PROVISION OF FALSE CEILING TILING AND ADDN/ALTERATION OF CERTAIN MISC WORKS IN CG DHQ 3 ADMIN BLDG NO. P-15 NEW MANGALORE UNDER GE(I)(CG)GOA

Amount

SCH A PART-I (B/R ITEMS) Taking down chowkats or frames n exc 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description n exc 1 sqm each complete all as specified and directed.

Taking down and re-fixing of shutters in same opening n exc 1 sqm each complete all as specified and directed.

Taking down and re-fixing of shutters in same opening but exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S & F factory made PVC door frame of size 50mmx47mm made out of 5mm thick plain colour, PVC sheet reinforced with Mild steel square tube as per specifications and drawings complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F Stainless Butt hinges 100mm, pin, bright polished and fixed, type B-11 complete all as specified and directed

S & F 150mm size aluminium handle (ISI Marked) cast type, anodized, fixed complete all as specified and directed.

S & F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down old unserviceable pipe complete all as specified and directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down old unserviceable pipe complete all as specified and directed.

Supplying and laying of 40mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down old unserviceable pipe complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required in brick walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

S & F in repairs Pillar taps fancy type 15 mm bore cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15mm bore Bib taps fancy type, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F 40mm bore Stop valves fancy type, Chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F 15mm bore Stop valves fancy type, Chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F PVC connection 15mm size with PTMT nuts of lengths 450mm, complete all as specified and directed.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated, suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, including taking down of old one complete all as specified and directed.

S & F in repairs Soap dish vitreous china coloured approximate size 160x160x90mm, any type, fixed to plugs with Chromium Plated brass screws complete all as specified and directed.

S & F in repairs Vitreous china wash basin, white, flat back, Size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply with 32mm dia waste pipe complete all as specified and directed.

S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, including 32mm dia PVC flushing pipe complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white , including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover, mild steel chromium plated hinging device complete but excluding flushing cistern including making good damaged/disturbed surfaces complete all as specified and directed.

S & F in repairs 40mm bore Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight for 40mm - 270gms) complete all as specified and directed.

S & F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

M & L 16 to 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

Vitrified Ceramic tiles light shade of 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm screed bed 1:4 including dismantling the old unserviceable one complete all as specified and directed.

All as per Item No 31.00 here-in- before but as in skirting over 10mm thick rendering in Cement mortar (1:4) complete all as specified and directed.

M & L 25mm thick cement concrete type B-O, 1:2:4 (using 12.5mm graded stone aggregate) as in floors finished rough to receive floor finishes complete all as specified and directed.

S & F Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exc 0.06sqm but n.exc 0.11sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 including dismantling the old unserviceable one complete all as specified and directed.

S & F Glazed ceramic tiles in vertical surface 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing plaster in cement mortar 1:4 including dismantling the old unserviceable one complete all as specified and directed..

S & F Aluminium snap grid size 605 x 605mm false ceiling frame work of angle 25 x 25 x 2mm. Main TEE 38 x 25 x 1.5mm and cross TEE 25 x 25 x1.4mm complete all as specified and directed.

Providing and fixing 12mm thick perforated Gypsum Board 600x600mm size in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

S & F Hangers 6mm dia GI (upto 1200 mm length) of grid size 605x605mm adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

M & L Providing & fixing of Aluminium composite panel of approved make and colour for wall cladding for straight Brick/Rcc/stone walls & columns/beams with necessary Aluminium frame works at required level made out of 50 x 25 x 3mm 'C' section equivalent. The panel should consist of 3mm thermoplastic core of antitoxic LDPE sandwiched between 0.5 skins thick Aluminium sheet making a total panel thickness of 4 mm. The surfaces will be finished with PVDF based coating on top sides and service coating on reverse sides would be in polyster paint. The system shall be fixed using GI brackets, Aluminium 'L' cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done using silicon weather proofing sealant with necessary rods etc., complete with all lead & lift, as per manufacturers specifications complete all as specified and directed.

S & F Powder coated anodised aluminium frame for windows, ventilator with one or more rebates including joining cleat for fixing etc. complete (Minimum thickness of powder coating 50 micron) complete all as specified and directed.

S & F Powder coated (minimum thickness of powder coating 50 micron) of any colour Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

S & F Sheet glass, 4mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire stapples complete all as specified and directed

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with Chromium plated brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

M & L providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates, brackets etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S & F 12mm thick toughened glass in squares exceeding 0.5 Sqm in each pane complete all as specified and directed. Note: Aluminium frame shall be measured and paid separately

S & F 12mm thick toughened glass & including necessary glass fixing patch fitting complete all as specified and directed. Note: Aluminium frame shall be measured and paid separately

S & F stainless steel handle of 200mm size fixed on glass panel complete all as specified and directed.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S & F wall to glass hinge 90mm long for 10 to12mm thick glass brass is used as base material complete all as specified and directed.

S & F wall to glass U shaped 4mm thick stainless steel 304 connector for 10 to 12mm thick glass complete all as specified and directed.

S & F core stainless steel lock chrome finished for 12mm thick glass to glass Double door lock without cutout including key complete all as specified and directed.

Removing plant/weeds from the roof tops/pipe lines and applying deweeding chemicals, removing rubbish off the premises complete all as specified and directed..

M & L preparing 2 to 3mm thick cracked surface of concrete and applying any approved crake filler complete all as specified and directed..

Excavation in post holes in soft/disintegrated rock each n exc 0.50cum getting out, returning in and ramming earth or broken rubble mixed with earth around in layer not exc 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

S & F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1998 grade St.-240, complete all as specified and directed

S & F Mild Steel work of Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S & F Mild Steel work of Fe 410W (Gde E-250) quality A for 6mm thick Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed.

M & L Preparation of New or previously untreated steel surface and applying two coats of Synthetic enamel paint over a coat of red oxide zinc chrome primer on surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed..

M & L 100mm thick Plain Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) in panels finishing cement concrete surface even and smooth using extra cement complete all as specified and directed. Note:- Glass density strip shall be measured and paid separetly under Item No. 63.00

Supply only 3mm thick and 38mm width Glass dividing strips complete all as specified and directed.

Excavation in trenches width not exceeding 1.5mtr and depth not exceeding 1.5metre for foundations, not exceeding 10Sqm on plan for manholes etc and getting out in soft/disintegrated rock, complete all as specified and directed.

M & L Plain Cement Concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation /mass concrete for wall and post struts complete all as specified and directed.

M & L Applying 2 coats of white wash on newly plastered surface of wall complete all as specified and directed.

M & L returning filling in including spreading levelling watering in layers n.exc 25 cm in soft/disintegrated rock complete all as specified and directed.

Removing excavated material to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point complete all as specified and directed.

Supplying & Laying of 60mm thick machine pressed precast concrete paver block any shape & size confirming to IS 15658-2006 of M-50 grade with grey cement and pigment etc including dismantling the old unserviceable one complete all as specified and directed.

M & L 100mm thick Plain cement concrete type D2 1:4:8 (using 40mm graged stone aggregate) as in sub base etc complete all as specified and directed.

M & L Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed.

M & L Dressed laterite stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6 including demolition of old stone masonry wall complete all as specified and directed.

M & L Pre-cast cement concrete block masonry type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10cm in width and setting in cement mortar 1:6 including demolition of old stone masonry wall complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L Cement plaster 15mm thick in cement mortar 1:4 on brick masonry surfaces finished even & fair without using extra cement including mixing of Water proofing compound complete all as specified and directed. Note:- WPC will be measured and paid separately.

Supply only Integral waterproofing compound complete all as specified and directed.

M & L Rendering 15mm thick internal cement plaster in cement mortar 1:6 on fair faces of stone masonry surfaces is to be finished even smooth with out using extra cement complete all as specified and directed.

M & L Preparing new plastered surfaces of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying two coat of Oil emulsion distemper complete all as specified and directed.

M & L Preparing new plastered surfaces of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying two coat of cement base paint over a coat of chak whitening complete all as specified and directed.

M & L Preparing old surface of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and applying one coat of oil emulsion distemper complete all as specified and directed.

M & L Preperation of old treated external surfaces of walls etc by washing, rubbing down and stopping of painted surfaces and applying one coat of weather proof exterior emulsion grade (anti fungal paint) paint premium quality complete all as specified and directed.

M & L Preparing old treated steel surface of any description over 10cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L Providing, cement concrete type C1, 1:3:6(using 20mm graded stone aggregate)as in lintels upto 1.5m clear span, cills, steps; and other similar bands,plinth courses, string courses,parapets and ,copings, kneelers, apex stones, bed plates, kerbs not provided and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M & L Hardcore of gauge n exc. 63mm Broken stone or boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L Plain cement concrete type B1-1:2:4 (using 20mm graded stone aggregate) in height, coping,kneelers, apex stones, bed plates, incl.weathering, slightly, rounded or chamfered angles and throating complete all as specified and directed.

SCH A PART-II (E/M ITEMS) Taking down aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit complete all as specified and directed.

M & L Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade with multistranded copper conductor drawn through and including cover plate as suitable module and including 20mm dia PVC rigid non metallic PVC conduit with all accessories concealed in walls and including provision of 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor complete all as specified and directed :-

(a) one light point controlled by one, one way switch

(b) one fan point controlled by one way switch

(c) one switch socket outlet 5 A on same board with other switch

(d) one switch socket outlet 5 A in-dependent board with cable 1.5 sqmm

All as per item No. 89.00 described here-in-before but with copper conductor cable FRLS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated FRLS copper conductor cable as earth continuity conductor on independent board complete all as specified and directed.

M & L Sub main wiring with 2 runs of 6 sqmm single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade FRLS drawing in and including PVC rigid medium grade conduit concealed in wall of suitable size complete including provn of 6 sqmm PVC insulated FRLS copper conductor earth continuity wire including taking down old unserviceable one complete all as specified and directed. Note :- One run of three single core cable and conduit & accessories shall be measured as one length(i.e 1 RM) .

S & F Switch Modular 6A one way, 1 module complete all as specified and directed.

S & F Switch Modular 16A one way, 1 module complete all as specified and directed.

S & F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S & F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & F sheet metal enclosure SPN with two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity complete all as specified and directed.

S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F LED lights fitting 1x 20, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexiblecopper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roofceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and directed.

S & F LED light fitting 1x 9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down the old unserviceable one & deposited to MES store complete all as specified and directed.

S & F Exhaust fan, Steel (Metallic) body, AC, single Phase. 230V of size 250 mm sweep with, blades, and frame and louvers including taking down the old unserviceable one & deposited to MES store complete all as specified and directed.

S & F sheet metal enclosure double door, acrylic window type for MCB DB, TPN, 4 way 415V with 200 A rated bus bar complete all as specified and directed.

S & F sheet metal enclosure double door MCB, DB, SPN 8 way 240 V with 200 Amp rated bus bar complete all as specified and directed.

S & F 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 32 A in the DB with connection testing and commissioning complete all as specified and directed.

S & F MCB SPN 32 Amps 240 Volt C Curve with breaking cap 10 kA complete all as specified and directed.

S & F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of capacity SP 6-32 AMP in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S & F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

M & L Earthing complete with galvanised steel earth plate electrode 60cm x 60cmx 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing test point complete all as specified and directed including testing on completion.

M & L Sub main wiring with 4 runs of 4 sqmm single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade FRLS drawing in and including PVC rigid medium grade conduit concealed in wall of suitable size complete including provn of 2 x 4 Sqmm PVC insulated copper conductor earth continuity wire including taking down old unserviceable one complete all as specified and directed. Note:- 6 run of 4.00 Sqmm copper conductor with PVC conduit & accessories shall be measured and paid in one run( i.e 1 RM)

M & L Sub main wiring with 2 runs of 10 Sqmm single core PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade FRLS drawing in and including PVC rigid medium grade conduit concealed in wall of suitable size complete including provn of 1x10 Sqmm PVC insulated copper conductor earth continuity wire including taking down old unserviceable one complete all as specified and directed. Note:- 3 run of 10 Sqmm copper conductor with PVC conduit & accessories shall be measured and paid in one run( i.e 1 RM)

S & F LED light fitting 1x16 Watt flameproof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

KDR CONSTRUCTION

KOTIAN -ECC

Shetty Construction Co