Construction of a Fertilizer Godown (Prefab) at cold store Agling

Amount

Surface dressing of the ground including removing vegetation and in-equalities not xceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil

Dumping stone including cost of stones in Horizontal on level

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Structure- supply and fixing of super structure will be made out of MS tubular pipe of size 100x100x3.5 mm and 100x50x2.5 mm for truss and purlins connected to each other and cutting welding as per site requirement including loading, unloading and transportation all complete job.

Wall (puf Panels) - Supply of Puf Panel will be made out of 0.5mm thick puf panel with overall thickness of 50mm with cam locking system as per site requirement with framing of tubes section of 50x50 mm including

Roof- Supply of panel will be made out of 0.5mm ppgi sheet with 50/80 ppgi puf corrugated sandwhich with cutting and welding as per the site requirement. Including loading, unloading, transportation all complete job

Puf- Door Supply and fixing of Puf panel dooor of thickness 50mm with Lock(L- drop and fixied in the door jammer as oer the site requirement. Including loading, unloading, transportation all complete job

Aluminium Window- upply and fixing of aluminium ppc windowof double track with glass of thickness 5mm as per the site requirement (3'x3) including. Loading, unloading and all complete job.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover

Providing and fixing ball gearing for rolling shutters.

Carriage of material by a)Cement an avg lead 2 km

b)Sand avg lead 12 km

c) Aggregate avg lead 12 km

d)Stone avg lead Earth 15 km.

ART INFRA

M/s ZAHOOR AHMAD KHAN

M/S MOHAMMAD MOSSA

M/S GHULAM MUSTAFA

SHUBHOM PREFABS AND ASSOCIATES