Repair and renovation of BLT and EC, Niali, Cuttack

Excavation of foundation in hard soil within 50 m initial lead and 1.5 m initial lift including rough dressing and levelling as per the direction of engineer in charge

Filling foundation and plinth with sand well watered and rammed including cost and conveyance of materials.

C.C.(1:4:8) with 4 c.m. size h.g. metal in F&P.

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the EIC.

Plain cment concrete (1:2:4) using 12 mm size hard granite crusher broken chips of approved quality

Brick work with Flyash brick having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4) in foundation and plinth

(a) foundation and plinth

2.5cm.grading concrete (1:2:2) on roof slab using 6mm.size CBHG chips on new work per 1 sqm

(a) ground floor

(b) first floor

Finishing wall surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

(a) ground floor

(b) first floor

12mm. thick cement plaster in c.m. 1:6 over brick masonry

(a) ground floor

Priming one coat with cement primer water bound complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,etc. complete as per the direction for the EIC.

(a) ground floor

(b) first floor inside

c) first floor outside

Providing, fitting and fixing of false ceiling with 12 mm thick gypsum board, Aluminium anodised T Section No. 3215 with 2'-0" centre to centre, L section No. 1705 up to 15 micron on 4 walls to be fixed by means of steel screw and PVC plug and the Aluminium grid 2'-0" x 2'-0" suspended from ceiling etc. complete. (Data for 14'-6" x 14'-6" = 210.25 sft or 19.53 sqm)

Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work , etc. complete as per the direction for the EIC.

(a) ground floor

(b) first floor

Finishing exterior walls with Weather Seal Coat Paint of approved shade on new work two coats to give an even shade complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

(a) ground floor

(b) first floor

Priming one coat with red oxide primer

Painting two coats with approved paint on iron work complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work , etc. complete as per the direction for the EIC.

Fixing Vitrified tiles Plain (1200 mmX600 mm) in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of

Fixing Vitrified tiles Plain (1200 mmX600 mm) in dados skirting and risers of stepson 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge.

Dismentalling & Removing old Damage Tiled Flooring

Iron work wrought and put up in grated doors, windows and cage latrines

Iron work wrought and put up in trusses and record racks

Fixing GCI sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. excluding cost of fitting per 1 sqm.

Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC.

Supplying and fixing LED Bulb/Ceiling Led Light(Panasonic/Philips) ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

15 watt led bulb

10 watt ceiling led light

20 watt ceiling led light

Supply, Installation, Testing and Commissioning of ceiling fan (Havells Festiva 1200 mm), including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Providing & Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Providing & Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick alongwith 1 x1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex/ L&T/Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 25 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired. (Make of wire Finolex /L&T /Anchor /Havels /V Guard) complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply, Installation, Testing and Commissioning of Air conditioner (Carrier 1.5 ton 5 star inverter split AI), including stabiliser,stand,installation as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supply, Installation, Testing and Commissioning of Inverter with 2 nos of Battery (Luminous Optimus 2800 Pure Sine Wave 2500VA/24V inverter/Luminious inverter battery 180ah), includingstand,installation as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the EIC.

Supplying all materils,labour,T&P and fixing Rotational moulded polithylene cylindrical vertical water storage tanks (SYNTEX)conforming to IS 12701-1996 Including cutting holes through the tank and fixing mild steel tubes and fittings and providinng extra socket and jam nuts,fixing ball valave etc,including hoisting up to a height of extra 5 Meters above ground level and placing the tank to the required position etc, all as per speci fication and directionof the Engineer incharge.1000 liter capacity Syntex/FC Tank

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of PVC pipes,class- confirming to ASTM-D-1785/89(Sch-80) and pipe fittings of the following nominal bore with clamps fittings including making good the wall,ceilling and floor,testing all complite as per specification and direction of the Engineer -in-charge. (15mm dia pvc pipe)

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CPVC pipes, confirming to IS:15778 having thermal stability for hot &cold water supplay,including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m specing, with jointing the pipes with CPVC solvent cement and testing the joints complete as per specification and direction of the Engineer -in-charge. (25 mm dia cpvc pipe)

Supplying all materals,labours, taxes and tools and plants for fittings and fixing of brass screw-down Bib cock(Tapes)/CPittings of the following ISI approved make including supplay all nessary jointining material compliteas per specification and direction of the Engineer -in-charge.

15 mm dia CP Brass Short Body Bib cock .

15 mm dia CP Brass long body Bib cock .

15 mm dia CP angle stop cock

15 mm dia CP flanges

125 mm da CP grating

Supplying, fitting, fixing of 15mm dia. PVC connection pipe for pillar cock, supply mains for wash basin etc. Complete.

Supplying all materials,labour,T&P and fitting, fixining ,laying in trenches High Density Polythine pipes conforming to IS-4984-1995 and specials of the following outside diameter conformoring to Class 1 to Class 3 and jointing by fusion welding method including testing as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge (Earth work in trenches measured separetly). (110 mm hdpvc pipe)

Supplying all materials,labour,T&P and fitting, fixining of white glazed vitreous china sqatting pan of size 580 mm x 440 mm size duly embedded in cement concrete (1:4:8) using hard granite metal 4 cm. nominal size and cement mortar (1:1),cutting the floor and mending good the damages etc,all complite as per specification and direction of the Engineer inchargr. 580 mm x 440 size White glazed Virtious Odisha pattern squating pan Pan (Parry wire/Hindu stan make)

Supplying all materials,labour T &P Fitting of 10 liters capacity PVC L L flushing Cistern with manually controlled device(handle lever) conforming to IS :7231,etc all complite as per specification and direction of the Engineer incharge. 10 Liters P.V.C.low level Flushing Cystern

Supplying all Materials,labour, T&P fitting,fixing of Porcelain Counter Top Basin Oval Shape (450x400) with hole for pillar taps conformoing to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All compiled as per specificationand direction of the Engineer-in-charge.Porcelain Counter Top Basin Oval Shape (450x400)Parryware make

Supplying all materils,labour, T & P fitting,fixing of PVC waste pipe for wash basin or sink i.e Flexiable (Coil shaped) PVC Waste pipe 40mm dia with length not less than 700 mm with PVC waste fittings etc. All complite as per specificationand direction of the Engineer-in-charge. Flexible (coil shaped) PVC waste pipe for sink & wash basin 32 mm dia with 900 mm long waste fittings

Supplying all materils,labour, T&P fitting,fixing of CP brass towel rail wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. 25 mm dia x 600 mm long.

Supplying all materils,labour, T&P fitting,fixing of bevelled type plate glass mirror with wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. 600 mm x 450mm

Supplying all materils,labour, T&P fitting,fixing of Cp soap Holder standard sizewith wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge.

Supplying all materils,labour, T&P fitting,fixing of CP brass towel ring wooden plugs CP srew and cement etc. All complite as per specificationand direction of the Engineer-in-charge. CP Brass Towel Ring

Supplaying all materals,labours, taxes and tools and plants for fittings and fixing of CP Brass Shower rose with CP revolving Shower bend type(Parryware make) with 15 to 20 mm inlet & 150 mm dia etc compliteas per specification and direction of the Engineer -in-charge.

Supplying all materials,labour,T&P and fitting, fixining following PVC items and filling of the following outside diameter conformoring to IS 13592 Type A, to walls with seal ring conforming to IS:5382,leaving 10 mm gap for 10mm thermal expansion,(1) single socket pipes as per manufactures specification testing, all complite as per specification and directionof the Engineer incharge. ss.

110 mm dia UPVC pipe (4 kgf/cm 2 )

110 mm dia UPVC door Tee

110 mm dia UPVC door bend

110 mm dia UPVC plain Tee

110 mm dia UPVC plain bend

110 mm dia UPVC Cowl

Please Enable Macros to View BoQ information