Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAdmitted-Finance | ₹1.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.2 Cr+₹4.1 L (3.46%)Admitted-Finance | ₹1.2 Cr+₹4.1 L (3.46%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | GANESHGARHIA CONSTRUCTION COMPANY L1 | M/s SURENDER KUMAR BANSAL L2 |
|---|---|---|---|---|---|
| 1.00 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to require slope and compacted by vibratory roller 8 - 10 Tonne to meet requirement of Table 300-2 as per MoRTH specification Vth revision Clause No. 305 | 7,000 | Cum | - | - |
| 2.00 | Construction of granular sub-base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per clause 401 : For Grading-V Material as per MoRTH Specification Vth revision | 1,500 | Cum | - | - |
| 3.00 | Providing and applying tack coat on the prepared surface, with bitumen emulsion as per IS : 8887 & manufacturer’s specifications @ 2.5 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Vth revision Clause 503 & 112 (Including cleaning of bituminous road surface) | 24,500 | Sqm | - | - |
| 4.00 | Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-17 for wearing course including loading of aggregate with front end loader and hot mixing of binder (including cost of anti-striping compound, wherever required) and 3% cement filler with aggregates in hot mix plant 100-120 TPH Trasporting the mix material with tipper and laying with sensor paver finisher ( as per clause 507.3.5) to the required level, grades and rolling with vibratory compactor and pneumatic tyred roller 15-250 KN=0.7 Mpa, to achieve the desired density (approved by department) excluding cost of primer/tack coat (MoRTH Soecification Vth revision:Clause-503 & 112)
Grading-II (13.2 mm Nominal size)- Bitumen (VG-40) @ 5.4% of mix & thicness 30-40 mm with all lead of mix material | 980 | Cum | - | - |
| 5.00 | Thermoplastic pavement marking with hot applied thermoplastic materials for road markings with surface application of glass beads at specified rate complete as per drawing, Technical Specification Clause 803 and as directed by the Engineer. Thermoplastic marking with material conforming to Clause 803.4 of MoRTH having TiO2 (for white) minimum 10% and softening point 102.5 ±9.5°C
(a) Lane, Centreline, Edge ,pedestrian crossing markings and other marking along strips for 2.5 mm thickness of marking(excluding drop on glass beads) | 200 | Sqm | - | - |
| 6.00 | Milling of the existing bituminous surface using Milling Machine inclucive cleaning and broming with power broomer, air compressor & manpowerv complete traffic management, disposal of milled material as instructed by the engineer (upto 50 mm thick) including disposal and salvage of material | 24,500 | Sq.m | - | - |
Tender Value
₹1.5 Cr
EMD Value
₹2.9 L
Closing Date
23 Mar 2020, 6:00 pmClosed
Director
First Floor, LIC Jeevan Nidhi Building, Near Ambedkar Circle, Bhawani Singh Road, Jaipur
Major Maintenance Works on Arjunsar-Pallu road in Rajasthan
2020_RIDCO_180301_2
NIT618
Open Tender
Civil Works
Item Rate
180 days
As per bid document
Please refer Tender documents.
2 documents required · 2 mandatory
₹29,500
RIDCOR Ltd.
₹2.9 L
6 Apr 2020
11 Mar 2020
24 Mar 2020
11 Mar 2020
23 Mar 2020
11 Mar 2020
Amount
Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to require slope and compacted by vibratory roller 8 - 10 Tonne to meet requirement of Table 300-2 as per MoRTH specification Vth revision Clause No. 305
Construction of granular sub-base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per clause 401 : For Grading-V Material as per MoRTH Specification Vth revision
Providing and applying tack coat on the prepared surface, with bitumen emulsion as per IS : 8887 & manufacturer’s specifications @ 2.5 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Vth revision Clause 503 & 112 (Including cleaning of bituminous road surface)
Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-17 for wearing course including loading of aggregate with front end loader and hot mixing of binder (including cost of anti-striping compound, wherever required) and 3% cement filler with aggregates in hot mix plant 100-120 TPH Trasporting the mix material with tipper and laying with sensor paver finisher ( as per clause 507.3.5) to the required level, grades and rolling with vibratory compactor and pneumatic tyred roller 15-250 KN=0.7 Mpa, to achieve the desired density (approved by department) excluding cost of primer/tack coat (MoRTH Soecification Vth revision:Clause-503 & 112) Grading-II (13.2 mm Nominal size)- Bitumen (VG-40) @ 5.4% of mix & thicness 30-40 mm with all lead of mix material
Thermoplastic pavement marking with hot applied thermoplastic materials for road markings with surface application of glass beads at specified rate complete as per drawing, Technical Specification Clause 803 and as directed by the Engineer. Thermoplastic marking with material conforming to Clause 803.4 of MoRTH having TiO2 (for white) minimum 10% and softening point 102.5 ±9.5°C (a) Lane, Centreline, Edge ,pedestrian crossing markings and other marking along strips for 2.5 mm thickness of marking(excluding drop on glass beads)
Milling of the existing bituminous surface using Milling Machine inclucive cleaning and broming with power broomer, air compressor & manpowerv complete traffic management, disposal of milled material as instructed by the engineer (upto 50 mm thick) including disposal and salvage of material
M/s SURENDER KUMAR BANSAL
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.03 MB
Tender_MM_AP_Mar20.pdf
Tender Documents • 5.09 MB
BOQ_318732.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .