CA NO.CWE BLY/ GE (E) /57 OF 2026-27SPECIAL REPAIR TO ROAD BERM IN FRONT OF STN HQ TO SEC HOSP APPROX 450 MTRS AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY

Demolition brick (laid flat or edge) or brick tiles in floors, channels, kerbs, aprons, etc, (each layer) complete all as specified and as directed.

M&L for brick work with sub class ‘B’ brick old size straight or curved on plan exc 6 Mtr mean radius built in CM (1:4) as in culvert/ road berm complete all as specified and directed.

M&L for 15 mm thick rednering in CM 1:4 on concrete or brick work surfaces using water proofing compound @ 3% by weight of cement complete all as specified and directed.

M&L for applying two coats synthetic enamal paint painting of required shade over a coat of cement primer and a coat of putty including preparation of newly surfaces complete all as specified and dieacted.

M&L for 75 mm thick cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments in floors over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.