Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.1 LAccepted-AOC MES WORKS SITE CARNICOBAR ANDAMAN NICOBAR ISLAND PIN 744301 | CARNICOBAR | NICOBAR | ANDAMAN AND NICOBAR ISLANDS | 744301 | L1 | Accepted-AOC Being lowest bid | |
| 2 | L2₹36.9 L+₹34,560 (0.95%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest bid |
Tender Value
₹37.1 L
EMD Value
₹74,200
Closing Date
22 Nov 2023, 6:00 pmClosed
GE (I) 866 EWS Carnicobar
GE(I)866 EWS CARNICOBAR PIN-913866 C/O 99APO
REPAIR MAINTENANCE OF STREET LIGHTS AND SECURITY LIGHT FITTING AND CONNECTED ITEMS AT AF STN CARNICOBAR
2023_MES_624334_1
8669/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE (I) 866 EWS Carnicobar
Please refer tender documents
9 documents required · 9 mandatory
₹500
GE (I) 866 EWS
₹74,200
Yes
6 Jan 2024
20 Oct 2023
29 Nov 2023
20 Oct 2023
22 Nov 2023
3 Nov 2023
Amount
S&F in repairs LED street light fitting 30 watt ( 3500 System Lumens ) with efficacy >105 lm/W, Wide voltage operating range of 140 V - 270 Volts & Wide temperature operating range: -10 °C to +50 °C with best in class design & roubst heat sink for better heat dissipation, electronic driver unit and IP, IK & Surge Protection including necessary mounting bolts, nuts and washers including taking down u/s fitting complete all as specified and as directed.
S&F in repairs LED street light fitting 50 watt ( 5000 System Lumens ) with efficacy >110 lm/W, Wide voltage operating range of 140 V - 270 Volts & Wide temperature operating range: -10 °C to +50 °C, with best in class design & roubst heat sink for better heat dissipation, electronic driver unit and IP, IK & Surge Protection including necessary mounting bolts, nuts and washers including taking down u/s fitting complete all as specified and as directed.
S&F in repair LED flood light 180 Watt ( 19800 System Lumens ) with efficacy >110 lm/W, Wide voltage operating range of 140 V - 270 Volts & Wide temperature operating range: -10 °C to +50 °C & Surge Protection Upto 10 kV, suitable for fixing on high mast pole, energy saving, environment friendly, long life, die-cast aluminium body with highly efficient LEDs as light source, including electronic dirvers and all fixing arrangement like nuts, bolts, washers or cross arms if required, including taking down old light, complete all as specified and directed.
S&F in repair LED flood light 150 Watt (16500 System Lumens ) with efficacy >110 lm/W, Wide voltage operating range of 140 V - 270 Volts & Wide temperature operating range: -10 °C to +50 °C & Surge Protection Upto 10 kV suitable for fixing on high mast pole, energy saving, environment friendly, long life, die-cast aluminium body with highly efficient LEDs as light source, including electronic dirvers and all fixing arrangement like nuts, bolts, washers or cross arms if required, including taking down old light, complete all as specified and directed.
S&F in repair LED flood light 50 Watt ( 5000 System Lumens ) with efficacy >105 lm/W, Wide voltage operating range of 140 V - 270 Volts & Wide temperature operating range: -10 °C to +50 °C, energy saving, environment friendly, long life, die-cast aluminium body with highly efficient LEDs as light source, including electronic dirvers and all fixing arrangement like nuts, bolts, washers or cross arms if required, including taking down old light, complete all as specified and directed.
Supply and fixing energy saving environment frindly & robust highbay LED light fitting with IP 65 protected luminaire of capacity 70 watts, ( 7500 System Lumens ) with efficacy >110 lm/W, Wide voltage operating range of 140 V - 270 Volts & Wide temperature operating range : -10 °C to +50 °C & Surge Protection Upto 10 kV complete all as specified and directed.
S&F in repairs LED street light fitting 70 watt ( 7500 System Lumens ) with efficacy >110 lm/W, Wide voltage operating range of 140 V - 270 Volts & Wide temperature operating range: -10 °C to +50 °C, made up of pressure die cast aluminium housing with high efficient LED as lighting source with toughned glass including electronic driver and IP 66 protection, impact resistance of IK07 & Surge Protection including necessary mounting bolts, nuts and washers including taking down u/s fitting complete all as specified and as directed.
S&F in repairs LED street light fitting 100 watt ( 11000 System Lumens ) with efficacy >110 lm/W, Wide voltage operating range of 140 V - 270 Volts & Wide temperature operating range: -10 °C to +50 °C, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having top opening separate driver compartment including electronic driver and IP 66 protection, impact resistance of IK08 & Surge Protection including necessary mounting bolts, nuts and washers including taking down u/s fitting complete all as specified and as directed.
Supply & fixing in replacement KIOSK Box (Junction box) weather proof made up of one piece mounted on SMC base and door pole mounted double door hinged (R) of size (325x220x150)mm comprising of aluminum bus bar 04 Nos of 100 Amps rating for 3 phase and neutral with holes of suitable size including nuts bolts and washers for looping of street light cable, with provision for & including one single pole MCB of rating 6 Amps for protection of steet light from short circuit, fixed on street light pole with clamps of suitable size made of FI 30x4mm with necessary MS nuts bolts and washers and including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface complete all as directed.
Supply, erect and fixing in replacement prestressed concrete pole 9m long having dimentions 150mmx125mm at top and 350mmx 250mm at bottom class 10 including dismantling the existing old damaged broken pole complete all as specified and as directed. Note:- (i) The rates quoted by the contractor shall deemed to include the following provision also:- (a) demolition of existing concrete foundation of pole/Excavation in any type of soil, returning, filling and removal of surplus soi/debries to a distance of 50m. (b) Foundation in PCC (1:2:4) type D2 using 40mm graded stone aggregate. (c) Coping in PCC (1:3:6) type C1 using 20mm graded stone aggregate above (500x500x450) mm all around the pole including plaster work with cement mortar complete all as specified in SSR part I.
Supply and fixing in replacement security/street light bracket 1.5 Mtr long made out of "Medium grade" GI pipe of size 32/40 mm dia including necessary bending / welding drilling of holes etc and mounting/fixing on poles / walls etc with and including FI clamps of size 40mm x 6mm and suitable length with necessary nuts, bolts and washers complete all as specified and directed.
S&F in repairs PVC Conduit pipe of size 20mm including elbow, long bends, saddle clamps, nuts, bolts and washers complete all as specified and directed.
S&F in repairs FR round PVC insulated multistranded copper conductor cable Twin core of size 2.5 Sqmm complete all as specified and directed.
Preparation of old painted surfaces of LT RCC poles complete including preparation of exposed surface by removing old paint from the pole with wire brush, cleaning the surface and applying two coats of synthetic enamelled paint including cross arms, MS strap, nuts, bolts, washers, cable protection pipe wherever provided etc and painting with one coat of aluminium paint and painting of bottom area of pole upto 2.1 m from ground level with synthetic enamel paint in alternate layer (30 cm wide) with black and yellow paint including writing pole numbers in white letter of approved size on black background complete all as specified and directed.
Supply and fixing in replacement MS cross arm, angle, clamps, nuts, bolts and washers and supply and fixing new MS Cross arms, bracings, supports, clamp and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts in any type, shape or as indicated and directed inclusive of one coat of red oxide and one coat of aluminium paint complete all as specified and directed.
Supply, laying, jointing and commissioning in replacment LT underground cables XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with multistranded aluminium conductors, 1100 volts grade cross sectional area 25 Sqmm 4 core including taking down unserviceable cable, laid in trenches complete all as specified and directed. Note: Excavation, RFR shall be measured and paid seperately under relavent items of BOQ
All as per item No 16.00 above but of size 16 Sqmm 4 core.
All as per item No 16.00 above but of size 10 Sqmm 4 core.
All as per item No 16.00 above but of size 6 Sqmm 4 core.
All as per item No 16.00 above but of size 6 Sqmm 2 core
Supply and laying double wall corrugated pipe (DWC) conforming to IS 19430 Part -1 of size 63mm outer dia and 50 mm inner dia complete all as specified and as directed.
Supply and laying double wall corrugated pipe (DWC) conforming to IS 19430 Part -1 of size 40 mm outer dia and 32 mm inner dia complete all as specified and as directed.
Excavation in trenches not exc. 1.5 m wide and not exc 1.5 m deep in soft/loose soil for laying of cables, GI pipe or filling of earth resistance enhance compound and getting out including levelling of bottom suface to required level complete all as specified and directed
Returning filling in including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and as directed.
Removing excavated material (ie soil) from site to a distance n. exc 50 m away and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed
Cutting of road of any description for crossing the cable across the road width through GI light grade pipe 50 mm dia and filling the road cutting with excavated materials including necessary returning filling in and including spreading, levelling, watering complee all as directed by Engineerin in charge.
M/L for plain cement concrete type B-2, 1:2:4 (40mm graded aggregate) 100mm thick, as in for making top surface of road cutting , finished fair & even complete all as specified and as directed.
M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finished without using extra cement above ground level complete all as specified and directed.
S&F in repairs LED 10 Watts inverted pyramid tripod type LED bollard with IP 65 protection, including nuts, bolts and other accessories for fixing complete all as specified and directed.
S&F in repairs LED 10 Watts, Bamboo type LED bollard with IP 65 protection, including nuts, bolts and other accessories for fixing complete all as specified and directed.
S&F in repairs LED 12 watts garden light with IP 65 protection, including nuts, bolts and other accessories for fixing complete all as specified and directed.
S&F in repairs LED 30 Watts Post Top gate light with IP 65 protection, including GI pipe of medium grade of suitable size grouted on the top of the pillars of gate with PCC complete all as and directed.
S&F in repairs LED street light fitting 20 watt ( 3500 System Lumens ) with efficacy >105 lm/W, Wide voltage operating range of 140 V - 270 Volts & Wide temperature operating range: -10 °C to +50 °C with best in class design & roubst heat sink for better heat dissipation, electronic driver unit and IP, IK & Surge Protection including necessary mounting bolts, nuts and washers including taking down u/s fitting complete all as specified and as directed.
S&F in repairs MCB TPN, 415 Volts, AC 50 Hz 63 Amps, 10 KA, 'B' curve complete all as specified and directed.
S&F in repairs MCB TP, 415 Volts, AC 50 Hz 40 Amps, 10 KA, 'B' curve complete all as specified and directed.
S&F in repairs MCB SPN, 230 Volts, AC 50 Hz 40 Amps, 10 KA, 'B' curve complete all as specified and directed.
S&F in repairs MCB SP, 230 Volts, AC 50 Hz 6 to 40 Amps, 10 KA, 'B' curve complete all as specified and directed.
Supply and laying GI pipe light grade 50 mm bore under road crossing or on poles for protection of cable complete all as specified and directed..
S&F in repairs PVC insulated twin core cable of size 6 Sqmm with solid aluminium conductor complete all as specified and directed.
All as per item No 39.00 above but of size 10 Sqmm.
Supply and fixing in repairs energy saving environment frindly & robust highbay LED light with PDC housing suitable for Ceiling (Surface / Suspended) mounting IP 65 protected luminaire of capacity 150 watts, ( 22500 System Lumens ) with efficacy >150 lm/W, Wide voltage operating range of 140 V - 270 Volts & Wide temperature operating range: -10 °C to +50 °C & Surge Protection Upto 10 kV complete all as specified and directed.
Supply and fixing in repairs new generation IP 65 protected LED 50 Watts post top energy saving environmental friendly, long lige aesthetically designed with good indirect symmetrical light distribution, die cast aluminium landscape lumination with high power COBLED as light source complete all as specified and directed..
Supply and fixing in repairs multicolour flood light 50 Watts with automatic colour changing mode, water proof complete all as specified and directed.
Supply and fixing in repairs new generation IP 65 protected LED 35 Watts post top energy saving environmental friendly, long lige aesthetically designed with good indirect symmetrical light distribution, die cast aluminium landscape lumination with high power COBLED as light source.
S&F in repairs electronic drivers for LED street / Flood light fittings of rating 20/30 Watts complete all as specified and directed.
All as per item No. 45.00 above but of ratings 45 to 60 Watts.
All as per item No. 45.00 above but of ratings 70 to 100 Watts.
All as per item No. 45.00 above but of ratings 150 to 200 Watts.
M/S. RUDRA ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .