Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹17.2 L
EMD Value
₹34,344
Closing Date
25 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Avionics Division, Hyderabad
Avionics Division, Hyderabad
Electrical works for up gradation of North gate reception room, Security room etc in HAL factory area
9468
HAL/HD/MT/RT/24-25/10
Works
Accessories Complex- Avionics Divn-Hyderabad-Plant Maintenance
₹0
₹34,344
25 Sept 2024
4 Sept 2024
4 Sept 2024
25 Sept 2024
REMOVAL OF ITEMS: Removal, Dismantling, Shifting & Handing over of Cable terminations, PVC / MS conduit pipes with wiring, Cables, Switch Boards, Switch Socket Boards, Tube light fittings with down rods etc. as per the direction of in charge engineer. The removal and shifting shall be done for above materials with all accessories complete.
MCCB / MCB DISTRIBUTION BOARD Supply, Installation, testing and commissioning of the following factory made MCB / MCCB Distribution Boards (Double door type) IP-54 Cubicle / Enclosure made of 1.6 mm thick CRCA sheet steel, powder coated with approved shade and partitions to segregate phases with suitable 2 Nos of top & bottom cable entry end boxes. The DBs & Cable entry end boxes shall be mounted recessed / surface mounted on wall with suitable iron angle frame & all fixing accessories as per site and inter connection with number sleeves & crimping lugs complete. The rate shall include supply & fixing of 2 Nos (top & bottom) cable end boxes suitable for following DBs.make: Legrand POWER DB 12-Way TPN MCCB DB Incomer:. 1 No,160 A 4POLE (Icu=36 Ka) MCCB Out going: 06 Nos, 63 A ( Type 'C') TP MCB 06Nos, 32 A ( Type 'C') TP MCB
LT CABLING: Supply & laying of 3.5 core x 95 SQMM Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex
Lighting DB:Supply, Installation, following factory made 8 way TPN MCB Distribution board of dust protected,powder coated, inclusive of 200A tinned copper busbar,common neutral link,earth bar,and din bar for mounting MCBs. The Enclosure shall be made of 1.6 mm thick CRCA Sheet Steel powder coated with approved shade and partition to segregate phase with covers & mounting concealed on wall with suitable angle iron frame & grouting fixtures, anchor bolts & nuts with inter connections complete.8 way TP & N MCB DB with encloser double door type Incomer 63 Amps 4PMCB - 1 No Outgoing: 32A 4P MCB-1No, 16 Amp SP MCB - 8 Nos Make:Legrand, seimens
LT CABLING: Supply & laying of 3.5 core x 50 SQMM Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. scope includes cable end terminations with suitable glands. Make: Gloster/ Polycab / Finolex. Scope includes cable end terminations and as directed by EIC
MCB ENCLOUSER: Supply fixing, testing and proving of 4 pole 32A rated industrial MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T
MCB ENCLOUSER: Supply fixing, testing and proving of 4 pole 63A rated industrial MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T
Supply & fixing of following light points etc with 2 runs of 1.5 sq. mm FRLS PVC insulated flexible copper conductor 1.1kV grade concealed suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including supply & fixing of 10 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall and inter connection complete. Make: Havells / fincab / Finolex 2 Light points controlled by one switch 10 A modular type SP switch Make: Legrand/Siemens/L&T/GE.
Supply & fixing of following light points etc with 2 runs of 1.5 sq. mm FRLS PVC insulated flexible copper conductor 1.1kV grade concealed suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including supply & fixing of 16 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall and inter connection complete. Make: Havells / fincab / Finolex 1 Fan Point Controlled with 1No 10 A modular type SP switch with electronic Regulator Make: Legrand/Siemens/L&T/GE.
Providing of Independent Modular Sockets & Switches: Supply and fixing of following items with 2 mm thick GI modular box independent concealed in the wall with inter connection complete. 3 No, 6 Amp 3/2 pin multiple universal socket controlled one no.16 Amp switch & 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch and 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch. Make: Legrand/Siemens for 230V Supply
PROVIDING OF MODULAR TYPE IN-DEPENDENT SWITCHES & SOCKETS: Supply and fixing of 2 Nos 6/16 amps 3 pin multiple socket controlled by 2 No. 6/16 amps SP MODULAR switch of approved quality, color & design shall be mounted on suitable cover plate with suitable MS box with inter connection complete as per site requrement.The box shall be mounted on concelled/ surface of wall / floor with all requred ccessories as per site condition. Make:Legrand / Crabtree
POWER WIRING: Providing and laying of 2 runs of 2.5 sq mm and 1 runs of 1.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Polycab/Havells/Finolex only)
POWER WIRING: Providing and laying of 4 runs of 4.0 sq mm and 2 runs of 2.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T
BLDC ceiling fans: Supply and provisioning of BLDC ceiling fans, 1200mm sweep,5 star rated on existing roof with all fixing accessories as directed by EIC. Make: Crompton / Havells / Orient / Usha / Atomberg
PROVIDING OF LED LIGHT LUMINAIRE: Supply & Fixing of 4 feet 2*20 Watt, Industrial batten with two numbers Industrial LED Tube lights on wall with necessary accessories. make : Philips/Wipro/CGL / / FA /Havells / Bajaj
Providing of LED Light Fixtures: Supply, installation, testing & commissioning of Recessed Mounted 2 X 2 ft (36-40) watt LED Full out put Luminaries with CRCA power coated With high diffuser efficiency of 3600 lumens with necessary fixing accessories as per site & inter-connection complete Make: philips / CGL / Wipro / FA /Havells / Bajaj
COPPER PLATE EARTHING:Making Earth pit complete with copper plate 60 cm x 60 cm x 3.15 mm thick electrode and 25 mmx3 mm copper strip. Copper plate is to be buried directly in ground with top edge of the plate not less than 3.0 metres below normal ground level. Copper strip to be bolted with the earth plate at three points by means of copper bolts, nuts, check nuts and washers. Earth strip to be extended upto earth test point in earth chamber at ground level. Scope of work includes excavation of earth & refilling, drilling hole to electrodes, supply and covering the earth plate with alternate layer of salt and charcoal (not less than 15.0 cm on both side of plate), PCC pit and CI cover, Funnel with watering pipe, wire mesh and copper lugs etc as specified, GI protection pipe of size as specified for protection of earthing lead from top of earth plate upto earth chamber, laying copper strip of length of 5.0 mtrs connecting from test point to mainswitch or switch board or equipment and any other work necessary to complete making earth pit in all respect. Note: Earth resistance to be achived 0.5 ohms by connecting all eartpits as grid as directed by EIC
EARTH STRIP:Supply & laying of 25 mm x 5 mm Copper Strip on porciline insulators clamped to walls at distance of one meter or on cable trays, run in pipes, run underground etc., as required including interconnection between the earth stations etc., complete as required conforming to IS: 3043-1987. Scope of work includes supply of calmping materials necessary to complete work in all respect as per direction of EIC.
HAL/HD/MT/RT/24-25/10
HAL/HD/MT/RT/24-25/10
Electrical works for upgradation of North gate reception room, security room, misc. Works in fabrication hanger in HAL factory area
Description
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
GST NO.:
PAN No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.
TURN OVER IN Rupees
Pls Enter Turn over in Rs. for all the 3 years
ESI & PF Nos with proof (If any)
Related Document to be Uploaded to e-Procurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
80% (One Work)
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
Pls Accept The Delarication
DECLARATION II
Pls Accept the Delaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TBMT10.pdf
TENDER_DOCUMENT • 1.92 MB
ChecklistofDocuments.pdf
TENDER_DOCUMENT • 0.02 MB
NITCT10.pdf
TENDER_DOCUMENT • 0.30 MB
ProformaB.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureL.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureIIC.pdf
TENDER_DOCUMENT • 0.01 MB
EFTmandateform.pdf
TENDER_DOCUMENT • 0.01 MB
coveringletterEMD.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureIIB.pdf
TENDER_DOCUMENT • 0.01 MB
PriceBidRT10.xlsm
TENDER_DOCUMENT • 0.07 MB
AnnexureI.pdf
TENDER_DOCUMENT • 0.01 MB
ProformaA.pdf
TENDER_DOCUMENT • 0.01 MB
PQRT10.xlsm
TENDER_DOCUMENT • 0.03 MB
PROCESSDOCUMENTFORSBICOLLECT.pdf
TENDER_DOCUMENT • 1.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .