Design and Construction of Surface Car Parking and Bus Parking with utility Buildings at Semmozhi Poonga in Coimbatore

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

First Depth

Plinth Beam

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Footings Centering

Plinth Beam Centering

Column Centering

Roof Beam and Roof Slab Centering

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Foundation and Basement

Ground Floor

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Foundation and Basement

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Foundation and Basement Wall

Ground Floor Wall

Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm

Ground Floor Wall

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Ground Floor Plastering

Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Ground Floor Plastering

Stucco Plastering 12 mm thick using blue granite chips of size 10 mm and below over a base plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)), 12mm thick,including cost and conveyance of all materials to site etc,complete as per standard specification.

Compound Wall Mural Stucco Plastering

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Ground Floor Terrace Area

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Ground Floor Terrace Area

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying & fixing door shutters for Solid Core Flush Shutters with Teak ply on both side with teak wood lipping alround 35mm thick, single leaf confirming to IS:12406/1989 with 35x12mm T.W. Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings, such as 300 mm tower bolt 2nos, 200mm towerbolt 1 No. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos and 1No. Door stopper etc complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug

Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:1.5:3 (One cement, Two M - sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed

Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification

Truffing of Korean grass / mexican grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supply and fixing of Pandanus tectorius - overall height 10' including all cost etc completed.

Electrical SOR and Non- SOR :RATES FOR MATERIALS: ELECTRICAL LAMPS, FITTINGS AND CONNECTED ACCESSORIES. STREET LIGHT FITTINGS

Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hot dip galvanized confirming to BESN ISO1461 with thickness of 65 Micron

120W LED Street Light Fitting with LED

Highmast (16 Metre) with 8 Nos. 150W LED Fitting

FANS - CONFORMING TO ISS

48" Ceiling Fan 5 Star Rated (without Regulator) HIGHER END (Crompton / Equivalent)

400mm Sweep WALL MOUNTING FAN

Fan Step Regulator 100W - 1 Module

MODULAR SWITCHES

6A Switch 1W - 1 Module

16A Switch 1W - 1 Module

FLUSH MOUNTING BOXES (GI)

Flush Box - 3 Module

Flush Box - 4 Module

Flush Box - 6 Module

Flush Box - 8 Module

COMBINED PLATES (PLASTIC)

3 Module Cover Plate

4 Module Cover Plate

6 Module Cover Plate

8 Module Cover Plate

SOCKET - 230V

6A 5 pin Universal Socket - 2 Module

16A 3 Pin Switched Socket - 3 Module

PLUG AND SOCKETS

5 Amps 3 Pin Top

25A Flush type Wall Socket with 25A DP MCB for AC Plug

THREE PHASE WATT HOUR METERS

AC 3 Phase 400V 50HZ unbalanced load 4 Wire 50 Amps Watt Hour Meter

SERVICE CONNECTION ACCESSORIES L.T. 1100V PVC ALUMINIUM ARMOURED UNDER GROUND CABLE WITH ISI MARK

4 core 10 sq.mm. PVC Armoured UG Cable

4 core 16 sq.mm. PVC Armoured UG Cable

CONDUCTOR

GI No.8 Wire and No.6 Wire

CABLE GLANDS

Cable Gland suitable for 4core 10 sq.mm. UG Cable

Cable Gland suitable for 4core 16 sq.mm. UG Cable

NEUTRAL LINK 15 AMPS

12 Way Neutral Link

MS ANGLES

2" x 2" x 1/2" (50 x 50 x 12.5mm)

ALUMINIUM FLAT

Aluminium Flat (1" x 1/4") (25 x 6.25mm)

CONDUIT MATERIALS 16 GAUGE

Conduit Pipe 25mm (1") Heavy Gauge

Conduit Pipe 32mm (11 /4") Heavy Gauge

CONDUIT BENDS - 16 GAUGE

Conduit Solid Bend 25mm (1")

Conduit Solid Bend 32mm (11/4")

PVC COUPLES

PVC Couples 25mm (1")

PVC Couples 32mm (1 1/4")

PVC SADDLES

PVC Saddles 25mm (1")

PVC Saddles 32mm (11/4")

PVC JUNCTION BOXES

Junction Boxes 1, 2, 3 & 4 way 25mm (1")

Junction Boxes 1, 2, 3 & 4 way 32mm (11 /4")

INSULATION TAPE PVC

PVC Insulation Tape (19mm)

BRASS SCREWS

Brass Screws (25mm) 1" No.6

Brass Screws (50mm) 2" No.10

CONDUIT SADDLES

Conduit Saddles 25mm (1")

Conduit Saddles 32mm (11 /4")

PART "M"

Danger Board as required by the Electrical Authorities

Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

VIDEO SERVILANCE SYSTEM (CCTV)

ARMOURED LAN & CCTV CABLE -CAT-6

PoE SWITCHES FOR CCTV IP CAMERA - HIGHER END -4 Port

NETWORK VIDEO RECORDER FOR CCTV HIGHER END -32 Channel - 2 SATA (2 Nos. Hard Disk)

NON SOR ITEMS : LED Fittings

24W LED Surface Mounted Type Patten Light Fitting

18W LED Wall Mounted Light Fitting

12W LED Bulk Head Light Fitting

18W LED Surface Mounted Type Light Fitting

9W LED Mirror Light Fitting

POINT WIRING ,CONDUITS & WIRINGS,SWITCHES AND SOCKETS The rate includes accessories like saddles and clamps,bends or inspection bends,junction boxes .The necessary civil works with paints and removal of debris shall be done for connected works and no extra payment will be made for the same. For above false ceiling the conduiting is open and in below false it should be concealed as required.

CIRCUIT MAINS TO LIGHT/POWER POINTS

Supply and Wiring to the Circuit mains (DB to switch board/first point of light fitting/power socket) using 6 Runs of 2.5sqmm (2 nos of circuit and each circuit is having Phase+Neutral+earth wires) multi strand PVC insulated copper conductor (FRLS) in 25mm dia. PVC conduit in concealed system in ceiling/wall and all complete complying with relevant standard specifications

Supply and Wiring to the Circuit mains (DB to switch board/first point of light fitting/power socket) using 3 Runs of 2.5 sqmm (P+N+E) multi strand PVC insulated copper conductor (FRLS) in 25mm dia. PVC conduit in concealed system in ceiling /wall and all complete complying with relevant standard specifications

Supply and Wiring to the Circuit mains (DB to Switch board / power socket) using 3 Runs of 4 sqmm (P+N+E) multi strand PVC insulated copper conductor (FRLS) in 25mm dia.PVC conduit in concealed system in ceiling/wall and all complete complying with relevant standard specifications

SECONDARY WIRINGS TO LIGHT/POWER/FAN POINTS

Supply and Wiring to the light points/ 6A plug point using 3 Runs of 2.5sqmm for primary point (switch to first point) and 3 Runs of 1.5 Sqmm for secondary point) (looping), multi strand PVC insulated copper conductor (FRLS) in suitable size PVC pipe in concealed system . The primary point rate should inclusive of supply and fixing of 6A modular type switch with face plate in a suitable size modular box in concealed system, all complete complying with relevant standard specifications

Primary point

Secondary point

Fan Point(Same as Primary Point including 1 no fan step regulator(1 module)

Supply, laying, testing and commissioning of 4 Runs of 4 sqmm and 1Run of 2.5 sqmm multi strand PVC insulated copper conductor (FRLS) in 25/32mm dia. heavy duty PVC conduit as concealed system in roof slab / wall / column etc.

LT SWITCH BOARDS METER BOARD

Supply, Installation, testing and commissioning of 3phase wall mounting (EB)meter box with wired procelin type fuse carrier the board shall be fabricated as per the TNEB Norms.

DISTRIBUTION BOARDS Supply, fixing, testing and commissioning of the double door type VTPN 4way MCCB DB comprising of the following : VTPN DB - 12 WAY 63A TPN MCCB 16KA with all other required accessories – 1 set as incomer. 25A TP MCB 10KA – 12 Nos.

With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall. The rate shall include necessary connected civil works like chipping, rough plastering etc.

LPDB -TPN- 4WAY Supply, fixing, testing and commissioning of the single door type Single Phase 8way MCB DB comprising of the following : 40A TPN MCB 10kA – 1No. as incomer. 25 DP RCBO 100mA – 3 Nos. as phase incomer. Each 25A DP RCBO phase incomer consist of 4nos.10/16/25A 10KA SP MCB (C-Curve) in a separate compartment as required by the Electrical Inspectorate.

With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall/ fixed in column. The rate shall include necessary connected civil works like chipping, rough plastering etc.

Street Lighting DB

Supply, fixing, testing and commissioning of the single door type Single Phase 8way MCB DB comprising of the following : 40A TPN MCB 10kA – 1No. as incomer. With 24Hrs timer 25 DP RCBO 100mA – 3 Nos. as phase incomer. Each 25A DP RCBO phase incomer consist of 4nos.10/16/25A 10KA SP MCB (C-Curve) in a separate compartment as required by the Electrical Inspectorate.

With necessary tinned copper busbars, interconnections, separate earth bus, separate neutral bus for each phases. The board shall be powder coated type fixed with concealed system in wall/ fixed in column. The rate shall include necessary connected civil works like chipping, rough plastering etc.

EARTHINGS:

Supply and installation of earth pipe electrode as per IS 3043 complete with 3mtr long with 40mm dia 'B' class G.I. pipe and GI earth plate of size 600mm x 600mm x 6mm including 2 runs of 50 x 6mm GI flat upto test link from plate earth electrode, watering funnel and necessary bolt, nut and double washer. Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortor. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The plate electrode shall be filled with alternate layer of salt and charcoal as required full depth. The Cover shall be heavy duty to suit heavy vehicle movements. (Highmast - 9, Street Lighting - 2, DG Set-4(2Body, 2Neutral), LT Panel - 2Nos)

VIDEO SERVILANCE SYSTEM (CCTV)

Supply, installation, testing and commissinoning of, 2 Megapixel low light power over -coax(PoC), Outdoor bullet type HD Output, network,up to 720 P resolution, Low illumination, 3.6mm lenss, tru day / Night , OSD menu, Smart IR, Up to 40 m IR Distance, necessary suports, complete all. Make : Uniview / Panasonic / Hikvision

Plumbing Items

Gun metal Gate Valve (Heavy Duty )

50 mm dia

Gun metal Wheel valve (Heavy Duty )

40 mm dia

32 mm dia

25 mm dia

Brass chormium plated screw down tap 15/12 mm dia (Heavy type)

Chromium plated pillar tap (Heavy type) -15/12 mm dia

Chormium plated stop cock 15 mm dia

Cp Heavy duty Bottel trap 32 mm

Oriya Type Indian Water Closet 580mm x 440mm with "P" or "S" Trap

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing of White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm. Including drain pipe, fixing accessories, control valve complete all.

Speical type Mirror of size 1000X 780 mm

Stoneware Gully trap of size 150x 100 mm with cast Iron Double gratings.

Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings - 100 mm x 75 mm including all charges etc, complete as per standard specification.

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.75mm dia PVC Pipe [4 Kg/SqCm]

P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

32 mm dia pipe

75 mm dia pipe

110 mm dia pipe

Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications.

PVC Specials for water supply arranagement

32 mm dia

Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications.

Elbow

Door Elbow

Tee with Door

Vent Cowl

Supplying laying and jointing CPVC schedu;e -80. Pipes of approved quality and best varity of the following sizes including fixing CPVC specials but excluding cost of specials. Cutting threading of pipes and fixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holes in roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. , complete.

15mm dia

20 mm dia

25 mm dia

32 mm dia

50 mm dia

CPVC Specials

Elbow

50 mm dia

32 mm dia

25 mm dia

20 mm dia

25 mm dia

20 mm dia

25 mm dia

20 mm dia

Coupling

50mm dia

32 mm dia

25 mm dia

20 mm dia

ORDINARY SOIL (SS20B) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (SS20B)

Construction of brick masonry inspection Chamber with air tight SFRC Cover with two screening arrangement with second sort table moulded brick in cement morter 1;5( 1 cement ; 5 sand) for valves with pre cast cement concrete 75mm thick 1;2;4; with 100 mm square opening including centering,shuttering and reinforcement for 1;2;4 mix ( 1 cement ; 2 sand 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1;5;10 ( 1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with 12mm thick cement mortar 1:3 ( 1 cement : 3 sand) finished with a floating coat of neat cemenet complete as per standard design. 600 x 600 mm internal size ( Depth up to 1000mm)

Supply and providing 1000 litres capacity Priming Tank made up of PVC. Including float control valve complete all,.Make: SINTEX / EQUIVALENT

300mm dia RCC Hume Pipe