Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST TENDER | |
| 2 | L2₹18.3 L+₹2.1 L (12.8%)Rejected-Finance SAVITRI COMPLEX JIWAJI CHOWK LASHKAR GWALIOR MP 474001 | GWALIOR | GWALIOR | MADHYA PRADESH | 474001 | L2 | Rejected-Finance Not being lowest tender | |
| 3 | L3₹19.3 L+₹3.1 L (19.0%)Rejected-Finance NEAR G E COLLEGE RASHOOLPUR MAHARAJPUR GWALIOR MP 475110 | GWALIOR | MADHYA PRADESH | 475110 | L3 | Rejected-Finance Not being lowest tender | |
| 4 | L4₹19.3 L+₹3.1 L (19.1%)Rejected-Finance | L4 | Rejected-Finance Not being lowest tender | |
| 5 | L5₹19.4 L+₹3.2 L (19.4%)Rejected-Finance | L5 | Rejected-Finance Not being lowest tender |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
27 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TA
GE AF TA GWALIOR-474020
REPAIR/MAINT OF CERTAIN B/R WORKS AT WSA IN TECH AREA AT AF STN GWALIOR
2022_MES_540325_1
8900/1413/GWL/E8
Open Tender
Civil Works
Item Rate
240 days
GE AF TA GWALIOR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF TA GWALIOR
₹50,000
Yes
20 Sept 2022
23 Jul 2022
3 Sept 2022
23 Jul 2022
27 Aug 2022
6 Aug 2022
Amount
M&L for Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.
M&L for Preparation of old decorated surfaces of ceilings including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash complete all as specified and directed.
M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, on wall and applying ONE coats distemper oil emulsion, OVER ONE COAT OF PRIMER etc complete all as approved complete all as specified and directed. .
M&L for applying one coat of external emulsion paint/weather coat, in camouflaging pattern on CCD scheme (Pattern as approved by GE) on surfaces of any type of building, wall, any surfaces, any height, incl preparation of old decorated surfaces complete all as specified and directed. Note- Rate quoted by contractor incl scaffolding and T&P upto 15m height of the building. No extra payment admissible on this account.
Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using 40 mm graded stone aggregate as in Plinth protection and finishing the surface even & smooth without using extra cement complete all as specified and directed.
M & L for 100mm thick cement concrete type B-0. 1:2:4 (20mm graded aggregate) as in FLOOR/HARDSTANDING all as specified and directed.
M& L for forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’
M&L for3 mm thick PVC sheets,laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors
M&L for joint free coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 10 mm thick rendering/ backing coat in CM 1:4 all as specifide and as directed.
Demolition of brick work or stone boulders masonry built in cement mortor or cement lime mortor including all quoins arches pillars etc., but excluding ashlar facing dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.
Description same all as per item No 2 above but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directedby Engr-in-Charge.
Taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick rendering on other than fare face of brick/stone masonry walls in CM 1:6 finished complete all as specified and directed by Engr-in-Charge.
M & L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer, white or tinted as approved complete all as specified and directed. .
Taking down chowkhat or frames (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.
Taking down chowkhat or frames (without taking off shutters from the frame) exc 1.5 Sqm but n'exc 4 Sqm each complete all as specified and directed.
S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded -sealed to the styles & rails with suitable PVC sheet beading,and joint together with solvent cement complete all as specified and directed.
S&F including fabricating of powder coated aluminium frame for door, window, ventilator , partition with one or more rebates including jointing cleats for fixing etc, minimum thickness of powder coating 50 Micron complete all as specified and directed.
S&F 5mm thick tinted glass fixed with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed.
S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C21 complete all as directed and specified
S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as directed and specified
S&F for 150 mm long aluminium handles, cast type, anodised complete all as directed and specified
S&F for 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or csat aluminium alloy complete all as directed and specified
M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F Aluminium (extruded section ) body door closer hydraulically regulated designation No 3, universal type suitable for any type of door shutters complete all as specified and directed.
Taking down existing aluminium doors in any size and in any description with complete fittings and fixture and refixing in the same opening after repairing/servicing/greqasing & adjustment of floor spring etc complete all as specified and directed. Note: Material like snap beading, rubber gasket and glass shall be paid separately
Supply only powder coated aluminium snap beading as approved by GE
Supply only rubber gasket for packing of glass panes as approved by GE
Supply only 5mm thick tinted glass as approved by GE
S&F 100mm brass motrice lock 2 livers, vertical type complete all as specified and directed.
M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismentling of existing Plain or corrugated steel /AC Sheet complete all as specified and directed.
M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Ridge, valley/ gutter fixed with self tapping screws including Dismentling of existing Plain or corrugated steel /AC Sheet complete all as specified and directed.
M&L for MS work for wind ties in roofs including securing bolts and similar work quality conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates using FE 410 W (Gde-E-250 quality A) etc complete all as specified and as directed.
M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using FE 410 W (Gde-E-250 quality A) etc complete all as specified and as directed.
M&L for Steel work in tubular truss including special shaped washer etc complete using ERW or induction butt weld tubes confirming to IS 1161-1998 Grade st 240 FE 410-W gde 250 Quality A
Preparing new steel & iron surfaces of any description over 10cm in width or girth and M&L for applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
Taking down existing steel doors of any description and in any position n exc 10 Sqm in size with complete fittings and fixture and refixing in the same opening after repairing/servicing/greasing & adjustment of hinge/wheel/weilding etc complete all as specified and directed. Note : including materials roller palte etc
M&L for 80 mm thickness Machine pressed precast conctete interlocking paver block any shape and size of M-40 Grade confirming to IS 15658-2006 with grey cement and no pigment complete all as specified and as directed.
M&L for Sand/stone dust filling under floors to receive interlocking paver blocks incl consolidation complete all as specified and as directed.
M&L for 100 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base and finishing the surface even & smooth without using extra cement complete all as specified and directed.
M&L for 5mm thick rendering fare face of brick/stone masonry walls in CM 1:3 finished even and smooth without using extra cement including three coat of white wash complete all as specified and directed.
M&L for 5mm thick rendering on concrete surface on ceilings in CM 1:3 finished even and smooth without using extra cement including three coat of white wash all as specified and directed.
Hacking out old broken glass pane(any thickness),size,quality or description from wooden frames or steel,concrete or brick sorrounds glazed with putty or fixed with beads etc all as specified and as directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and as directed.
S&F in repair galvanised mild steel wire cloth 0.50mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including fixed in repairs complete all as specified and directed.
M&L for Rough excavation not exceeding 1.5M deep and getting out soft/loose soil complete all as specified and as directed.
Removing excavated material exc 1.5 KM but n;exc 5KM and depositing where directed.
Forming embankments and traverses including raising(or lowering) earth,spreding in layers n:exc 30 cm thick , watering,ramming/rolling and finishing to required size,shape,etc n, exc 6.00 M high from base complete all as specified and directed.
Cutting of all bushes ,grass and sarcandas, shrubs, vegetation etc including trees n'exc 30 cm girth and removing the material exc 500m and n exc 1 KM complete all as specified and directed.
Removal of existing roof treatment (screed plaster, & tarfelt of any description) and removing to a distance exc. 500 m and n.exc. 5 Km from site complete all as specified and directed.
M & L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching,kerbs and levelling course etc over roof surface complete all as specified and as directed
Supply only liquid water proofing compound complete all as specified and directed.
M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ") over roof top surface finished even and smooth using extra cement and application of water proofing treatment using APP modified roof membrane over existing inaccessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 litre / Sqm manufactured by the same agency as that of APP membrane with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Applying hot blown grade bituminen 85/25 @ 1.2 Kg/Sq M over primer. (d) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap.
S&F in repair for 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed.
S&F rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified of 500 Ltr capacity including float valve 20mm dia including dismantling of old water tanks complete all as specified and directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde E- 250) quality- A
M&L for Cutting holes into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l Exc 400 sq. cm bur n exc 1000 sqcm as required including providing PCC Band at each cutting holes
vikas traders
M/s Kishan Construction Company
M/s Manish Contractor
YASH DEVELOPERS AND CONSTRUCTION COMPANY
lodhi builders
M/s Subhash Construction Co.
M/S LAKSHYA CONSTRUCTIONS
M/S M.D. CONSTRUCTION .CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .