Janpad Farrukhabad esthith Rajkiya Awasiya Officers Colony Ke Type-3 Awas Sankya-1 2 3 4 5 6 7 8 9 10 11 Awam 12 tak Awaso me Punarvidhuitikaran ka Karya.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable G.I. box & earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A

Wiring for twin control light with 1.5 Sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable G.I. box & earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 x 4 sq. mm earth wire

2 X 6 sq. mm + 1 x 6 sq. mm earth wire

2 X 16 sq. mm + 1 x 6 sq. mm earth wire

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.

100 mm X 100 mm X 60 mm deep

180 mm X 100 mm X 60 mm deep

200 mm X 250 mm X 60 mm deep

Supplying and fixing of suitable size G.I. box with modular plate and cover in front on surface or in racess, including providing & fixing 3 pin 5/6 Amp. modular socket outlet & 5/6 Amp. modular switch, connections etc. as required.

Supplying and fixing of suitable size G.I. box with modular plate and cover in front on surface or in racess, including providing & fixing 6 pin 15/16 Amp. modular socket outlet & 15/16 Amp. modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A celling rose on the existing junction box/wooden block including connection etc. as required.

Supplying and fixing brass batten / angle holder including connection etc. as required.

Installation, Testing, Commissioning of wall bracket / celling fittings of all sizes and shapes contaning upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connection etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way, Double door

12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Double Pole

Supplying and fixing single pole blanking plate in the existion MCB DB Complete etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing Cable End Box (Loose wire box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required.

for 8 way, Double door SPN MCB DB

for 10 way, Double door SPN MCB DB

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required(For inverter wiring).

1 X 1.5 sq. mm

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5°C to 40°C, internal surge protection of 2. 5 KV with Short & Open circuit protection, THD < 10%, P. F>0. 95, IP20, CRI >80, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1. 5 sq. mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm) 18- 22 watt

Supply & fixing of water tight oblong 10 watt LED Bulkhead luminaire having pressure die cast housing with driver set confirming to IP65 and above protection, IK 08, High purity /transmisivity UV Stabilized Non yellowish diffuser/ for uniform light distribution, detachable driver set, open and short circuit protection, suitable for 24 Hr Continuous Operation, Complete in all respect. compelete in all respect. CAT-AAA 1200 system lumens, >120 Lm/W, PF>0.95, CRI >70, >300V over voltage protection, 4 KV internal Surge Protection, metal housing with 5 years warrantee

Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0. 9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1. 5 sq. mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 1200mm, service value = 6. 0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)

Supply of Heavy Duty Exhaust Fan 300 mm. sweep 900 RPM complete in all respect.Havells or Eq.

Supply of Metallic body fresh air fan 230 mm. sweep complete in all respect. Havells or Eq.

Supply and fixing of 7 Watt LED Bulb. Havells or Eq.

Supply and fixing of Wall Bracket light with glass, diffuser suitable for 7.5/9 W LED. Havells or Eq.

Supply and fixing of DP Sheet Steel enclosure Busbar, Neutral link, Earthbar and Din Rail Make:-Legrand or Eq.

Supply and fixing of 80 Amp. DP MCB (10 KA) C-Series Havells or Eq.

Dismantalling Old wiring, D.B. Main switch etc.

Cost of 01 No. Residence

Cost of 12 No. Residence

Note :- G.S.T. @ 18% Extra

Please Enable Macros to View BoQ information