COMPREHENSIVE MAINT OF FIRE FIGHTING SYSTEM SOFTWARE CONTROL PANEL FIRE ALARM SYSTEM SMOKE DETECTORS AND REPAIR MAINT OF INCINERATOR LAUNDRY MACHINE INSTALLED AT MH AND OTHER CONNECTED WORKS UNDER GE MIS MHOW

Amount

COMPREHENSIVE MAINT OF FIRE FIGHTING SYSTEM, SOFTWARE, CONTROL PANEL, FIRE ALARM SYSTEM, SMOKE DETECTORS

M&L for Quarterly Maintenance, check up as specified here in after in notes and preparation of log book and periodic report of Fire hydrant pump House & Fire Hydrant , Sprinkler System along with servicing of complete system installed in pump Houseincluding components such as valves, pumps, air cushion tank, pressure switches, gauges, Panels etc complete all as specified and directed by Engineer-in-charge.

Note : Componets spares as required during servicing shall be measured and paid separeately under relevant item as supply only.

Quarterly checking of Diesel Engine driven fire pump, Jockey pumps & Electrical driven main fire pump Including servicing and greasing , overhauling, tightening of nut, bolts and other spares as required shall be inclusive in the quoted rate. Consumable required for Diesel engine driven fire pump such as Diesel, coolant, lubricants and spares shall be measured and paid separately or provided by Department. Maintain and ensure for pump and Engine in proper working condition and ready for operation and including preparation of service report and maintaing log book.

Quarterly checking of Pre charged Air vessel including servicing, greasing, overhauling, tightening of nut bolts and other spares as required shall be inclusive in the quoted rate. Maintain and ensure for proper working condition and ready for operation and including. Preparing of service report and maintaining log book.

M&L for Quarterly Maintenance, check up as specified here-in after in notes and of log book and periodic report of Fire alarm system internal system along with servicing of complete system including components such as detectors, Panels, Manual call box, Hooters, etc complete all as specified and directed by Engineer-in-charge.

NOTE : Components/ spares as required for servicing shall be measured and paid separately under relevant item.

Checking of pressure gauge & level indicator and replacing faulty PG with isolation ball valve .

Quarterly checking hydrants, Sprinkler, piping including servicing greasing , overhauling, tightening of nut bolts and other spares, as required shall be inclusive in the quoted rate. Maintain and ensure for proper working condition and ready for operation and including preparing of service report and maintaining log book.

Quarterly checking, oiling, greasing (if required) including necessary labour charges.

Quarterly checking, oiling, greasing ( if required) replacing Gate valves, butterfly valves, NRV, Check Valves, expansion bellows, spring-loaded valves , control valves, forged brass ball valve test assemblies etc ( of all dia.) including necessary labour charges.

Quarterly checking, oiling, greasing ( if required) of fire hydrant landing valve

Quarterly checking, cleaning and servicing of Hose reel drum for smooth functioning.

Checking of rubber reinforced lined fire hose

Checking of Main Control Panel for Fire Fighting pumps , including wiring , repairing and replacing of faulty cables, wires, and other components such as MCB, MCCB, relays, contactors etc.

Supply,install, testing and commissioning of Fire installation graphics software (Hochiki) for smoke detector -687 Nos., MCP -18 Nos, Hooter -18 Nos, Fault Isolator unit - 22 Nos, UL/EN 54 listed strobe-06 Nos, UL listed hooter with two frequencies of 700 Htz & 1200 Htz -18 Nos, Fire alarm control panel (6 loop) - 01 No & Fire alarm system with piezo sound - 1 No (Make : Hochiki) including providing necessary drawings and check list as per OEM's specifications complete all as specified and directed by Engineer-in-charges at site.

S&F in repairs fire hose cabinet of size 1250x1800x600 mm , weather proof , fabricated with 16 gauge MS sheet ,duly welded with hinged double front door , partially glazed with 4 mm thick glass and necessary locking arrangement duly painted with two coats of synthetic enamel postal red paint over a coat of red oxide zinc chromate primer including writing " Fire Hose Box " on front of cabinet, suitable to each house 2x15 metre ( two lengths ) of canvas hose with couplings , branch pipe , One fireman's axe , first aid fire hose reel and hydrant outlet complete all as specified and as directed by Engineer-in-charge

S&F in repairs standard short gun metal branch pipe with gun metal nozzle 16 mm dia outlet and standard male instantaneous spring lock type 63mm dia 0 coupling ( Branch pipe and nozzle shall be ISI marked with ( IS: 903-1986 ) complete all as specified and as directed by Engineer-in-charge

S&F in repairs standard fireman's axe with heavy insulated rubber handle complete all as specified and as directed

Supply , fixing , testing and commissioning in repairs single acting air - cushion tank of 250mm dia and 1000mm high with dished top , made of minimum 6mm thick MS pipe / plate complete with and including 25mm dia gun metal stop valve , 25mm dia air release valve , pressure gauge and all accessories as required complete all as specified and as directed by Engineer-in-charge

S&F in repairs 5 Kg capacity carbon - di - oxide ( CO2 ) type fire extinguishers consisting of welded MS cylindrical body , squeeze lever discharge valve fitted with pressure indicating gauge , internal discharge tube , 30cm long high pressure discharge hose , discharge nozzel , suspension bracket , conforming to IS : 2878 finished externally with red enamel paint and fixed to wall with brackets including intial charge complete all as specified and as directed by Engineerr-in-charge. Note : -(a) The body of fire extinguisher shall be CCE approved with IS : 2878 marking and duly showing the filling and validity date

Supply , fixing , testing and commissioning in repairs of 8 Zone Microprocessor based Fire Alarm Panel for Manual Call Box with response indocator as per IS 2189 : 1999 including the arrangement of Audio / Visual indications by dual lamps of fire and 1.26 faults in each zone and finished in slove, having sealed Nickel Cadmium each set 10000.00 maintenance stand and boost/trickle charger, DC voltmeter, short circuits healthy check etc. complete all as specified and as directed by Engineer-in-charge

S&F in repairs 63 mm dia 15 metre long Reinforced Rubber Lined ( RRL ) Type ' A ' ISI marked ( IS - 636 ) , woven jacketed hose pipe tested to bursting pressure 32 Kg / Sqcm with and including gun metal male & female instantaneous type coupling approved by fire authority , ISI marked ( IS : 903 ) , machine wound with Gl wire and pipe complete in all respects , all as specified and as directed by Engineer-in-charge.

S&F in repairs internal fire hydrant comprising of and including single headed stainless steel body fire hydrant valve , 100 mm inlet with single outlet with control and fitted complete with 63 mm dia female instantaneous coupling of stainless steel conforming to type " A " of IS : 5290-1977 on the outlet complete with orifice flangs as required with ABS plastic blank cap, steel chain adaptor as per IS Specifications as required including 6 mm thick Stainless Steel Orifice Plate of suitable size as required, complete all as specified and as directed by Engineer-in-charge :-Note : Quoted rate shall be inclusive for sealing of threaded parts with " Holdtite "

Supply and fix in repairs Fire hose reel 30 meter length with drum

Supply and fix in repirs fire brigade inlet connection (hydrant) 2 way

Supply and fix in repairs brass Air Release valve of size 25 mm

Supply & fix in repairs Forged Ball Valve of size 25/20 mm

S&F in repairs 200mm dia , Class - 1 butterfly valve conforming to IS 13095-1991 type PN 1.6 with flanges , bolts , nuts , gasket etc. as per specifications complete in all respects, hydraulically tested to 20kg / sqcm , complete all as specified and as directed by Engineer-in-charge .

S&F in repairs 150mm dia , Class - 1 butterfly valve conforming to IS 13095-1991 type PN 1.6 with flanges , bolts , nuts , gasket etc. as per specifications complete in all respects, hydraulically tested to 20kg / sqcm , complete all as specified and as directed by Engineer-in-charge .

S&F in repairs 100mm dia , Class - 1 butterfly valve conforming to IS 13095-1991 type PN 1.6 with flanges , bolts , nuts , gasket etc. as per specifications complete in all respects, hydraulically tested to 20kg / sqcm , complete all as specified and as directed by Engineer-in-charge .

S&F in repairs 80mm dia , Class - 1 butterfly valve conforming to IS 13095-1991 type PN 1.6 with flanges , bolts , nuts , gasket etc. as per specifications complete in all respects, hydraulically tested to 20kg / sqcm , complete all as specified and as directed by Engineer-in-charge .

S&F in repairs sprinkler glass bulb type (Standard response) as per IS :15106 / TAC guidelines 68 Degree temperature rating Pendent type.

Supply, fixing, testing and commissioning in repairs Fire alarm panel installation Control valve of turbine type automatic alarm gong , connected with control valve drain & test valve including other necessary components as per OEM's specifications complete all as specified and directed at site.

S&F in repairs Stainless steel Coupling set (male & Female) for RRL hose pipe 63 mm dia

S&F in repairs Pressure gauge with siphon tube and isolation ball valve (glycerine filled)

Supply and fix in repairs pressure switch universal type

Supply and fixing in repairs HRFR single core stranded copper conductor cable of size 1.0 sqmm

S&F Pvc single core stranded copper conductor cable of size 1. 5 sqmm

S&F Pvc single core stranded copper conductor cable of size 2. 5 sqmm

S&F in repairs addressable Smoke detectors as per existing make and compatible to existing alarm system.

S&F in repairs addressable manual call point as per existing make and compatible to existing alarm system.

S&F in repairs addressable Hooters with flash light as per existing make and compatible to existing alarm system.

REPAIR/ MAINT OF INCINERATOR & LAUNDRY MACHINE INSTALLED AT MH AND OTHER CONNECTED WORKS

M&L for Servicing Laundry machine of 30Kg capacity installed at MH Mhow by taking out and removing unserviceable/defective parts/spares,cleaning, descaling of water chambers, door gaskets ,oiling, leath work and greasing of necessary parts, refixing the serviceable parts in position after servicing, replacement of unserviceable spare pats, refixing of all accessories for smooth functioning and testing on full load complete all as specified and directed by EIC. Note- Spare part as required shall be measured and paid seprately.

Following spare / repair parts for laundry machine of 30Kg capacity :-

Supply only Bearing as per existing, (Set of three)

Supply only Oil seal as per existing, (Set of four)

Supply only Oil set lock pin as per existing, (Set of four)

Supply only Fan Belt, as per existing (Set of Two)

M& L for removing the Shock absorbers (Set of Eight) from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed

M&L for dismantling, taking out induction motor for repair work and rewinding of motor 12.5 HP Clock wise and Anti clock wise movement of existing guage including transportation to local work shop from exiting place and vise versa and refixing the same at its original place and testing complete all as directed by Engr in charge.

M& L for replacement of Hose Pipes (Set of five ) from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed

M& L for replacement of Clips for Hose pipe ( Set of ten) from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Air Solonite Switch from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

Supply only Special Grease for High tempreature.

M& L for replacement of Sensor drain from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Sensor autocut from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Door Gaskit from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of PU pipe from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of PU Conductor from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

Supply only Chemical of sulferic acid for cleaning purpose

Supply only Nut & Bolt as per existing

M& L for replacement of Heating element of 3 KW from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Temperature Guage from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Door Lock from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Door Lock pistol from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Door Lock Handle from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Balancing Spring from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M&L for servicing, Laundry machine of 15 Kg capacity installed at MH Mhow by taking out & removing unserviceable/defective parts/spares,cleaning, descaling of water chambers, door gaskets ,oiling, leath work and greasing of necessary parts, refixing the serviceable parts in position after servicing, replacement of unserviceable spare parts, refixing of all accessories and made Laundry machine for smooth functioning and testing on full load complete all as specified and directed. Note- Spare part of Laundry machine shall be measured and paid seprately.

Following spare / repair parts for laundry machine of 15Kg capacity :-

M& L for replacement of Door Gaskit from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M&L for dismantling, and taking out induction motor for repair work by rewinding of motor 25 HP Clock wise and Anti clock wise movement of existing guage including transportation to local work shop from exiting place and vise versa and refixing the same at its original place and testing complete all as directed by Engr in charge.

Supply only Bearing as per existing, (Set of three)

M& L for overhauling Hose Pipes (Set of five ) from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed

M& L for replacement of Fan Belt (Set of Two) from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed

M& L for replacement of Air Solonite Switch from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Sensor drain from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Sensor autocut from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of PU pipe from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of PU Conductor from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of old Shock absorbers (Set of Eight) from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed

M& L for replacement of Heating element of 3 KW from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Oil seal as per existing (Set of four) from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Oil set lock pin ( Set of four) from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Clips for Hose pipe ( Set of ten) from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Door Lock pistol from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Door Lock Handle from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Balancing Spring from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M&L for repair/cleaning/greasing/descaling /Service/maintenance of MH Mhow Laundry plant wash Dryer of capacity 15 kg complete all as directed at site. Note- Spare as required shall be measured and paid seprately.

Following spare / repair parts for laundry plant wash dryer of 15Kg capacity :-

Supply only Fan Belt (Set of Two)

M& L for replacement of PU pipe from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of PU Conductor from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Air Solonite Switch from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Heating element of 3 KW from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

M& L for replacement of Sensor autocut from luandary machine and reassembling the same to the existing position and testing complete all as specified and directed.

Supply & Fix Contactor for Dryer panel

M&L for repair/ Maintenance of Automatic press of Laundry plant at MH . Mhow complete all as specified and directed by EIC. Note- Spare as required shall be measured and paid seprately.

Following spare / repair parts for Automatic press of Laundry plant

Supply only Air Solonite Switch

Supply only Sensor autocut

Supply only PU Conductor

Supply only PU pipe

Supply only ID fan

Supply only Drain level Guage

M& L for replacement of Hydrolic pump after from luandary machine and reassembling the same to the existing position, after making in to serviceable condition including winding and servicing, testing complete all as specified and directed.

M&L for dismantling, and taking out induction motor for repair work by rewinding of Motor 3 HP Clock wise and Anti clock wise movement of existing guage including transportation to local work shop from exiting place and vise versa and refixing the same at its original place and testing complete all as directed by Engr in charge.

M&L for repair /Maintanance of Air compressor of Laundry plant at MH . Mhow complete all as specified and directed by EIC. Note- Spare as required shall be measured and paid seprately.

Following spare / repair parts for Air compressor of Laundry plant

Suppply only Pistol Ring

Supply only Oil seal

Supply only Fan belt

Suuply only Autopressure Guage

Supply only Air Pressure Timer

Supply only packing Kit

Supply and fix in replacement of synchronous motor , Type: ME 7991 , 220 V +/- 10 %, 50 HZ, 3 W all as specified and directed by Engineer-in-charge. Make:- As per site (MUKUND SR. NO- L13)

Taking out / removing unserviceable VFD installed in Laundery machine for 12.5 HP Motor Make- Toshiba and shift to Manufacturer workshop for repairing and refixing the same in position after repairing and testing on full load complete all as specified and directed by Engineer- in- charge. Note:- Repairing shall be carried out TOSHIBA'S authorised workshop

M&L for servicing of Incinerator of model No PGVS 40 OF Make: THERMAX of capacity 20Kg/Ltr by taking out & removing unserviceable/defective parts/spares,cleaning, descaling burners chambers, door gaskets , and necessary required spare parts, refixing all in its original position after servicing, replacement of unserviceable parts, refixing of all accessories and testing on full load complete all as specified and directed by Engr-in- charge. Note:- Spare part as required shall be measured and paid seprately.

Following spare / repair parts for Incinerator

Supply and fix in replacement spray Nozzle

Supply and fix in replacement photocell

Supply and fix in replacement Ignition electrode (4 electrodes in each set)

Supply and fix in replacement diffuser plate

Supply and fix in replacement spray nozzle holder (Brass)

Supply and fix in replacement electrode connector (Brass)

Supply and fix in replacement electrode caps

Supply and fix in replacement solenoid valve

Supply and fix in replacement Ignition Transformer

Supply and fix in replacement Burner cone (S.S) for primary chamber Burner

Supply and fix in replacement Burner cone (S.S) for secondary chamber Burner

Supply and fix in replacement Sequence controller

Supply and fix in replacement temperature Indicator and controller for (TIC)

Supply and fix in replacement limit switch for charging door

Supply and fix in replacement wire rope for chimney support (Dia.12 mm )

Supply and fix in replacement fuel pump coupling with rubber spider

Supply and fix in replacement fuel filter assembly

Supply and fix in replacement water pressure switch

Supply and fix in replacement ID Fan bearing with its connected items.

Supply and fix in replacement ID Fan blade with connected items bush, cater pin etc complete all as specified and directed by Engineer-in-charge..

Supply install tesing and commisssioning Hepa filters Iframe with CRCA Steel casing with epoxy powder coated/Aluminium of imported micro fibre glass media with efficiency 99.97 down to 0.3 micron of size 610x305x150mm including taking down unserviceable one all as specified

Electromech Engineers

vinayandsons

Vinayak Trading House

Continental Engineers and contractors

cooltech engineering services

Shree Ayyappa Engineering