SPECIAL REPAIR / REPLACEMENT OF FLAME PROOF

Amount

Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with FRLS PVC insulated unsheathed IS-694 marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including In stove enamelled Steel conduit size of not less than 20 mm including conduit fittings and acessories concealed in wall / ceiling wall terminated in sheet metal box along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS IS - 694 markd copper conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge. (Note : Cost of for cutting chaising and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.) One light point/fan point controlled by one switch one way.

All as per item No 2 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire required size all as specified and directed by Engineer-in-Charge.

Supply and fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V all as specified and directed by Engineer-in-Charge.

S&F flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth all as specified and directed by Engineer-in-Charge.

S & F Flame proof Weatherproof LED Wellglass Light Flying Saucer design with 120° Beam Angle lens with Citizen / Bridgelux make COB LED - 6500K with 120lm/watt & LED driver made in die cast Aluminium Alloy LM6 Suitable for Zone 1 & 2, gas group IIA & IIB, with IP65 ingress protection with all stainless steel hardware and painted with epoxy based powder coated structured paint having temp class T6 certified by CIMFR + PESO as per Cat # SAI/WG/3010

Supply and fixing LED light fitting 2 x 16 watt Watt flame proof, CMRI certified commended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

Supply and fixing Fan regulator LM6 cable termination box in Sutaible for flame proof ceiling fan all as specified and directed by Engr-in-Charge.

S&F flame proof/ weather proof, ceiling Fan, explosion proof with CMRO tested & Certified motor, suitable for 1400 mm sweep, 4 blades having 1400 RPM, 240 V, AC, 50 HZ, with Suitable single phase Motor dynamically balanced blades to avoid frictional spark having 01 No. M-20 cable entry, duly epoxy powder coated complete in all respect with flame proof cable gland and deposit old fan in MES after disconnection the electric connection carefully complete, all as specified and directed by Engineer-in-Charge.

S&F in replacement of exhaust fan 300 mm sweep 230 Volt, 1400 RPM including necessary fixing arrangement for proper fixing in wall as per site requirement and the electric connection carefully complete all as specified and as directed by Engineer-in-Charge.

S&F Wall mounted fan 1440 RPM, 440 V Aluminium body, single phase, heavy duty as per site requirement and deposit old wall mounted fan in MES after disconnection the electric connection carefully complete all as specified and as directed by Engineer-in-Charge.

M & L for sub main wiring with two single core FRLS, stranded, unsheathed cable copper conductor of size 06 Sqmm and drawing through & including stove enamelled Steel ,conduit concealed in wall including earth continuity conductor of size 06 Sqmm PVC insulated unsheathed stranded copper conductor cable and connected to earth dolly to be drawn in stove enamelled Steel conduit including connecting to main board inlcd taking down complete. Note:- One run of steel conduit and 3 Runs of 6.0 Sqmm single core wire shall be measured as one unit.

Supply and fixed in repairs flameproof Weather proof Junction Box 100mm dia 4-way with 3/4” ET Cable Entries with terminal block rated 32A made in die cast Aluminium Alloy LM6 Suitable for Zone 1 & 2, gas group IIA & IIB, with IP65 ingress protection with all stainless steel hardware and painted with epoxy based powder coated structured paint having temp class T6 certified by CIMFR + PESO as per Cat # SAI/JB/1003

S&F in repairs Flameproof Weatherproof MCB Distribution Board made in die cast Aluminium Alloy LM6 Suitable for Zone 1 & 2, gas group IIA & IIB, with IP65 ingress protection with all stainless steel hardware and painted with epoxy based powder coated structured paint having temp class T6 certified by CIMFR + PESO consisting of : 1 x 40A SPN MCB as incomer 8 x 6A SP MCB as outgoing With internal wiring

J.P. Enterprises

YANSHIKA SECURITY SERVICES

shakti construction

Commercial Traders

M/S LADPURIA ENTERPRISES

UNITED ENGINEERING CORPORATION