REPAIR OF SEWAGE TREATMENT PLANTS, LINES AND TIMER STREET LIGHTS, STREET LIGHTS AT ATS BELAGAVI UNDER GE(AF) SAMBRA

Amount

M&L for duct pipe of double wall, corrugated HDPE 40 mm dia outer dia, confirming to IS:14930 (Part-II) of approved colour with fittings for cable protection complete all as specified and as directed.

Taking down/out unserviceable UG cables of any cross sectional area and connections including Bricks, GI pipes etc of any descriptions, laid in trenches and/or fixing with walls/poles including segregating of serviceable materials viz Bricks, cables, GI Pipes etc complete all as specified and as directed.

Supply and laying or fixing or passing through pipe including testing and commissioning of 1100 volts grade "Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 16 sqmm nominal cross sectional area 4 core confirming to IS specification complete all as specified and directed

Supply and laying or fixing or passing through pipe including testing and commisioning XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 06 sqmm 2 core including Brass compression cable gland, terminal lug etc and tesing completed all as specified and as directed..

M&L for LT cable two core PVC insulated, PVC sheathed multi stranded copper conductor size 1.5 Sqmm for security light complete all as specified and directed .

S & F in repair thermo plastic cable Junction box of size 300x200x105mm suitable for cable IP 65 protection including single phase and neutral aluminium bus bar with 10 amp MCB with metric knockout for cable entry incl MS clamp of size 25x3mm, incl 3 nos HDPE gland fixed on pole with clamp nuts, bolts etc complete all as specified and directed

Taking down worn out, old, unservicable light fitting of any desciption complete all as specified and directed

S & F street light Luminaires 30 watt fitting New generation, (Nexus+) aesthetically designed for road lighting, having secondary optics with uniform distribution of light having pressure die cast aluminium housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage 120 to 270 V 100 Lum/W complete all as specified and directed

S & F street light Luminaires 60 watt fitting New generation, (Nexus+) aesthetically designed for road lighting, having secondary optics with uniform distribution of light having pressure die cast aluminium housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage 120 to 270 V 100 Lum/W complete all as specified and directed

S & F street light Luminaires 45 watt fitting New generation, (Nexus+) aesthetically designed for road lighting, having secondary optics with uniform distribution of light having pressure die cast aluminium housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage 120 to 270 V 100 Lum/W complete all as specified and directed

S & F street light Luminaires 90 watt fitting New generation, (Hawk) aerodynamically designed with better thermal management for road lighting, having pressure die cast aluminium housing powder coated in graphite grey and toughened glass, IP 66 protection, class I with operating voltage 120 to 270 V 100 Lum/W complete all as specified and directed

S & F LED Post top/ Gate light Aluminum dia cast with modern artistic design and white PC diffuser suitable for retrofit led lamps 1x7.5watt , 360 indirect light including fixing with suitable size GI pipe as require on the top of the gate pillor, control by two way SP DB with suitable MCBs as per direction and wiring complete 100 Lum/W complete all as specified and directed. Make:Havells model No-1N X A60 7.5 W LED FILAMENT LAMP or equivalent make as specified in list of makes of Particular Specifications

S & F Garden light/Bollard light 10 W pressure die casted powder coated housing with IP 66 prectection 100 Lum/W and driver ,including PCC(1:2:4) plate form 30cmx30cmx30cm complete all as specified and directed.. Make:- Crompton Cat Part No. LBLA3-10-CDL or equivalent make as specified in list of makes of Particular Specifications

S & F Flood light made up of pressure die casted aluminium housing with toughned glass and high power LED 120 W with IP 66 protection 100 Lum/W complete all as specified and directed.. Make: Crompton/Phillips/ Havells/Bajaj or equivalent make as specified in list of makes of Particular Specifications

S & F Flood light made up of pressure die casted aluminium housing with toughned glass and high power LED 200 W with IP 66 protection 100 Lum/W complete all as specified and directed. Make: Crompton/Phillips/ Havells/Bajaj or equivalent make as specified in list of makes of Particular Specifications

S&F in replacement street light bracket fabricated made out of GI tubing light grade 40 mm bore bent to the shape as directed of length not less than 1.0 mtr complete with mounting mild steel clamps of flat iron size 40x5 mm of suitable length- 02 Nos including nut & bolts of suitable size complete all as specified and directed.

S&F GI Tubing light grade ISI marked including all fititngs laid in trenches/fixed on wall of size 40 mm bore complete all as specified and directed.

S&F including testing & commisioning time switch panel box size 400mmX350mmX170mm dust and vermin proof made of 16 gauge MS sheet factory made duly painted with two coats of synthetic enamel paint recommended colour over a coat of red oxide primer and mounted inside the following . (a) MCB triple pole 32 Amps 230 volt -01 No (b) Analog electro mechanical time switch 24 hours with minimum setting 30 minutes for daily working contact rating 16 Amps, 240 volts, AC with intial charging battery backup having supply and resere failure upto 150 Amps hours and coil voltage 415 volts. (c) AC contactor, 3 pole, ML-2,415 volts, 50Hz (d) internal wiring with pvc insulating stranded copper conductor of suitable size and making electric connection -01 No (e) By pass MCB single pole, 32/40 Amps, volts -01No Note : - Time switch pannel box shall be fixed on one pole/wall in feeder piller box flat iron clamp 40X6 mm or other suitable fixing arrangement

S&F LED driver of 45 Watts as per existing LED street light make and re-fixing the same at the same pole after making functional including taking down old/burnt LED street light driver complete all as specified and directed. from from pole

All as per Srl item No.19 above but LED street light 60 Watt

All as per Srl item No.19 above but LED street light 90 Watt

All as per Srl item No.19 above but LED flood light 120 Watt

All as per Srl item No.19 above but LED flood light 200 Watt

All as per Srl item No.19 above but LED Gate light 30/40 Watt

S&F in replacement LED bulb9/12W 230V on Garden light pole with holder complete all as specified and directed. Make- Havells,/Crompton/Phillips or equivalent make as specified in list of makes of Particular Specifications

Taking down carefully unserviceable Garden light/Street liight/Security light/High Mast light fitting from pole/Structure and repair/replacement of worn out parts and carbon cleaning of fittings,cover,copper wire/aluminium wire,clamps ,nuts and bolts, mounting bracket and re assembling the same after repair, testing and refixing in pole/other location and repairing of cable /junction box / timer / contract L1 &L2 /MCB SPN/service wire including provision of necessery T & P like ladder/Boom Vehicle, tools ets as required complete all as specified and directed

Taking down carefully unserviceable High Mast light fitting through lowering device from pole/Structure and repair/replacement of worn out parts and clean lowering device, apply the grease or lubricate to lowering device including testing lowering devices and fully operate to fully down position, serviceing the mechanical device (winch), checking the oil level in gear box before operating winch and fill the gear oil (oil SAE 140 grade), Motor chains and sprockets should neither be too loose nor too tight, repair/fitting the high mast pole door compeletly functioning, checking all elements of the electrical system, checking pole cable insulation and connections for rust and cracks, removing unwanted elements such as bird nests, debris from around and inside the light pole; removing critter guard, debris and restore critter guard; Mow, weed remove and tree trim as required; remove any soil buildup from around the pole and cleaning of fittings/replace of high mast/ flood light and, fuse holders, photocells, ballasts, and other work required to keep the lights operational, proper connected/fitting copper wire/aluminium wire,clamps ,nuts and bolts at lower ring and re assembling the same after repair,testing and reposition in high mast pole/other location including provision of necessery T & P like ladder/Boom Vehicle, tools ets as required and refixing of high mast light complete all as specefied directed by Engineer-in-Charge.

M&L for PCC 1:2:4, type B-1 (using 20 mm graded stone aggregates) as in coping for old and new poles including form work and finishing the surface with cement mortar 1:4, 15mm thick finished to the portion of PCC muffs above ground level complete all as specified and as directed

S&F MCB SPN 240 volts 6 to 32 Amps breaking capacity 10 KA 'C' Series rating complete all as specified and directed.

M&Lfor earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using GI wire 4mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected up to main DB/LT Panel /Test point and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of MES SSR 2009(Part-I) complete all as specified and directed.

M&L for preparation of old painted steel surface of LT poles and applying two coats of aluminium paint approx 6 mtr height on outer surfaces of pole from 1.5 m above the couping/ground level up to the top of steel poles including painting of MS cross arms, clamps, nuts and bolts etc and painting alternative black and yellow strips of 30 CM height with two coats of synthetic enamel paint up to 1.5 mtr height from the ground/couping level including writing pole No. with letters of size 25 mm height on pole/ plate with Black synthetic enamelled paint complete all as specified and as directed

M&L for road cutting by manually including making good the disturbed portion after the completion of work with PCC 1:2:4, type B2 on top not less than 150 mm thick including levelling and cambering according to existing road surface, refilling, watering, ramming etc complrtr all as specified and as directed.

Cutting and trtmming of tree branches to clear the over head lines in the arc of lt over head lines (including repairing and jointing of ACSR Conductor if damaged during cutting of tree) and removing of the trimmed branches of trees,removing and depositing the same away from the site complete all as specified and directed. Note:-(i) All tools and ladder required for the job should be arranged by the the contractor with the over all cost quoted in the item rate. (ii) Pole to pole distance shall be measured as one span.

M&L for preparing old plstered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including necessary preparation of surfaces complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment and necessary preparation of surfaces and applying two coats of Acrylic distemper over a coat of primer on walls, pillasters, cornices etc. including applying 3mm thk wall care putty over old surfaces complete all as specified and asd directed.

M&L for complete removal of existing treatment and necessary preparation of surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance, exterior weather proof paint of required shed (Company Depot tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exteror primer applied @ 0.90 litre / 10 sqm on walls, pillasters, cornices, drops, chaiias etc. complete all as specified and as directed.

M&L for testing of treated sewage water once in every month by sending the treated water samples to the authorized NABL accredited lab and collection & submitting the results to Engineer-in-charge and displayed on the board at STP all as specified & directed. The Result shall be comply the following parameters :- (a) PH :6.5-8.5 (KSPCB Limit) (b) BOD at 20 Degree C - <10mgL (c) COD -150mg/L Turbidity : 5 NTU Maximum (KSPCB Limit) (d) Total Suspended solids : 30 mg/L Maximum (KSPCB Limit) (e) Residual chlorine : 1.0 mg/L Maximum (KSPCB Limit) (f) E. Coli : Nil CFU (KSPCB Limit)

M&L for Poly Aluminium Chloride (PAC) for Water Treatment at Swimming Pool, STP South & North complete all as specified and directed. Note : (i) Tenderer shall employ suitable employee to mix chemical to water daily 10 to 15 kg as per requirement. (ii) Tenderer shall keep/maintain minimum 15days stock of chemical.

Taking out the unserviceable /out lived/chocked HDPE/ UPVC water tubing of following sizes from trenches/wall/ceiling/floors complete all as specified and directed:-

150 mm dia Pipes

100/110 mm dia Pipes

50/40mm dia Pipes

32 mm dia Pipes

Supplying and laying 32mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 in trenches incl all fittings complete all as specified and directed

Supplying and laying 50mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 in trenches incl all fittings complete all as specified and directed

Supplying and laying 100mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 in trenches incl all fittings complete all as specified and directed

Supplying and laying 150mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 in trenches incl all fittings complete all as specified and directed

Excavation in trenches not exceeding 1.5m depth for laying pipes and getting out in hard / dense soil for laying cable/erecting poles complete all as specified and directed.

Returning and filling in soil including spreading leveling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

BHARAT ENGINEERS & CONTRACTORS (BID ID -3487348)