VILLAGE INNA BAJWA BLOCK SHERPUR DISTRICT SANGRUR UNDER PRWSSIP SUB-COMPONENT 2Ai and JJM

Amount

Component -1

Column pipe (G.I.) 100 mm i/d = 55 mtr.

Repair of Pump Chamber

White washing scraping inside of Pump Chamber.

Scraping of snowcem robbiacem etc.

White washing 2 coat inside of Pump Chamber.

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. on old work one coat to give even shade.

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint.

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.

Distempering with dry distemper of approved manufacture one coat on old distempered work.

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting one coat with aluminum paint on old work to give an even shade.

Wrought iron and mild steel grills (made of 20 wide and 6mm thick flat Windows Horizontal Total Flat 35mm×6mm

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.

Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Repair of tile terracing complete in all respects.

Repair of electric fitting complete in all respects.

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent.

Providing and fixing of electric tube set of reputed make.

Repair of OHSR

Repair of Expansion Joint. Size 150 mm i/d complete in all respects.

P/F OHSR Jali complete in all respects.

Repair of vertical tank wall inlcuding scraping & plastering complete in all respects.

Repair of sluice valve chamber size 0.9 x 0.9 complete in all respects.

Repair of over flow haudi complete in all respects.

Painting of OHSR pipes including cost of labour & material complete in all respects.

Painting of OHSR stair case railing and pickets including cost of labour & material complete in all respects.

Conglomerate floor 40mm cement concrete topping 1:2:4 for plinth protection.

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects.

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7.

Construction of Cement Concrete, Foot Path with precast curve & earth filling inside water works as per standard Drawing D-10.

Repair of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects.

Repair of Main gate pillar complete in all respects.

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Repair and minor Replacement of existing pipe line

Provision for making new connection with exit pipe line as per analysis A-20 complete in all respects.

Hand boring Horizontally for crossing of pipe under road or any other obstacle by using Auger/Bocki method. Including excavation, stringing and jointing of pipe upto 160 mm complete.

Automated water controller switch to start or stop the pump based on water reservoir level complete in all respects.

Improvement in exisitng connections

Repair of old house connections complete in all respects.

Component -2

Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground, 15mm i/d G.I. Union & ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Component -3

Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width included excavation.

PVC pipe 63mm o/d 6Kg/sqcm

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63 mm o/d

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground, 15mm i/d G.I. union & ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Painting on Board both sides including priming coat, printing & Map as per Water Supply & Sanitaton standard.

Cost of Component-4 (Operation and maintenance)

Provision for sodium chloride for disinfection of water Complete in all respect.

Credit of old column pipe (-)