Providing and fitting of main switch, MCCB for unit I and repair to priming motor and foot valves of all the unit along with allied works at LIS Gidder Gallian (Shergarh).

Amount

Repair to foot valves of 8” dia at site by way of dismantling chocked foot valve by way of unscrewing/cutting the rusted nuts and bolts from suction pipe in the canal. Dragging out the foot valve from the canal with the help of ropes, tools, tackles and manual laour. Dismantling of foot valve and replacing the leather seals, rubber sheet, for flanges with required nuts and bolts. Fitting the same to suction pipe in the canal with the help of skilled and semi-skilled labour. Complete job includes cost of material, labour charges and testing at LIS Giddar Gallian (Shergarh) of all the three unit.

Complete rewinding of 2HP priming motor by way of extracting out old damaged copper coils. Cleaning the slots with appropriate chemical along with stator. Rewinding of motor with new copper coil of requisite gauge. Insulation & varnishing complete. P/F of 2nos. bearing equivalent to both DE & NDE as per sample. Also P/F of 2inch dia foot valves to suction line after extracting out old damaged one. Complete job includes cost of material, dismantling, carriage (to & fro) fitment and testing charges at LIS Giddar Gallian (Shergarh).

P/F of 200amp main switch HRC type along with suitable angle frame of MS angle with 04 no. cross arms duly grouted to the wall with PCC after extracting out the old damaged one. The job involves fixing of main switch on the angle frame by drilling holes on MS frame & p/f new fasteners/ required nuts and bolts. Giving all the incoming and outgoing electrical connection by p/f of thimble of appropriate rating/sizes and insulation complete at LIS Giddar Gallian (Shergarh). Complete job includes cost of material, fitment charges at site. Make of main switch- Havells, L&T, Anchor or ISI equivalent.

P/F of 63 amp MCCB for unit No 1 on the wooden board by way of drilling hole and fixing it by p/f of nuts and bolts of required size with gang box or other fixtures required. The job involves giving the electrical connection by p/f of 10 sq. mm copper wire 9mtrs- three lengths of 3 mtr each along with thimbles of appropriate rating/sizes and insulation complete. The job includes cost of material and fitment charge at LIS Giddar Gallian (Shergarh). Make of main switch- Havells, L&T, Anchor, C&S or ISI equivalent.

Rebate on Old Parts

PERFECT ELECTRICAL WORKS

M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS

G S ENGINEERING WORKS