SPECIAL REPAIR TO FALSE CEILING WALL PANELLING CERTAIN OTHER BR WK AT BLDG NO CB 03 BAYONET SCHOOL BAYONET AMPHITHEATRE AND ADDN ALTN IN SILVER ROOM OF INF MESS AT INF SCHOOL UNDER GE MIS MHOW

Amount

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding (but not backing) and rubbish off the primeses complete all as specified and directed.

M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT)/ Polished Glazed Vitrified Tiles (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.36 sqm but not exceeding 0.72 sqm ( ie) size 600x1200 in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles. Note : (a) Size and pattern / texture of GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE. (b) Glazed Coating on GVT / PGVTshall not be less than 1mm thick .

All as per item No 3.00 above but as in skirting/ dado etc over and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified and directed.

M&L for scratch free Glazed (Porcelain) Vitrified Tiles(GVT) /Polished Glazed Vitrified Tiles (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm (ie) of size 600x600mm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles. Note : (a) Size and pattern / texture of GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE (b)Glazed Coating on GVT / PGVTshall not be less than 1mm thick .

All as per item No 5.00 above but as in skirting/ dado etc over and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified

M&L for glazed ceramic coloured tiles (Matte /Gloss Finish) of size not less than 450x300x7 mm thick on vertical surfaces such as wall ,dado,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 15 mm thick backing coat on fair faces of brick work in cement mortar 1:4 complete all as specified and directed. Make of tile:- Superior quality tile from Kajaria/Somany/Orient tiles. Note:Pattern/Texture and finish of wall tile shall be approved by GE

M&L for non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular) of size 400x400mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. Make of tile:- Superior quality tile from Kajaria/Somany/Orient tiles. Note:Pattern/Texture and finish of wall tile shall be approved by GE

M&L for machine cut kota stone slab in flooring 20mm to 25mm thick laid over and including 15mm thick screed bed in cement mortar 1:6 and pointed with cement mixed with pigment to match with the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for 18mm to 20 mm thick Granite slab work (table rubbed and polish) of approved quality of required size in floor,wall,cooking platform and like bedded and jointed in grey cement slurry and pointed with coloured cement (1:2) usig marble dust with admixture of pigment to match the shade of granite stone laid over and including 20 mm thick screed bed in cement mortar 1:4 including polishing by using mechanical grinder complete all as specified and directed. Note : Size of Granite slab shall be maximum as available at market /as per site requirement and shall be approved by GE

M&L for PCC 1:4:8 type D2, (using 40mm graded stone aggregate) as in foundation filing,sub base of floor, etc complete all as specified and directed

M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in cement moratr 1:6 complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX40mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) for levelling course in floorscomplete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified

S&F PVC Ceiling Lining (False Ceiling) consisting of 5mm thick Plain colour PVC sheet 8 to 10 mm hollow section inclusive of solvent cement and fixing at site on frame work as per requirement on site complete all as specified and directed.

S&F Gypsum Board 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finish Ceiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed. Note: Placing of false ceilling is to be carried out upto 5.00m height in Classrooms.The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary arrangement work etc required at site complete all as specified and directed.

S&F PVC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm ( ±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement. The wall panaling consisting of PVC insulated panels having wall thickness of 2mm ( ±0.2 ) PVC sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, and the desired thickness of EPS ( Dependent on the Insulation Required ) screwed into the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panel on all four sides of the panel. The PVC Strips of 5mm ( ± 0.25 ) thick PVC Sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panels are joined, so as to cover the screw of both the panels, using solvent cement. 900 heat bent strips of 5mm thick PVC sheets of width 75mm x 75mm feathered at the edges shall be stuck at wall joints / pillars etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. Make- RAJSHRI / Make as per Particular specifications

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins arches pillars etc complete all as specified and directed.

M&L for brick work with flyash bricks modual size straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6., etc complete all as specified and directed.

M&L for brick work with flyash bricks modular bricks, straight or curved on plan to any radius built in cement mortar 1:4 in half brick thick walls complete all as specified and directed.

Taking down Cement Plaster of any description on Brick or Stone walls or Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land complete all as specified and directed.

Scrubbing down unevevan surface of wall to achive plan and even surface of wall, to be carried out by machanical means complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified and directed. Note:- Liquid water proofing compound to be measured paid separately

M&L for rendering 5mm thick in ceiling cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply onle liquid water proofing Compound complete all as specifed and directed.

M&L for applying two coats of first quality oil emulsion distember over a coat of primer on walls complete all as specified and directed. .

M&L for preparation of old decorated surface of wall including brooming , scraping down smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying two coats of first quality oil emulsion distemper white/coloured complete all as specified and direcetd.

M&L for new plastered surfaces of wall, pillasters, cornices etc precoat treatment apply two coats of Anti fungal weather coat acrylic emulsion paint over a one coat of wall care acrylic putty and apply coat of primer (X2) complete all as specified and directed. Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) Make of primer :- Asian (X2) or Equivalent as approved by GE. Note :- (a) Each stage i.e preparation of surfaces, application of putty, application of primer,application of first coat. application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

M&L for complete removal of old decorated plastered surfaces of wall,pillasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a one coat of wall care acrylic putty and apply coat of primer (X2) complete all as specified and directed. Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) or equivalent as approved by GE. Make of primer :- Asian (X2) or Equivalent as approved by GE Note :- (a) Each stage i.e preparation of surfaces, application of putty, application of primer,application of first coat. application of second coat will be got passed from Engr-in-Charge (b) Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.

M&L for finishing wall with texture interior paint of required shade on external old/new wall (Two or more coats applied @ 3.28 ltr/10 sqm) surface over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm all as specified and directed by Engr in charge.

M&L for preparation of newly plastered surface of wall and and applying 2mm thick Acrylic / water proofing wall putty in two coats (each coat not less than 1mm thick ) and surface finished even and smooth with sand paper complete all as specified and directed

Complete removal of of old plastered surfaces of ceiling and applying chalk whiting primer on old plastered surfaces ceiling and applying two coats of white wash all as specified and directed.

M&L two coats of white washing on newly plastered / concrete celling sufaces incuding preparation of surfaces complete all as specified and directed

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each complete all as specified and directed

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed

S&F Second class hard wood plain, solid, straight chawkats and frames, wrought, framed rabated on the solid, rounded or chamfered, put together with glue pinned at joints etc. complete all as specified and directed

S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter with lock rail and panel of 12 mm BWP commerical ply . The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) complete all as specified and directed

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish, complete all as specified and directed

M&L for preparation of old painted surface of wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt complete all as specified and directed

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as directed and specified.

M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified and directed

S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

M&L for cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick complete all as specified and directed

S&F in repair curtain rails 20 mm dia, decorative type, stainless steel including fixing brackets in both sides fancy type complete all as specified and directed..

S&F fabricating coloured powder coated aluminium frame work for door ,windows , ventilators, with one or more rebates sections of approved tint as required for partitions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified

S&F aluminium coloured power coated partition, window , ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws complete all as specified and directed.

S&F in repair aluminium coloured power coated door shutters, aluminium section weighing min 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. .

S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed.

S&F galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

S&F aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.

S&F Framed work such as grills, gratings, guard bars for windows, and ventilators, barred iron work, ladders, framework of water tanks and similar work complete all as specified and directed

S&F factory made 25 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cbm, an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm 2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free, water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws including necessary Locking arrangement complete all as specified and as directed. Note-:(a) Colour/Texture Style of Door/Prelam Sheet shall be approved by GE (b)Test certificate from original Manufactuer shall be provided before incorporation in the work site.

S&F factory made 100% solid WPC (Wood polymer composite) Door frame 90mm X 45mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/borer proof, water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length, all as per specifications drawings as directed by the Engineer-In-charge. Note-:(a)Colour/Texture Style of Door/Prelam Sheet shall be approved by GE (b)Test certificate from original Manufactuer shall be provided before incorporation in the work site.

S&F Veneered decorative 18 mm plywood, grade 1 (with BWR resin) with decorative laminate min 1mm thick on both faces, fixed with screws to timber frame work as in cupboard shelf/partition including taking down the existing structure / board on site complete all as specified and directed Note : Colour and texture of laminate shall be approved by GE.

S&F 18 mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed.

S&F factory made PVC shelf/partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. complete all as specified and directed

S&F stainless steel shelf closing hinges 75 mm size for PVC door shutters complete all as specified and directed

S&F 50 x 15 mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed .

S&F 100 mm size MS mat/glossy finish handle complete all as specfied and directed .

S&F in repair rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position with float valve complete all as specified in SSR part I complete all as specified and as directed.

S&F in repair 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,complete all as specified and as directed.

All as per item No 69.00 above but 20mm bore complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in position exc 500 & n. exc 1000 litres capacity complete all as specified and directed.

S&F in repair CP pillar taps (swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.

S&F CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified.

S&F fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S&F CP toilet paper holder complete all as specified and as directed.

S&F vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed.

S&F health faucet with flexible pipe of 1m length including wall hook for EWC complete all as specified and as directed. complete all as specified and as directed .

S&F in repair vitreous china wash basin white (oval shaped under counter) of size 550 x 400mm including 32mm brass CP waste coupling and waste pipe complete all as specified and as directed .

S&F in repair vitreous china urinal bowl urinal flat back, size of 465x355x265mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal.complete all as specified and as directed

S&F PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed

S&F in repair 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F 40mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and as directed

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting / sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

S&F Plain, galvanised, mild steel sheeting 0.63 mm thickness as in ridges,hips, valley gutters on roof,with grade of zinc coating 275 with all fixing arrangement complete complete all as specified and directed

S&F mild steel hollow ,Joist, channel, angle, tee or tubular Section work in tubular trusses, purlins, rafter, tubular column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and directed

M&L for preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping) etc rough finished surface of concrete complete all as specified and directed

S&F high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed

M&L for RCC M-20 grade concrete (Nominal Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etccomplete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Taking down shuters of any description n exc. 1 sqm each and removing from site complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified and directed.

Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed.

S&F Perforated False ceilling tiles 6 mm thick of calcium cilicate board of siliceous and calcareous mterial in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x38 mm, having 0.25 mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200 mm c/c in both directions using 2.0mm thick pre-straightened GI wire. laying ceiling tiles of approvde make and specification , of size 600mm x 60mm x 6mm all as specified and directed. Make- Saint Gobin False Ceilling, USG Boral, Armstrong or equivalent make as approved by GE.

S&F Aluminium Composite Panel (ACP) of any colour of exterior edge for cladding near entrance of Alucobond/Alstrong/Brand approved equivalent make for external wall / column / canopy cladding in combination of solid / Metallic colours, including all necessary frame work and complete weather sealing. The composite panel should consist of 3mm thermoplastic core of LDPE sandwiched between 2 skins of 0.5mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm. The surface shall be furnished with Lumiflon based flourcarbon coating on top sides and service coating on reverse side. Coatings shall conform to specifications of ECCA /AAMA and conforming to the mechanical properties of panel as per detailed technical specifications. The system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufactures specification and shall withstand a wind pressure complete all as specified and directed.

S&F Mild steel plates (Plain or chequered) as in shoe plate, base plate and gusset plates forming holes for roof frame work, trusses, rafters etc of grade Fe 410 WA. complete all as specified and as directed

S&F 12mm thick Frosted Toughned Glass fixed on patch hinges/pivot for smooth functioning in door shutter including stainless steel handle of 8 inches long and mortice locking arrangement complete all as specified and as directed

S&F stainless steel pipe of 304 Grade in stainless steel railing horizontal or vertical pipes incluing insert in Floor and welded well to SS railing vertical pipes complete all as specified and directed.

S&F precast cement concrete louvers and jallies 50mm thick (measured solid), type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar (1:4) including all moldings but excluding frame complete all as specified and as directed.

M&L for hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for sand cushioning for Machine pressed precast concrete interlocking paver block including watering and consolidation complete all as specified and directed.

S&F 1 mm thick mild steel sheet eaves gutter of dia 150mm, galvanised class 3, half round with rounded edges complete all as specified and directed.

M&L for 25mm thick 2nd class Hardwood to Boarding, supplied & fixed with nails in any situation (except flooring and skirting), Planed one side with butt joints complete all as specified and directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

M&L for rendering 10mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plaster surface of wall and applying 2mm thick cement base wall care putty in two coat (each coat not less than 1mm) over a coat of primer and applying two coats of 1st Quality oil emulsion distember over new prepared surface of wall complete all as specified and directed.

M&L for Bees-wax polishing on wood based surface of any description, width or girth including cleaning and preparing the surface complete all as specified and directed

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including taking down fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets etc. Removing materials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces of walls, floors etc. complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch etc and making good to disturbed surface complete all as specified and directedat site.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.

M&L for point wiring using approved colour coding as as per IS with FR LSH PVC insulated PVC unsheathed electric cable 1100V grade ISI 694 marked down through single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) with GI modular sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates & 1.5 sqmm green FR LSH PVC insulated unsheathed copper conductor as earth wire connected to earth dolly for the following . Make of PVC conduit:- Plaza /Finolex /Polycab /Kalinga /Jindal/ Asian & Make of wire :- Havells /Finolex / HPL or other make as specifed in Particular Specification as approved by GE Make of Modular sunken Box, Modular plate and frame etc - Make as specifed in Particular Specification as approved by GE

(a) One light point controlled by one switch

(b) One ceiling fan/Wall fan point controlled by one switch

(c) One 5amps socket out let point controlled by one switch on same board with other switches.

(d) One 5amps socket out let point on independent board controlled by one switch.

All as per item No 122.00 above but using FR LS PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FR LS PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

All as per item No 122.00 above but using 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 7200 volts grade for geyser point/AC point connecting to metal plug and socket DB including necessary running of 4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S&F Modular Switch flush type 6 Amps single pole, one way complete all as specified and directed.

S&F Modular Switch 16 Amps single pole, one way complete all as specified and directed.

S&F Modular Socket outlet, multi purpose, 2/3 Pin combined 6 Amps flush type complete all as specified and directed.

S&F Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socket complete all as specified and directed.

S&F modular fan regulator step type, 2 module type complete all as specified and directed.

S&F ceiling rose surface bakelite three terminal complete all as specified and directed.

S&F in repair LED ceiling light fittings 34/36 watt recess mounting type 2x2 luminaire, 6000k complete with driver duly connection wire etc complete all as specified and directed. Make Jaguar Cat No. LULT10S036XC / Crompton Cat No. LCTLRN-36-FO-CDL / Bajaj Cat Pt No. BZRSQL 36W GZ1 WH or equivalent in Havells/ Wipro as approved by GE

S&F in repair integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 / Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro/ Crompton as approved by GE.

S&F in repair LED light fitting 2 feet 10 watts, 6500K batten aluminium extruded with end caps complete all as specified and as directed. Make:- Cat No LHEXACP7IN1W010 of Havells or equivalent in Wipro/ Crompton/Bajaj as approved by GE.

S&F in repair LED street light fittings 1x25 /30 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed. Make:- Crompton Cat No. LSTO-25-CDL / Bajaj Cat No. ENXTP30LWHSYPCSD / Havells cat No. LHEXAYP7PN6K030 or equivalent in Wipro as approved by GE. .

M&L for Sub main wiring with two runs of single core FR LSH PVC insulated unsheathed cable 7200 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia in Conduit concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Make of PVC conduit/Casing Caping:- Plaza/Finolex /Polycab /Kalinga /Jindal /Asian Make of wire:- Havells /Finolex / HPL or other make as specifed in Particular Specification as approved by GE NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit including cutting chasing shall be measured as one unit length.

S&F flush mounting factory made Vertical TPN DB, IP-43 Protection -IK 08, with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for TP/FP 100-125 amps G Frame MCCB as incomer and SP/TP MCBs as out going 8 way complete all as specified and directed by Engr-in-Charge.

S&F double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge.

S&F in repair MCCB 4 pole, 415 volts, in the existing panel / location and connection with using aluminum lugs complete all as specified and directed for 125 Amps Adjustable type with breaking capacity 16 KA complete all as specified and directed by Engr-in-Charge.

S&F in repair MCB SPN 6 to 32 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F in repair MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

S&F in repair Single pole and neutral Sheet Metal enclosure with a two pin and earth plug and socket complete with one single pole MCB,20 Amps incl cutting of wall and fixing of AC box in concealed system and making good of disturbed surfaces complete all specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed.

Labour only for refixing the celing fan/ Wall fan/ Exhaust fan obtained from item No 2 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and directed.

M&L for Earthing complete (in replacement) with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with the top edge of the earth plate not less than 1.50m below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No. 3 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C-1 with 40 mm thick RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.50 m from earth plate is deemed to be included in rate quoted.

S&F in repair Wall light fittings suitable for LED bulb 9 watt with & including LED bulb of 9 watt,White or Warm white light as per site requirement including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-Charge. Make :- Havells Cat No. LHFOECE1TZ1B014 or equivalent in Bajaj / Philips /Crompton/Wipro as approved by GE.

S&F in repair LED round light fitting 15W recess mounting type,6000k (White Light /Warm white light as per site requirement) complete with driver duly connection with copper cable etc complete all as specified and directed by Engr-in-Charge. Make, Havells Cat No. LHEBLDP7IN1W015 Bajaj Cat Pt No. BGSLO SLEEK 15W WH RD or equivalent in Crompton/Wipro as approved by GE.

M&L for Sub main wiring with Four runs of single core FR LSH PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LS PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable (Two runs of 6 Sq mm for earth wire) connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Make of PVC conduit:- Plaza/Finolex/Polycab/ Kalinga/Jindal/ Asian Make of wire - Make -Havells /Finolex/ HPL/ Make as per Particulat Specifications NOTE:- Four runs of main copper conductor, two run of earth wire and one run of PVC conduit including cutting chasing shall be measured as one unit length.

S&F double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge.

S&F in repair MCB TPN 40 to 100 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge.

S&F in repair MCB TP 25 to 63 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge.

M&L for Point wiring using approved colour coding as as per IS in repairs with FR LSH PVC insulated PVC unsheathed electric cable 1100V grade ISI 694 marked down through single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall or conduit on wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for the following :- Make of PVC conduit:- Plaza/Finolex/Polycab/Kalinga/ Jindal/ Asian Make of wire - Make -Havells /Finolex/ HPL/ Make as per Particulat Specifications

(a) One light point/fan point controlled by one switch

(b) One 5amps socket out let point controlled by one switch on same board with other switches.

(c) One 5amps socket out let point on independent board controlled by one switch.

S&F switch piano flush button single pole one way 6Amp 240 volt complete as directed.

S&F socket outlet flush type 5 pin, 6 amps, 230 volts complete all as directed.

M&L for Sub main wiring with two runs of single core FR LSH PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia conduit on wall concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LS PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Make of PVC conduit:- Plaza/Finolex/ Polycab/Kalinga/ Jindal/ Asian Make of wire - Make -Havells /Finolex/ HPL/ Make as per Particulat Specifications NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit including cutting chasing shall be measured as one unit length.

S&F double door SPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge.

sunrise enterprises (BID ID -3144286)

sunway associates (BID ID -3137597)