PROVN OF BIRD NET ,ADDI/ALT OF OFFICE COMPLEX AT COO HANGER, TOOL CRIB ,OFFICE COMPLEX INSIDE OF 121 HF, SPECIAL REPAIR TO TOILETS AND EXTERNAL INTERNAL W/S SYSTEM AT OPS COMPLEX AND CERTAIN MW INSIDE AIRPORT AREA AT AFS MUMBAI UNDER GE AF THANE

Amount

Dismantling of brick work or stone/boulder built in lime mortar or cement mortar including all quins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in Soft / loose soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil.

Returning, filling including spreading leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed by Engineer-in-charge.

Excavation in post holes (or similar holes) in hard dense soil, each n exc 0.50 cum , getting out returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.

M&L for PCC 1:3:6 Type C2 (using 40 mm graded stone aggregate) in post, foundation, filling and mass concrete complete all as specified and as directed by Engr-in-Charge.

M&L Hardcore of Broken stone or boulders gauge exc 63 mm but n exc. 100 mm ,deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engr-in-charge.

M & L for PCC (1:4:8) type D2 ( 40 mm graded stone aggregate) as in foundation, filling and mass concrete ,complete all as specified and as directed.

M&L for cement concrete in sub floor type C2, 1:3:6 using 40mm stone aggregate in flooring,100 mm thick ,complete all as specified and as directed.

Removing demolished materials/debris to a distance exc 13.50 KM and n exc 15 KM and depositing outside MD land complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight of curved on plan exc 6m mean radius built in in CM 1:6 ,complete all as specified and as directed.

M & L for cutting out bricks, forming jambs ,toothing for and bondinng new into old work incl value of new materials entering old walls and jointing and pointing in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for Cutting holes into or through brick wall built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 not exceeding 150 Sq CM as required complete all as specified and as directed.

Taking down cement plaster of any description on brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for 10 mm thick cement plaster on Brick or concrete surfaces in CM 1:6 ,complete all as specified and as directed..

M&L 3mm thick wall care putty on wall ,complete all as specified and as directed.

M & L for preparation of new surfaces on walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Supply only water proofing compound ,complete all as specified and as directed.

M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3% by weight of cement. [Note:- WPC shall be measured and paid separately ]

M&L for preparation of newly plasterd surface of concrete or brick surfaces and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

M&L for complete removal of existing treatment on wall and appying 3mm thick wall care putty .Thereafter applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for washing,rubbing down and stopping of distempered of old painted surfaces of wall and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

M & L for cement concrete in sub floor , sub base, floors and pavings cement concrete type C-2, 1:3:6 (40mm graded aggregate) 150 mm thick ,complete all as specified and as directed..

M & L for Reinforced cement concrete (design mix) in M-30 (20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span ,complete all as specified and as directed..

M & L for formwork with fair finished surface to side of soffits of floors, or roof beam, beam haunchings, girders, bressummers,lintels, cantilevers, shelves incl sup-posts, overhang etc, also splays bet floor and beams etc ,complete all as specified and as directed..

M& L for TMT bars 8 mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia for stirrups ,complete all as specified and as directed..

M& L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia ,complete all as specified and as directed..

M & L for Granite (of any type) tiles 20 mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing on floor complete.

M & L for Granite (of any type) tiles 20 mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

M & L for Machine cut cudappah stone slab 20 to 25 mm thick over cement screed bed , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and pointing complete.

M & L for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other simillar situations ,complete all as specified and as directed.

M & L for Vitrified ceramic tiles double charge , dark shade 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match ,complete all as specified and as directed.

M & L for Vitrified ceramic tiles double charge , dark shade 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match ,complete all as specified and as directed..

M & L for racking , cutting and waste on glazed tiles ,complete all as specified and as directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,complete all as specified and as directed.

M &L for glazed ceramic tiles in vertical surface 350x250x7 mm / 450x350x7mm thick , coloured tiles set and jointed in neat cement slurry and pointed in white or colour cement to match ,complete all as specified and as directed.

M &l for screed bed or bedding layer of mortar 15mm thick cement plaster 1:6 for laying floor finishes,complete all as specified and as directed.

M & L rendering 10 mm thick in cement mortar (1:4) as in backing coat for fixing of tiles in vertical surfaces ,complete all as specified and directed by Engr-in-charge.

Demolition of floor or wall tiles, stone slab of any description or thickness laid ,bedded and pointed in any morter all as specified and removing demolished materials and debris outside MOD land.

M & L for Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the marble shade.

Dismantling plain or corrugated steel sheeting,any gauge,thickness, including Nainital or similar pattern roof covering in any position including necessary steel double scaffolding (12 m to 15 M Height) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.50 Sqm each in each pane all as specified and as directed.

All as per item 45.00 here-in-before but with 3 mm thick figured glass.

S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work all as specified and as directed by Engr-in-Charge

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

S&F 9 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work , complete all as specified and as directed.

S&F 18mm to 19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work , complete all as specified and as directed.

S&F Magnetic catches No.2 for cupboard doors , complete all as specified and as directed.

S & F PVC fillets in lipping for door frame incl glue/ solution / ( fevicol or equivalent ) pressed , well finished etc , complete all as specified and as directed.

M&L for Extra over rates for external teak wood lipping 6 mm thick fixed with nails , complete all as specified and as directed.

M & L (wooden ) fillet work using 2nd class hard wood exc 6 & n. exc 13 sq.cm fixed with screw, plane fillet square, rectangle in section clean swan, secuared with nails or brads , complete all as specified and as directed.

M&L for preparartion of new surfaces of wood exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer , complete all as specified and as directed.

S & F Rim latch (125 mm size of latch) with two levers of brass body stone enamelled finish , with brass knob or lever handle and fixed , complete all as specified and as directed.

S & F Mortice lock Brass, vertical type, size 100 mm , 4 levers , complete all as specified and as directed.

S & F aluminium anodised barrel towel bolts of extruded section of length 150 mm including taking down old unserviceable barrel tower bolts , complete all as specified and as directed.

S & F stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame including taking down old hinges all as specified and as directed.

S & F 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate , complete all as specified and as directed.

S & F aluminium extruded alloy handles fabricated type anodised of size 150 mm including taking down old handles , complete all as specified and as directed.

S & F stainless steel door handles medium weight fabricated type of size 150 mm , complete all as specified and as directed.

S & F hasp and staple safety type of size 100 mm of aluminium anodized including taking down old hasp and staple , complete all as specified and as directed.

Re-securing or easing and adjusting without taking down shutters of any description and size , complete all as specified and as directed.

S & F 20 mm dia aluminium anodised tubular curtains rod with powder coated including taking down old curtain rod , complete all as specified and as directed.

S & F aluminium anodised brackets powder coated to match with rod for curtain rod of 20mm dia, complete all as specified and as directed.

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished , complete all as specified and as directed.

S & F Door closer hydraulically regulated, designation No. 3,Aluminium extruded section body universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg , complete all as specified and as directed.

M & L for Floor door stopper 150mm long , of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor , complete all as specified and as directed.

S & F Hat pegs Brass, solid body, 125mm to 175 mm , complete all as specified and as directed.

S & F Double action floor spring Hydrauilically regulated made up of minimum 1.25 mm thick aluminium alloy sheeet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty , complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm length of bolt and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy , complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick BMT,having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping scews complete all as specified and as directed.

S&F 1 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley,eaves gutters half round with rounded edges, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 ,and necessary steel double scaffolding (12 m to 15 M Height) complete all as specified and as directed. complete all as specified and as directed.

S& F mild steel Fe-410-W(Gde-E-250) quality-B, Joist, channel,angle,or tee sections, fixed independently,connecting plates,roof trusses , purlins etc,(cut to ordinary lengths i.e.within 20mm of the length indicated), intricate design complete all as specified and as directed.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-B,etc , ornamental and instricate design , complete all as spd and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges; clamps; hold fasts; wall ties plain angle clets for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps ,plate washers and similar small articles conforming to Fe.290. Gde-E-165 ,complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 , complete all as specified and as directed.

M & L for Mild steel screw bolts (machine made) 5 to 10mm dia of neck in mm with hexagonal or square heads at one end and screwed the others or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long , complete all as specified and as directed.

M & L for welding in repairs to roof truss,rafters , purlins,steel gates/ windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded exc 9 mm but n exc 20 mm [height of roof truss,rafter / purlins 12m to 15 m] , complete all as specified and as directed.

M&L for preparartion of new surfaces of steel exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L for preparartion of old surfaces of steel not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

S & F Aluminium composite Panel Grade AL-45 for exterior uses having panel thickness / sheet thickness 4mm with any texture / colour ,intricate and ornamental design, (silicon) sealant for joint filling including necessary steel double scaffolding (12 m to 15 M Height) complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillet.

S & F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of wall fixing on to wall to make PVC Frame as per specification and drawing.

M&L for Anodised aluminium snap grid frame work of size (605mm*605mm ) for false ceiling all as specified

M&L for Hangers 6mm dia. G.I. (upto 1200 mm length) size of grid (605mm*605mm ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Flat 40x3 mm size 60 mm long and expansion hold fastners 12.50mm dia. 40mm long , complete all as specified and as directed.

S & F PVC insulation pannels 10mm thick size (605mm x 605mm ) with EPS stuck to 1mm printed PVC sheet used in lieu of plain PVC sheet placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing as per SSR P-I , complete all as specified and as directed.

M&L for preparartion of new surfaces of steel exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

S&F in repairs 15 mm size bib tap cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed.

S & F in 15 mm size Kitchen sink faucet with pull down sprayer in stainless steel Dratal pull out sprayer faucet kitchen flexi spout brushed steel (DT-1) ( item diamentions - 32cm X 8cm x 8cm )complete all as specified and as directed.

S & F in repairs 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed.

S&F in repairs 15 mm size stop valve with long shank (consealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as specified and as directed.

S & F 20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F 15 mm size stop valve of PTMT any colour high pressure screwed for iron pipe, weight not less than 90 gms, including taking down old stop valve all as specified and as directed.

S & F in repairs taps,angle cock by using Teflon tape adhesive sealant length 10 m , width 1.5 cm.

S &F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber rings joints,laid in trenches or in floors.

S &F grating doom 100mm dia of PTMT (Min wt 25 gms) , complete all as specified and as directed.

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleats.(Min wt 150gms) , complete all as specified and as directed.

S & F Towel ring of PTMT fixed with ans including Chromium plated brass screws and wooden / plastic cleats (min wt 90 gms) , complete all as specified and as directed.

S &F PVC connections 15mm size with PTMT nuts of length 900mm , complete all as specified and as directed.

Material and labour 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete concilled,fixed to walls / ceiling or laid to floors including taking up or down old tubing and connected fitting, fixture , complete all as specified and as directed.

S & F in repairs Pillar cock auto closing system Make- JAQUAR code PRS-CHR-031L65 Auto closing system with 65mm extension Body chrome finish , complete all as specified and as directed.

Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing complete.

Re-fixing of old serviceable 20 mm bore galvanized iron tubing medium grade retrieved from relevent item of Sch A, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors , complete all as specified and as directed.

Material and labour 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors complete.

Supply and fix in repairs 32 mm size waste pipe, length 1.20m for wash hand basin / urinal / sink , complete all as specified and as directed.

Supply and fix in repairs 40 mm size waste pipe length 1.20m for wash hand basin / urinal / sink , complete all as specified and as directed.

Supply and fix in repairs 32 mm size waste coupling of PTMT for wash hand basin / urinal / sink , complete all as specified and as directed.

Supply and fix in repairs 40 mm size waste coupling of PTMT for wash hand basin / urinal / sink , complete all as specified and as directed.

Supply and fix in repairs Hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook , complete all as specified and as directed.

S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm , complete all as specified and as directed.

S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm , complete all as specified and as directed.

S&F in repairs 10 Ltr capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float and handle, fixed in position and connecting , complete all as specified and as directed.

S & F in repairs syphonic set for vitreous china low level flushing cistern of any capacity, complete all as specified and as directed.

S&F in repairs the internal fitting kit complete suitable for 10 to 15 ltr PVC low level flushing cistern , complete all as specified and as directed.

S&F vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and as directed.

S&F plastic water closet seat cover, white or black colour closed pattern with flat bottom including taking down old seat cover complete all as specified and as directed.

S&F polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks, including taking down old water tank cover all as specified and as directed.

S&F in repairs 15 mm size brass chromium plated zig zag type connector (coupling) for connecting wall mixer and GI tubing , complete all as specified and as directed.

Supply and fix in repairs 15 mm size wall mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising bib tap with all connected accessories, complete all as specified and as directed.

S & F in repairs 6 mm thick corner glass self with aluminum / SS railing incl brackets for fixing (size 300 mm x 300 mm ) etc , complete all as specified and as directed.

S & F in repairs 6 mm thick rectangular glass self with aluminum / SS railing incl brackets for fixing ( size 450mm x 150 mm ) etc, complete all as specified and as directed.

Supply and fix in repairs 15 mm size wash hand basin mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising single hole bib tap with all connected accessories, fixed complete.

S & F Nylon bird netting mesh Hole 32 mm size and length is 250 feet and breadth is 10 Ft and its breaking strength is 18 Kg approx and melting point above 80 Degree including screwing , binding with mild steel wire to roof truss and purlin and necessary steel double scaffolding (12 m to 15 M Height) complete all as specified and as directed.

S&F Vitreous china EWC wall mounted (white) incl taking down old water closet and refixing with seat cover,low level flushing cistern incl flushing kit, brackets for fixing ,making good existing surface etc

S & F in repairs single piece floor mounted EWC S (toilet /closet) continental white CNS-WHT-8515300 SPP JAQUAR BC 7608, Size 690X680X370MM soft close seat cover European water closet S trap type making good existing surface etc complete all as specified and directed by Engr-In-Charge.

S & F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe.

S&F PVC 160 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall.

S&F in repairs PVC 110 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall , complete all as specified and as directed..

S & F PVC (SWR) bends 160 mm bore any radius,complete all as specified and as directed.

S & F in repairs PVC (SWR) bends 110mm bore any radius,complete all as specified and as directed.

S & F in repairs PVC 110mm bore (SWR) coupler , complete all as specified and as directed.

S & F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm , complete all as specified and as directed.

S & F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm , complete all as specified and as directed.

M & l PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement , complete all as specified and as directed.

M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement , complete all as specified and as directed.

S & F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) , complete all as specified and as directed.

M & L for Cement concrete 1:3:6 type C2 bore of pipe 150mm Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested , complete all as specified and as directed.

M & L for Salt glazed stoneware drain pipes internal diameter of pipe 150mm laid in trenches and jointed , complete all as specified and as directed.

M & L for Bends and tapper bend of 150mm dia sections for Salt glazed stoneware pipe , complete all as specified and as directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door / window/Ceosetory windows & other Frames / Chowkhat of size 45 X 70 mm comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibers ( wood powder /rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ Cum, Screw withdrawel strength of 2200 N ( Face) & 1100 N ( Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners shall be paid for separately). Note : For WPC solid door / window frames, minus 5mm tolerance in diamention i.e. depth and width of profile shall be acceptable. Variation in profile diamentions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F factory made single extruded WPC ( Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 ( Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk /wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg /cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N /mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retarder and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engr-In-Charge.

S & F PVC connections 15mm size with PTMT nuts of length 750mm , complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks 2000 Litres capacity,triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I , complete all as specified and as directed.

S & F grating doom 100mm dia of PTMT (min wt 25gms) , complete all as specified and as directed.

S & F liquid soap container of PTMT fixed with and incl chromium plated brass screws and wooden/ plastic cleats , complete all as specified and as directed.

S & F in repairs tubular towel rail, aluminium anodised 20mm dia D type 60 CM long between flanges , complete all as specified and as directed..

S & F in repairs Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws , complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces , complete all as specified and as directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces , complete all as specified and as directed..

Taking down ceiling fan /EXHAUST FAN of any size or make and refixing the same all as specified and directed by Engr -in-Charge.

M&L Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade Conduit not less then 20 mm width with modular metal sunken switch with face plate for modular switch complete with brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified of the following:- Note : (1) Making good to match with the adjoining surface shall be included in the unit rate. (2) Rate is inclusive of Cutting/chases of wall/floor/ceiling

One light point controlled by one, two way switch

One ceiling /exhaust fan point controlled by one switch and regulator

One 3 pin 5 amp socket out point on the same board with other switches.

One3 pin 5 amps socket out let point on independent board

One bell/buzzer point controlled by one bell push.

All as per item No 156.00 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

S&F Switch piano, flush type single pole, one way 6 Amp all as specified and directed

S&F socket outlet 2 in 1, 3 pin, 6A, one way 6 Amp all as specified and directed

S&F switch socket combination 2 in 1, 3 pin 6A all as specified and directed

S&F switch socket combination 2 in 1, 3 pin 16A all as specified and directed

S&F Buzzer, Ding Dong AC, 230 Volts single pole all as specified and directed

S&F Bell push, flush type, 5 Amp all as specified and directed

M&L for ceiling rose PVC / Polycarbonate insulated body two to three terminal

S/F Modular Fan step regulator 120 W-2 module

S &F Lamp holder insulated body with back plate including LED lamp 7 watt with angle holder complete all as specified and directed.

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat srink envioromentel friendly Energy efficient ready to use pack , 20 Watt , 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos etc. with 100lum/watt, CRI> 70, Surge protection 4 KVA

S&F LED Luminare 600mmx600mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with 100lum/watt, CRI> 70, Surge protection 4 KVA.

M&L for sub main wiring with two single core 6 Sqmm FR PVC insulated and sheathed 1100 Volts grade, standed copper conductor ISI marked drawn into fixed in an including Casing -N-Caping/conduit with all fitting and accessories and one continuous run of 6.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and directed. Note :- Two single core cables along with earth wire and Casing -N-Caping shall be measured as one unit length

Supply and fixing of DB double door SPN 08 Way 240 Volts complete all as specified and directed

Supply and fixing of MCB SPN 40 Amps, 10 KA, 240 Volts complete all as specified and directed

Supply and fixing of MCB SP 10 to 32 Amps, 10KA ,240 Volts complete all as specified and directed

S&F ELCB,Isolator SPN 40A, 240V complete all as specified and directed

Supply and fix ceiling fan 1200 MM sweep, ISI Marked, 230 volts, 50 hz,complete all as specified and directed.

M&L Earthing complete with copper plate electrode 60×60cm ×3.15mm size & copper strip 20 x 3 mm brazed with copper plate buried in ground not less than 1.5 Mtrs deep with PCC chamber complete all as specified and as directed means of bolts, nuts, check nuts and washers of brass check nuts and washers of brass including necessary earth work, PCC chamber , CI cover with frame, funnel, mesh, Earth lead protection pipe, 7.5 Meter Earth Lead etc all as shown in electrical plate No 2 in SSR Part-I and connected to earth test point/LT Panel/Transformer including testing on completion all as directed by Engr in-Charge

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for taking out/laying pipe line and getting out, in hard/dense Soil complete all as specified and directed by Engineer-in-charge.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge..

Disconnecting ,dismantling and taking down of unserviceable rusted water tubing GI of size 25 mm from existing place in trenches/wall/floors/ceilings complete all as specified and directed by Engineer-in-Charge:

Supplying & Laying, connecting and testing GI Pipe 25 mm bore medium grade including necessary fittings to walls,ceiling, laid in floor and in trenches including all fixing accessories complete all as specified and directed by Engineer-in-Charge

Dismantling and taking out unserviceable gun metal gate valve/stop valve of size 25 mm to 20 mm complete all as specified and as directed.

Supply and fix gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of sizes 25 mm dia complete all as specified and as directed by Engineer - in-Charge:

Dismantling damage and broken valve chamber of size 900x900x900mm including unserviceable rusted MS cover complete without disturbing the existing pipe lines valves and provide valve chamber including necessary earth work in any type of soil PCC 1:1.5:3 in base concrete brick work in CM (1:6) with 10mm thick plaster internally and 15mm thick externally in CM (1:4) 6mm thick MS sheet cover with hinges and locking arrangements fixed to angle iron frame made out of 502x50x6mm MS complete with 2 coat of synthatic enameled paint over a coat of red oxied on all steel work and 2 coats of white washing on plastered surface of valve chamber of any sizes complete all as specified and as directed by Engr - in- charge.

Supply and fixing in repairs fully automatic DOL starter suitable for 01 to 3 HP Pumping set 415 volts 3 phase as existing in panel board including taking down existing starter complete all as specified and directed.

S&F Monoblock pump set suitable for 415 V 3 Phase system having capacity upto 05 HP , complete all as specified and as directed.

Supply and fixing LED Light fitting Mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED Lamp including connecting up with three core flexible copper conductor cable of suitable size complete with 100lum/watt, CRI> 70, Surge protection 4 KVA. , complete all as specified and as directed.

Supply and fixing of DB double door SPN 12 Way 240 Volts complete all as specified and directed

Supply and fixing of MCB SPN 63 Amps, 10 KA, 240 Volts complete all as specified and directed

Supply and fixing of MCB SP 10 to 32 Amps, 10KA ,240 Volts complete all as specified and directed

Supply and fix ceiling fan 1200 MM sweep, 230 volts, 50 hz,complete all as specified and directed.

M/s Qureshi Construction Co

Jay Jyotirling construction co.

askonstruct and supplier