Mechanical works in New Maternity Hospital SKIMS soura

Amount

SITC of Mild steel ERW Hot Water Piping of C Class underground/ above ground complete with fitting etc as per specifications duly supported on angle iron supports. The job includes making holes in walls and then restoring the same to original decor after installation of pipeline.

Hot water pipe insulation Mikron (Mikasha) insulation with chicken and aluminium cladding of 24 gauge

50 mm (50 mm thick 750 gsm)

SITC of Non-return valves/ Y strainers/ balancing valve for central heating plant suitable for connecting in MS C Class piping as per relevant IS code. All valves/ Strainers shall be flanged type suitable for pressure and temperature of 16 kgf/ sq.cm and 100 deg. C respectively.

NRV 65 mm

Y strainers 80 mm

Y strainers 100 mm

Temperature gauges with isolation valve of suitable size

Balancing valve 32 mm

Balancing valve 100 mm

Air vents with isolation valves 25 mm

SITC of cubicle type electrical panel wall mounted, fabricated out of 14 SWG CRCA sheet steel totally enclosed with 03 nos 5 hp DOL Starters for motors with control wiring, suitable bus bar, on off push buttons, phase indicating lamps, single phase preventers arranged in 03 cubicles and 01 spare cubicle for MCCB/ MCBs of internal electrification.

SITC of 03 phase, Cu wound, 50 Hz, 10 kVA servo stabilizer suitable for motor load and shall operate on an input voltage of 180 = 460 volts phase to phase and output of 415 V ± 1%. The stabilizer shall be micro processor controlled and shall have digital display with high and low voltage cut off, single phase preventer, short circuit and over load protection complete.

Carriage of excavated material (from bulk oil tank pit)

M/s Bhat Engineering Works