Erection of octagonal poles at Dr.Ambedkar nagar Chenpeth of ward no.56 of Hubli Division

Erection of octagonal poles at Dr.Ambedkar nagar Chenpeth of ward no.56 of Hubli Division

1.4.1 In all kinds of soils Depth upto 1.5 m Earth work excavation for Foundation Dimension(LBD) =0.4mX0.4mX0.5m=0.08Cum Earth work excavation by manual means for drains, canals, waste weir, draft, ap...

Base Concerete 2.1.1 Mix 1:5:10 Using 40 mm nominal size graded crushed coarse aggregates PCC Dimension =0.4mX0.4mX0.1m=0.016Cum .Providing and laying in position Cement Concrete for levelling course ...

2.11 h. All other type of structures for TMT Steel Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cut...

Concerete 2.2.1 M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Providing and laying in Cement Concrete for all

Basement & surface level works, return walls,

retaining walls, ...

2.5.1 2C x 2.5 mm2 Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:...

5.7.2) 32Amps Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

5.13.1 ) 25 Amps Contactor Switch Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 R...

13.4.1 Single bracket 1.5 m. Length Supplying and fixing telescopic M.S. bracket fabricated byusing 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5mlong M.S.Bracket and are welded with suitab...

5.18.7) 6-32 A TPN MCB Switch Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 ...

5.18.1) 6-32 A SP MCB Switch Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 wit...

5.47) 3-120sec setting. Timer Switch Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.

1.6.1) Ordinary Soil Digging of Pit for providing GI Pipe type Earthing

3.9 Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.

5.42.3 MS Box Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front c...

Angle Iron Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approve...

Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sq mm

1.17.1 All kinds of soils. Depth upto 1.50 m Earth work excavation for Cables Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifi...

32.04 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm)UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or ...

66.05) HDPE/PLB Pipe 40/33 mm

Pot Head Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV. 35.01) Up ...

Pipe type earthing for each street light box 51.01) GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

51.02) Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

51.03) Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

4.2.3 5m - Top 70 mm and Bottom 130 mm dia Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for ...

11.8.2 LED Street light 40W Supply & Fixing of LED street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear...