PROVN OF 03 x CLP (CENTRAL LECTURE POINT) ALONGWITH SHED

Amount

B/R Portion Surface excavation not exceeding 15 cm deep and averaging 15 cm deep and getting out in soft/ loose soil including cutting of grass, roots, bushes if any and filling of lower portion with soil obtained from cutting and dressing complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m deep in soft/loose soil for foundation etc n exc 10 Sqm on plan and n exc 1.5 Sqm in depth complete all as specified and as directed by Engineer-in-charge.

Material and labour for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in foundation, filling & mass concrete complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate in foundation, filling & mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L brick work with fly ash bricks old size bricks old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified & directed by Engineer-in-Charge

Returning filling in including sprading, levelling, watering & well ramming in layers n.exc.25 cm thick complete all as specified and as directed by Engineer-in-Charge.

Removing the excavated material (soil) upto a distance n.exc.50 mtr & depositing where directed a level n.exc. 1.5 mtr above the starting point. complete all as specified and as directed by Engineer-in-charge.

Material and labour for sand filling in floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

Material and labour for hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface (15cm compacted thickness) complete all as specified & directed by Engineer-in- charge.

M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub-base below floors complete all as specified and directed by Engr-in-charge.

M&L for machine cut Kota stone slab flooring 20-25 mm thick (minimum size 55cm x 55cm) laid over and including 15 mm thick screed base in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed by Engineer-in-Charge.

M&L for Kota stone slab 20-25 mm thick in riser of steps, skirting , dado and pillar laid over and including 10mm thick backing coat in CM (1:4) & jointed in neat cement slurry mixed with pigment to match shade of slab including rubbing & polishing complete all as specified & directed by Engineer-in-Charge.

Material and labour for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 on wall finished even and fair complete all as specified and directed by Engineer-in-Charge.

Material and labour for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and directed by Engineer-in-Charge.

Supply and fixing pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new steel surfaces over 10cm in width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered or pointed surface of walls and applying two coats of cement base paint complete all as specified & directed by Engr-in-charge

E/M Portion M&L for concealed/surfacePoint wiring with two single core PVC insulate, unsheathed multistranded copper conductor cable underground or floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sqmm (FRLS) includng MS shunk sheet metal box with 3mm thick hylam sheet top cover to be fixed and installed in wall nince of suitable required size for mounting switches, sockets etc complete all as specified and directed by Engineer-in-Charge.for one light point controlled by one switch and making good diturbed surfaces complete all as specified and directed by Engineer-in-Charge.

,-----ditto---- All as per srl item No 4 above but for one 3 pin 5 Amps socket outlet point on independent board all as specified and directed by Engr-in-Charge.

,-----ditto---- All as per srl item No 04 above but point wiring with 4 sqmm multi stranded conductor cable and 2.5 sqmm unsheathed copper conductor earth wire for 15 amps power point complete all as specified and as directed by Engr-in-Charge.

Supply & fixing switch piano type flush button single pole one way 5/6 Amps, 230 volts complete all as specified & directed by Engineer-in- charge.

Supply and fixing piano socket 2 in 1, 2/3 pin 6 Amp flush type 250 Volts AC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing piano socket 2 in 1, 3 pin 5 Amp and 15 amp flush type 240 Volts AC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing piano switch 15 Amp flush type 240 Volts AC complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED light fitting 1 x 20 W, 230 Volts integral sleek polycarbonate LED Channel (composite type) with white acrylic cover includeing making connection complete all as specified and directed by Engineer-in-Charge. Make: Bajaj/Crompton/Havells

S&F sheet metal enclosure DB single pole and neutral for 240 Volt 6 way with 200 Amps rated busbar flush/surface mounting double door including wooden board complete all as specified and directed by Engineer-in-Charge. Make: Legrand/L&T/Havells

S&F MCB single pole 240 volt 6-32 Amp 10 KA complete all as specified and directed by Engineer-in-Charge. Make: Legrand/L&T/Havells

Supply and fix MCB SPN 240 volt 40 amp 10 KA complete all as specified and directed by Engineer-in-Chrage. Make: Legrand/L&T/Havells

M & L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 V grade of different cross-sectional area insulated armoured cable 6sqmm 2 core, under ground/on wall/pipe etc complete all as specified and directed by Engineer-in-Charge :-

Supply and fix tubes 'light grad', galvanised, with all fitting: laid in trenches 40mm dia complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation for electric pol;e etc complete all as specified and directed by Engineer-in-Charge.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

GOYAL ENTERPRISES

Dashmesh Construction Company

Aggarwal brothers and company