Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.4 LAccepted-AOC H NO 273 VPO SURHERA WEST DELHI 110043 | WEST DELHI | DELHI | 110043 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹18.0 L+₹2.1 L (13.4%)Rejected-Finance MCB Z 2 13519 ST NO 4 GREEN AVENUE BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹18.8 L+₹3.0 L (18.7%)Rejected-Finance | L3 | Rejected-Finance Rejected |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
20 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Faridkot
GE Faridkot Military Station
Repair/maint of misc B/R works in restricted area under AGE B/R (P-1) at Faridkot Mil Stn
2023_MES_590660_1
GE FRD-18/2023-24
Open Tender
Civil Works
Item Rate
330 days
GE Faridkot
Class E Category a i
8 documents required · 8 mandatory
₹500
GE Faridkot
₹50,000
Yes
19 Jun 2023
21 Apr 2023
22 May 2023
21 Apr 2023
20 May 2023
6 May 2023
Amount
Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed
M&L for 100mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregates) as in sub base in flooring, finishing surfaces even and fair complete all as specified and directed .
M&L for hard core of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .
M&L for 75 mm thick cement concrete 1:3:6 type C2( using 40mm graded crushed stone aggregates) as in plinth protection/path, finishing surfaces even and fair complete all as specified and directed .
M&L for forming construction joints 30mm deep x 10mm wide, filled with sealing compound, grade 'A' complete all as specified and directed ..
Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed .
All as per Ser item No 07 here-in-before but except bricks.
M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 using WPC on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed . Note:- WPC shall be measured and paid separately as "Supply only"
M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for Rendering 10mm thick in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying anti rust remover on existing exposed reinforcement surfaces and applying two coats of anti rust paint after cleaning the surfaces of reinforcement complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed .
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer of cement @ 3 Kg per square metre and top layer 15mm thick in cement mortar 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately).
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed .
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of white wash complete all as specified and directed .
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of white wash complete all as specified and directed .
M&L for complete removal of existing treatment of old decorated surfaces of walls by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts, treating oil & greasy spots,filling depression to make smooth surfaces with wall care putty and applying two coats of Acrylic smooth exterior paint over and including one coat of exterior primer, using hand rollar complete all as specified and directed.
M&L for preparation of newly plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed .
M&L for preparation of old surfaces of old decorated surfaces of ceiling by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying two coats of white wash complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified and directed .
S&F Glazed ceramic coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed .
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed .
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed
M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in flooring complete all as specified and directed.
M&L for Machine cut kota stone slab flooring, 20-25 mm thick , set and jointed in cement slurry over & including 15 mm thick screed in cement mortar 1:6 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
M&L Machine cut kota stone slab 18 to 20 mm thick as in skirting,riser of steps,dado and like , set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar 1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
S&F Machine pressed precast concrete interlocking paver blocks,any shape and size, confirming to IS-15658-2006 of 60mm thickness,M-35 grade, laid with grey cement and pigment complete all as specified and directed .
M&L for sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed
M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base & mass concrete complete all as specified and directed .
S&F in repair 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .
S&F PVC (SWR) bends, any radius ,110mm bore complete all as specified and directed.
S&F in repair MS powder coated decorative drapery rod (colour as approved) 25mm dia of approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed.
Taking up or down 15mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
Taking up or down 20mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
S&F Galvanised steeI tubing,15mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
S&F Galvanised steeI tubing,20mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
S&F in repair Stop valve/angle ball, cast copper alloy,chromium plated, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 20mm bore complete all as specified and directed.
S&F in repair pillar taps,fancy type,chromium plated ,cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed
S&F in repairs Cast iron floor trap, long neck, 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .
Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
Taking down shutter of any description exc 1 sqm but n.exc 2sqm each & refixing the shutter in same opening including easing and adjusting complete all as specified and directed
Taking down old deteriorated concrete /plaster of old surfaces of facia,parapet,slab edges,projection bottom etc & applying 15mm thick rendering in cement mortar 1:3, finishing surfaces even and smooth without using extra cement including necessary scaffolding,doubing coat complete all as specified and directed. Note:-Work is to executed in buildings of height upto 15 metres and Quoted rate of the item is deemed to included the same.
S&F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed
S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed
M&L for PCC 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frames, bed blocks for fixing of hold fasts etc including necessary formwork complete all as specified and directed
S&F 30 mm thick 2nd class hard wood, plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed
S&F factory made box type steel window with side hung shutters including pintol hinges with steel handle and 2 Nos 150mm long mild steel tower bolt in each shutter,fixing lugs,peg steel stay etc complete with glazing bars dovetailed or welded complete all as specified & directed.
S&F factory made box type steel window with side hung shutters including pintol hinges with steel handle and 2 Nos 150mm long mild steel tower bolt in each shutter,fixing lugs,peg steel stay etc complete without glazing bars dovetailed or welded complete all as specified & directed.
M&L for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
S&F factory made box type steel ventilators ,fixed type with sash bars, dovetailed or welded complete all as specified & directed.
S&F Framed work such as grills, gratings etc. with ends of bars shoulderd and/or riveted, or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks,cooler stand and similar work conforming to Fe290, Gde-E-165 complete all as specified and directed.
S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .
S&F 100mm mild steel butt hinges, medium weight,cold rolled complete all as specified and directed.
S&F aluminium anodised barrel tower bolts,150 mm long of extruded section, fixed to doors with screws complete all as specified and directed .
S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .
M&L in repair for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
M&L for preparation of old steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed .
Raking out joints/pointing in cement mortar to brick work or brick tiles laid flat, in floors, surface channels, roofs etc complete all as specified and directed
M&L for flush pointing to bricks laid flat or brick tiles in pavings in floors, roofs, aprons etc in cement mortar 1:3 complete all as specified and directed .
Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and specified
M&L 40mm thick brick tiles laid on lime concrete and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over & including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed .
All as per Srl item No. 72 here-in-before but except brick tiles.
M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in roof kerbs or mud stops, rounded or chamfered angles complete all as specified and directed.
M&L for rendering 10 mm thick in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces as in roof complete all as specified and directed . Note : WPC will be measured and paid separately
Demolition of concrete (un-reinforced) as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, roof staging,sunken areas and similar suspended work complete all as specified and directed.
S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including lime concrete and connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified and directed.
S&F in repair 10 litres PVC,valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair vitreous china wash hand basin, size 550x400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings & waste pipe complete all as specified and directed .
S&F PVC connection, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair Grating doom, 100 mm dia of PTMT (minimum weight 25gms) complete all as specified and directed
S&F Towel rail, 600mm long of PTMT, fixed with and including chromium plated brass screws and wooden and plastic cleats ( minimum weight 190gms ) complete all as specified & directed
S&F in repair Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
S&F in repair Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
S&F Roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290- (Gde E -165) complete all as specified and directed
S&F in repair rolled mild steel in plates (plain or chequered) channels,square cut or notched (ordinary or counter sunk) forming holes ,without any attachment conforming to Fe-290 Gde E-165 quality ,fixed to existing steel members by welding upto height of 15m from ground level complete all as specified and directed
Demolition and breaking up drain pipe (Salt glazed stoneware, AC or Reinforced concrete) 150 mm dia set in cement mortar including demolition of haunching concrete and disposal of rubbish to a distance exceeding 1 KM but not exceeding 1.5Km complete all as specified & directed.
M&L for salt glazed stoneware drain pipe, 150 mm dia, grade 'A' ,laid in trenches ,jointed and tested in foul condition complete all as specified and directed .
M&L for Concrete bed to drain pipes using PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) including packing under haunching against the sides of pipe after laid & tested for 150mm bore of pipes complete all as specified and direced.
Excavation in trenches, not exc. 1.5 meter wide and not exc. 1.5 meter in depth, in foul condition for foundation etc and getting out in soft/loose soil complete all as specified and directed .
Returning, filling in, including spreading, leveling ,watering and well ramming in layers not exc 25cm in soft /loose soil complete all as specified and directed .
Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed
Demolition of cement concrete as in manhole foundation & bedding of sewer lines and disposal of rubbish to a distance exceeding 1 KM but not exceeding 1.5Km complete all as specified & directed.
M&L for cement concrete 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed .
M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in coping, benching of manholes and like including necessary formwork, weathering, slightly rounded or chamfered angles complete all as specified and directed.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and directed .
Cleaning of existing sewage/drain pipes of dia upto & including 250 mm , at any depth, by rodding machanically from manhole and well finishing after cleaning including getting out sludge (if any) and liquid materials from connecting manholes deposited in lines, removing the solid and sludge to any distance outside the defence land at their own cost and cost of removal shall be included in the quoted rates complete all as specified and directed .
M&L for plugging underground sewer line (150mm to 600 mm dia ) in manholes at any depth and removing the same after de-sludging of sump well/septic tank complete all as specified and directed.
Cleaning & de-slugging by mechanical means i.e. by Honeysucckers : mechanical sewage cleaning trucks / tractor etc, removing sludge from sump well / septic tank/ soakage pits / manholes etc, of any capacity and any depth, in foul condition including all necessary T & P required for removal of sludge and solid contents to be dispose off outside defence land complete all as specified and directed .
Removing blockages including cleaning of Cast iron Pipes upto and including 100mm bore from kitchen/bath/wash hand basin of any length upto gully trap by rodding/choke remover manually or other wise including refixing of oval access door covers complete all as specified and directed.
Removing blockages including cleaning of CI/SWSG Pipes upto and including 100mm bore from kitchen/bath/wash hand basin of any length from gully trap to 1st manhole by rodding/choke remover manually or other wise including refixing of oval access door covers complete all as specified and directed .
Cleaning of CI/SGSW pipe upto and including 100 mm bore from urinal/WC in any length upto gully trap/ first manhole by rodding/choke remover, manually or otherwise including refixing of oval acces door covers, removing and refixing manhole covers complete all as specified direceted.
S&F in repair CI bends, diminishing pieces or tapers, bore of pipe 75 mm complete all as specified and directed.
Dismantling CI/PVC pipe of 50/ 75/100mm dia alongwith fittings ,below or above GL/laid in floors/fixed to walls jointed in cement mortar complete all as specified and directed.
S&F 75mm dia cast iron soil, waste and vent pipe, in any length with or without ears with cement joints, laid in trenches/in floors or fixed to walls complete all as specified and directed .
All as per Ser item No 106 here-in-before but except pipe Note :- A Sum of Rs.43225.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 25 (Schedule of credit) of Tender Documents.
N.G BUILDERS
BANSAL BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .