

11.024 50 mm n.b. 1 Each Full Conversion INR

11.03 Providing hoisting and installing at required elevation double layered moulded HDPE cylindrical vertical water storage tank/tanks of required capacity of Sintex or Duracon make, with suitable SMC cover at top, coated with UV coating/layer including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow and the required fittings/ gaskets, float valve including making necessary supporting system complete as directed. 10000 Liter Full Conversion INR

12.01 Providing & laying structured wall UPVC under ground drainage pipes & fittings (SN-8) of Ashirvad/Supreme make for sewer lines of following size conforming to IS:16098 (Part-1) to proper level & grade, jointing including providing coupler with cement solvent / welded joints / as per manufacturer's requirement, UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc, connecting with existing manholes, including making holes in manholes and grouting with GP2 grout after fixing of pipe, complete as specified and directed

12.011 a) 110 mm DN (SN 8kN/m²-SDR34) 50 RM Full Conversion INR

12.012 b) 160 mm DN (SN 8kN/m²-SDR34) 50 RM Full Conversion INR

12.02 Supplying and fixing following size GRADE B uPVC UV-Stabilised soil / waste/rain water pipes (conforming to IS 13592) and fittings (conforming to IS 14735) laid in floor & on exposed faces of wall of Ashirvad/Supreme make, including scaffolding, removal of existing pipelines if any, laying the pipe below floor / ground to proper slope and gradient, jointing the pipe with Solvent Cement/Rubber ring gasket, ensuring water-tightness for the pipes laid as per codal provisions, cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors, cowls, etc, complete as specified and directed.

12.021 a) 75 mm n.b. pipes 40 RM Full Conversion INR

12.022 b) 110 mm n.b. pipes 40 RM Full Conversion INR

12.03 Construction of rectangular CHAMBERS of internal clear dimension of mentioned below ( internal clear) in 230 mm thick brick masonry in cement mortar 1:6 over a bed of 150 mm thick 1:3:6 cement concrete in foundation, plastering with cement mortar 1:4, 20 mm thick on inside, and all outside exposed surfaces finished with a floating coat of neat cement, 1:2:4 cement concrete for benching in slope 1 in 30 and channel finished with neat cement, brick corbelling at top if necessary to provide clear opening and providing and fixing CI cover with frame of light duty single seal pattern weight not less than 33 kgs embedded in cement concrete 1:2:4, providing and fixing PVC encaptualted MS rungs of 20mm square, each at 300 mm centre to centre if depth exceeds 800 mm, painting CI cover and frame with two coats of bitumastic paint etc. complete-For depth of chamber not exceeding 900 mm. However minimum depth of chamber not less than 450mm

12.031 a) 450x600mm 5 Each Full Conversion INR

12.032 b) 600x900mm 5 Each Full Conversion INR

12.04 Extra over above item for depths beyond 900 mm of Rectangular chamber including providing and fixing PVC encaptulate MS rungs 200 square, each @ 300 mm C/C, staggered vertically and horizontally etc., as per specifications.

12.041 a) 450x600mm 2 RM Full Conversion INR

12.042 b) 600x900mm 2 RM Full Conversion INR

12.05 Providing and fixing in position UPVC bottle Gully Trap of Supreme /Ashirvad make of 160 X 110mm sizes including embedding the trap in 1:2:4 cement concrete, construction of brick masonry chamber in 230 mm thick brick masonry in cement mortar 1:4 over cement concrete bed of 1:3:6 of 100 mm thick, embedding the trap, plastering with cement mortar 1:4, 12 mm thick on inside & outside and all exposed surfaces, finished with a floating coat of neat cement, providing and fixing heavy duty C. I. frame and cover of size 300mmX300mm, 40mm thick cement concrete 1:2:4 bed over brickwork, painting the grating frame and cover with 2 coats of approved anticorrosive bitumastic paint, necessary connection with existing line etc., complete as directed. 5 Each Full Conversion INR

12.06 Providing uPVC Floor Trap/ Multifloor trap of Ashirvad /Supreme make / Nahani Trap of 110 x 75 x 50 mm size size conforming to IS 14735 with CP jalli on top, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, closing the side inlets with plugs if required etc. all complete as specified and as directed 6 Each Full Conversion INR

12.07 Providing and fixing of best quality UPVC P trap conforming to IS 14735 for urinals of size 110mm X 110mm with 50mm water seal of Ashirvad /Supreme make with CP grating on top including necessary 1:2:4 cement concrete for embedding the trap connecting the trap to waste pipe, etc, complete as specified and directed.. 2 Each Full Conversion INR

12.08 Providing and installing at required depth poly ethylene vertical septic tank of required capacity of Sintex/Supreme/Ashirvaad make or approved equivalent, with suitable cover at top, including the required fittings/ gaskets connecting to the drainage line, all complete as directed by EIC 10000 Liter Full Conversion INR

13 SANITARY ITEMS :

13.01 Providing and fixing EUROPEAN WATER CLOSET of size close to the dimensions 350mmX480mmX395mm of Jaquar (CNS-WHT-551PSPP/551SSPP)/Hindware or approved equivalent , in white glazed vitreous, with integral 'P' or 'S' trap, Solid plastic heavy quality seat with lid of approved make and Colour with C.P.brass hinges, conforming to IS: 2548 (Part I & II), including cutting and making good floor, wall wherever required, including Providing and fixing single flush PVC low level flushing cistern of 10 litres capacity conforming to IS: 7231 (Cico/Jaquar/Hindware(Cat no. C-1010)/Parryware make) with all internal PVC fittings mounted on a pair of brackets of heavy quality with 32 mm n. b. PVC flush pipe with bend of required length, CP brass angle valve, connection pipe with CP brass unions, with all tools, synthetic adhesive, gasket etc. complete including connection to W. C. complete as specified and directed. 3 Each Full Conversion INR

13.02 Providing and fixing ORRISA PATTERN W.C. of size close to 580mm X 440mm of Hindware(Cat no. 20042)/Jacquar or approved equivalent , in white glazed vitreous, with integral 'P' or 'S' trap, Solid plastic heavy quality seat with lid of approved make and Colour with C.P.brass hinges, conforming to IS: 2548 (Part I & II), including cutting and making good floor, wall wherever required, including Providing and fixing single flush PVC low level flushing cistern of 10 litres capacity conforming to IS: 7231 (Cico/Jaquar/Hindware(Cat no. C-1010)/Parryware make) with all internal PVC fittings mounted on a pair of brackets of heavy quality with 32 mm n. b. PVC flush pipe with bend of required length, cutting of chases and making surface good for flush pipe, CP brass angle valve, connection pipe with CP brass unions, with all tools, synthetic adhesive, gasket etc. complete including connection to W. C. complete as specified and directed. 3 Each Full Conversion INR

13.03 Providing & fixing Vitreous China semi pedestal Wall hung Wash Hand Basin, 570x480 mm size of HINDWARE Make Studio model Cat. No:10096 & pedestal 11038 or equivalent.consisting following items of work:- i)Providing vitreous china wash basin conforming to IS 2556 ( part - IV ) and placing the wash basin in position as shown in the drawing or as directed. ii) Providing a pair of either cast iron built - in cantilever type brackets weighing not less than 1.5 kg / each to be embedded in grade M 15 cement concrete block of size 100 X 75 X 150 mm or cast iron wall fixing cantilever type brackets weighing not less than 1kg / each with screw holes to be fixed to wall using screws, rawl plugs etc. to support the Wash basin.iii) Cutting holes or chases in wall & reinstating to its original condition, painting all metallic parts with two coats of approved flat oil paint over a coat of primer, finishing the gap with white / matching cement etc.all as per specification and as directed for wall hung basin. iv) Installation and testing the entire assembly to the full satisfaction of Engineer- in- charge. v) C.P. brass waste coupling of standard pattern, 15 mm n.b. screw down heavy quality C.P. brass stopcock, PVC connection pipe with CP brass unions, C.P. brass pillar cock, conforming to IS: 781., 32 mm CP brass bottle trap, with extension piece including painting of fittings and brackets, cutting and making good the walls wherever required complete as specified and directed. 4 Each Full Conversion INR

13.04 Providing & fixing Vitreous China under the counter WASH BASIN of size close to 605mm x 430 mm x 200mm of make Jaquar(CNS-WHT-705)/Hindware or equivalent.consisting following items of work:- i)Providing Vitreous China under / over the counter / semi recessed type Wash Basin and placing it in position over the granite platform as shown in the drawing or as directed including finishing the joints with white cement all complete. ii) Providing a pair of either cast iron built - in cantilever type brackets weighing not less than 1.5 kg / each to be embedded in grade M 15 cement concrete block of size 100 X 75 X 150 mm or cast iron wall fixing cantilever type brackets weighing not less than 1kg / each with screw holes to be fixed to wall using screws, rawl plugs etc. to support the Wash basin. iii) Cutting holes or chases in wall & reinstating to its original condition, painting all metallic parts with two coats of approved flat oil paint over a coat of primer, finishing the gap with white / matching cement etc.all as per specification and as directed for wall hung basin. iv) Installation and testing the entire assembly to the full satisfaction of Engineer- in- charge. v) C.P. brass waste coupling of standard pattern, 15 mm n.b. screw down heavy quality C.P. brass stopcock, PVC connection pipe with CP brass unions, wall mounted/counter mounted C.P. brass sink cock with swan neck, conforming to IS: 781., 32 mm CP brass bottle trap, with extension piece including painting of fittings and brackets, cutting and making good the walls wherever required complete as specified and directed. 4 Each Full Conversion INR

13.05 Providing and fixing URINAL of size close to 385 mm x 325 mm x 635 mm of M/s.Jaquar(URS-WHT-13253N)/Parryware /Hindware make screwed to wall/dado with full threaded C.P. brass waste coupling to urinal, spreader, drain pipe including pressmatic single lever auto closing concealed urinal flush valve (PRS-CHR-073) and 32 mm CP brass bottle trap of make Jaquar (ALD-CHR-769L) or equivalent etc. complete as specified and directed. 4 Each Full Conversion INR

13.06 Providing and fixing in position of best quality rectangular shaped urinal PARTITION with frosted glass (8mm thick) of size 600mmX900MM of Jaquar (JSE-CHR-810BWF6090X)/Hindware/Paryware make or approved equivalent, inclusing removing of existing partition if required as directed by Engineer-in-charge. 4 Each Full Conversion INR

13.07 Providing and fixing in position bevelled plain edged mirror of required size made out of best Indian glass of superior quality of approved manufacturer, mounted on plywood sheet/ harboard/plain AC sheet of 6 mm thick fixed in position with four number of CP brass screws with detachable CP brass caps, washers, rawl plugs, etc., complete as directed. 6 Sqm Full Conversion INR

13.08 Providing & fixing in position following type CP fittings/ Fixtures/Faucets of 15 mm nominal dia. with ISI mark/ approved make including providing & fixing specials, wall flanges and fixing to concealed / exposed pipe line with leak proof threaded joints using tephlon tapes, testing the joints hydraulically to a pressure of 10 kg./ sq.cm, rectifying the leaky joints if any, including cleaning etc. complete all as per specifications.

13.081 Providing and fixing 15 mm n. b. heavy quality C. P. brass angle valve confirming to IS 8931 of make Parryware Code /hindware (F730039CP)/Jaquar or equivalent. 3 Each Full Conversion INR

13.082 Providing and fixing heavy quality fancy variety C.P. brass screw down 2 way BIB TAPS with wall flange of M/S. Jaguar (Cat.No. ORM 10041)/Hindware make conforming to IS: 8931 3 Each Full Conversion INR

13.083 Proving and fixing in toilets Health faucet of Jaguar Make (ALD-CHR-573) or equivalent with 1 metre long Easy flex tube in chrome finish and wall hook etc., complete as directed. 3 Each Full Conversion INR

13.09 Supplying following C.P Brass Bathroom / toilet accessories of following make and fixing on the wall using CP brass screws, rawl plugs etc. as per manufacturer's requirement all complete at the locations shown and as directed by the E-in-C.

13.091 Stainless steel Toilet Paper Roll Holder, recessed type with flap of Jaguar Cat. No.AHS - 1553 3 Each Full Conversion INR

13.092 Stainless steel Soap dish, recessed type of Jaquar Cat. No. AHS -1531. 3 Each Full Conversion INR

13.093 Liquid soap dispenser Jaquar CAN 1135N 3 Each Full Conversion INR

13.094 Glass shelf 600 mm long as per Jaquar cat. No: ACN-1171N 4 Each Full Conversion INR

13.095 Providing and fixing C. P. brass Twin Robe Hook, fixed to wall with C. P. brass screws, screwed on to rawl plugs etc., complete of Parry- ware/Hindware/Jaquar or equivalent. 3 Each Full Conversion INR

14 UTILITITES LINE:

14.01 Providing, laying, jointing, fixing and testing HEAVY QUALITY M.S. GALVANISED PIPES AND FITTINGS like tees, elbows, collars, unions, nipples, enlargers, reducers, bends, couplings and all other fittings required for the work, EXCLUDING FLANGES conforming to IS: 1239-1990 including testing the pipes and fittings for 10 Kg/cm2 pressure with a minimum period of two hours duration, (with clean water) including cutting to waste, threading with jointing materials like hemp yarn, white or red lead, in trenches, including painting with two coats of anticorrosive bitumastic paint/synthetic enamal over a coat of primer, as per specifications:

14.011 40 NB 10 RM Full Conversion INR

14.012 50 NB 10 RM Full Conversion INR

14.013 80 NB 10 RM Full Conversion INR

14.02 Supplying, fabricating and erecting / fixing in position the piping/puddle flange either inside plant building / in yard, at all elevations as indicated in the relevant drawings. Following specified materials shall be used. (1) Pipe: Carbon steel bevelled end seamless pipes conforming to ASTM A 106 Gr.B & dimensions conforming to ANSI B36.10 of approved make; (2) Fittings & Flanges: Carbon Steel fittings and flanges confirming to IS:6392 and dimensions conforming to ANSI B16.5 for Class 150 with 3mm thk neoprene gaskets of suitable grade, fastened using suitable carbon steel bolts, nuts and washers, as directed by EIC. (3) Welding & Clamping: Pipes to be welded using E-6010 / E-6011 / E-6012 / E-6013 / ER-308L electrodes of make M/s Ador / Advani / D&H / Phillips and to be supported with suitable clamps on mild steel structural frame work / tee supports. (4) Painting: Pipes to be painted with 2 coats synthetic enamel paint of make M/s Asian Berger over one coat of zinc chromate primer after proper surface preparation to the satisfaction of EIC. (5) Testing & commissioning: Pipelines to be DP tested and hydraulically tested segment wise at a pressure of 15 bar followed by flushing and commissioning including cost of all consumables, labour, etc., complete as directed by EIC

14.021 a) 80NB 5 RM Full Conversion INR

14.022 b) 200NB 5 RM Full Conversion INR

14.023 c) 300 NB 5 RM Full Conversion INR

15 DISMANTLING ITEMS:

15.01 Dismantling/breaking the existing plain cement concrete/reinforced cement concrete/bituminous surfaces carefully in flooring, platforms etc. at all depths and heights below and above plinth level using pneumatic cutters or any approved means including cutting the reinforcement and transporting bars to departmental stores including disposing of debris within a distance of 50 m etc., complete as specified and directed. 150 Cum Full Conversion INR

15.02 Dismantling very carefully the existing Brick/RR masonry/Pitching/Soling below/above FFL at all depths and heights including erection of suitable scaffolding, stacking of useful materials and disposing the unserviceable debris within the lead of 50m etc., complete as specified and directed. 25 Cum Full Conversion INR

15.03 Removing carefully existing chainlink fabric along with barbed wires from angle iron posts and struts by removing hook bolts, nuts, etc, straightening GI rods (vertical as well as horizontals) etc., rolling back the removed chainlink, collecting hooks, bolts and nuts, stacking including cutting of iron angle posts, transporting the materials to Departmental stores for all leads etc., complete as directed by Engineer-in-charge. Note: Only the area of the chain link fabric will be measured for payment. 180 Sqm Full Conversion INR

15.04 DISMANTLING OLD PLASTER OR SKIRTING, raking out joints and cleaning the surfaces for plaster including scaffolding, disposal of debris to the dumping ground within 50 metres lead. etc., complete as specified and directed. 100 Sqm Full Conversion INR

15.05 Dismantling very carefully the existing MS/GI/CI/RCC/PVC pipe of various dia upto 300mm for various service lines/hand rail with all fittings and fixtures etc., cutting the pipeline after shutdown, stacking with in ZC for all leads, including providing dummy flanges with approporiate gasket to the remaining pipe. 100 RM Full Conversion INR

15.06 Dismantling very carefully the existing structural steel work at all levels in MS structural sections like angles, channels, MS plain/chequered plates, flats, tubular gates etc., including scaffolding, cutting of structural steel members by gas cutters or by any approved method, removing the nuts, bolts etc., as required, lowering stacking the reusable material at site and transporting the material to Departmental stores for all leads etc., complete as directed 2 MT Full Conversion INR

16 Electrical Items

16.01 Supply and installation of 25 mm dia 1.8 mm thick PVC conduits and required junction boxes confirming to IS with accessories like bends, deep junction boxes, couplers etc (at least one for every 3m of length or as per site requirement whichever is higher) in wall , roof slabs, false ceiling etc, including cutting the wall/chasing and making good the same to the original finish complete (Make: Sudhakar/AKG).

16.011 Supply 50 RM Full Conversion INR

16.012 Installation 50 RM Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information