Running Works Contract for effecting various works for a period of six months in Rural / APK Sub Division of Aruppukottai Division

Amount

Running Works Contract for effecting various works for a period of six months in Rural/APK sub division of APK division

Excavation of pole pit (1.25m * 0.5m*1.5m)

Erection

Excavation of pole pit (1.25m * 0.6m*1.83m)

Erection

Transporting of 7.32m, 7.5m, 8m, 8.23m RCC poles/km

Transporting of 9m, 9.14m RCC poles, RS Joists, tubular & rail pole/km

Loading and Unloading of 7.32m, 7.5m, 8m, 8.23m RCC poles

Loading and Unloading of 9m, 9.14m RCC poles

Concreting of poles as per Board Standards (2'*2'*5'). The material such as sand, jelly, etc., have to be supplied by the contractor except Cement supplied by contractor (Cement concrete mix 1:4:8 using 40mm hard broken stone including cost of labour charges.for placing Transporting of sant,jally,from box and water curing for 14 days etc,.complete.

Coping of poles

Coil earthing per pole & pole earthing

Excavation of stay pit (1.00m * 0.5m*1.5m)

Erection

Fixing of V cross arm, Channel cross Arm3 1/2'

Fixing of LT Three phase cross arm

Fixing of LT single phase cross arm

Fixing of HT / LT TI fitting

Fixing of Tapping channel cross arm

For 7/3.35 ACSR (per span/wire)

For 7/4.09 ACSR (per span/wire)

Stringing, Sagging, binding including transporting of For 7/2.59 ACSR

Resagging of HT. 7/4.09

Resagging of HT.7/3.35

Resagging of LT.7/3.35

Resagging of LT line 7/2.59

Flat Guarding (4 wires)

Fixing of one earthing device

Erection/ Dismantling of Upto 150 KVA

Erection/ Dismantling of 250 KVA

Erection/ Dismantling of 500 KVA

Erection / dismantling of Metering Set

Erection of feeder cable with open type fuse unit per feeder and for each addl feeder

Bus bar arrangement with open type

Transporting of distribution transformer upto 75 KM

Loading and Unloading of distribution transformer Below 250 KVA

Loading and Unloading of distribution transformer 250 KVA

Loading and Unloading of distribution transformer 500 KVA

Plinth Work For 500 KVA DT including all materials

Loading /Un loading of Metering Set

Excavation of pole pit stay pit, for urgency work at various location Using JCB by board staff(Specific approval should be obtained from EE)

Erection of new DT at structure for using private vechicle (crane) with board staff/for loading(Specific approval should be obtained from EE)

Replacement of failed transformer using private vechicle (crane) with board staff(Specific approval should be obtained from EE)

Street light switching point arrangement

Alteration of clamps

Channel / Flat / Angle

T.I .Fitting welding with clamps

Changing of pin point to cut point LT

Changing of pin point to cut point HT

Single Phase service connection

Three Phase service connection

Dismantling of deteriorated poles with concrete in damaged condition including grill separation etc.,

Dismantling of poles without concrete in damaged condition including grill separation etc.,

Replacement of detoriated stay rod

Dismantling of 3.5' V cross arm and channel cross arm

Dismantling of TI Fitting

Dismantling of Single phase/ 3 phase cross arm

complete replacement of worn out earth wire per structure

Transformer structure (Double coat)

Pole (Colour washing with emulsion on Labour only) (Double coat)

For transformer only (Double coat)

Details of transformer name board including painting cost of MS sheet writing etc., complete I seating channel

Setting right of leaning of HT pole or LT pole including X arms, TI fittings

For ordinary trees

For coconut and Palm trees

Replacement of weak Disc

Replacement of weak Insulator