Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹15.1 Craccepted-aoc | ₹15.1 Cr | accepted-aoc |
Tender Value
₹14.5 Cr
EMD Value
₹14.5 L
Closing Date
12 May 2026, 5:29 pmClosed
Minor Irrigation Department
EXECUTIVE EMGINEER
Construction of Series of Shirpur Pattern Check Dam, Nala Deepening & Widening and Recharge Shaft from Gonal to Bendebemballi, From Haranagera to Hothpet and From Mavinmatti to Alu-Ammapur Villages of Yadgir District (Under 4702-APB for the year 2025-26)
MI/2025-26/IW/WORK_INDENT10730/CALL-2
MI/2025-26/IW/WORK_INDENT10730/CALL-2
Open
Irrigation and Other Works
Two Tender Document System(Two Cover)
Minor Irrigation Division Kalaburagi
13 documents required · 13 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactorily completed (at least 90% of the contract value), similar nature of work from a single contract such as Construction Bridge cum Barrage/Barrage/Anicut/Check Dam of value not less than Rs. 724.58 Lakhs during the last five years (2021-22 to 2025-26). The value of the completed work shall be given a weight of 10% per year to bring them to the price level of FY 2026-27.The work done certificate should be obtained duly Signed from an Officer not below the rank of Executive Engineer of the concerned division
The intending bidder should have executed a minimum Quantity of the following Items as stated below in any one year in during last five years (2021-22 to 2025-26). The work done certificate should be obtained duly signed from an Officer not below the rank of Executive Engineer 1. Earth work (Excavation and Embankment Quantity): 261761.00 Cum 2. Cement Concrete Quantity: 7524.00 Cum 3. Reinforcement Steel: 107.480 Tonne 4. Structural Steel: 2.490 Tonne 5.Pitching/Revetment: 1616.00 Sqm
List of Existing Commitments and ongoing works in all departments
Section 3 Qualification Information as per bid document
Equipment Capabilities (a Availability by owning at least 50 percent of the required / specified key and critical equipment for this work and the remaining 50 percent can be deployed on lease/hire basis for all works provided the relevant documents (commitment agreements etc. RC Book, Sale Deed, purchase invoice, hire/lease documents with relevant hire / lease vehicles documents attached) for availability for this work are furnished below 1. Hydraulic Excavator of not less than 0.9 cum capacity 5 No. 2. Tipper of not less than 4 cum capacity 8 No. 3. Self-Loading /Transit Concrete mixer of not less than 4 Cum Capacity 3 No. 4.Roller (Static) DRR / VRR 1 No.
Liquid assets and /or availability of credit facilities of no less than Rs. 506.90 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.
Achieved in at least two financial years during last 5 years (i.e., 2021-22 to 2025-26) Minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 2898.30 Lakhs should not be less than Two times the Estimated Annual Payments under this contract. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2026-27.
Tenderers who meet the specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx1.5-B), Where A is Maximum value of civil engineering works executed in any one year during the last five years i.e.2021-22 to 2025-26 (updated to 2026-27 price level) taking into account the completed as well as works in progress. N is Number of years (0.91 years) prescribed for completion of the works for which tenders are invited. B is Value, at 2026-27 price level, of existing commitments and ongoing works to be completed during the next 0.91 years (11 Calendar months) Note: The statements showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
A copy of valid KPWD Class I registration certificate of individual bidder should be uploaded
₹7,500
₹14.5 L
5 Sept 2026
28 Apr 2026
13 May 2026
11 May 2026
8 May 2026
Nala Deepening across Gonal to Bendebembali Nala
Nala Deepening: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal o...
Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shori...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Recharge Shaft across Gonal to Bendebembali Nala
Recharge Shaft: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including se...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Earth work excavation for Foundation by mechanical means in ordinary/soft rock without blasting beyond 1.5 and up to 3.00 m depth for all works & depth upto 3 m, as per drawing and technical specific...
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, etc. complete with all lead and lift and as per the direction of the En...
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, etc. complete with all lead and lift and as per the directio...
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, etc. complete with all lea...
Providing to work spot rolling, lowering and placing in position 1200x1250 mm RCC perforated rings in the already excavated pit including loading and unloading at both the destinations etc. complete w...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Providing 160 mm 6 Kg/ Sqcm Class-3 PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level an...
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of 150 mm dia etc....
Providing and laying 100 mm thick pre-cast cover slabs over Road side drains/ utility ducts/ Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550...
Providing and laying 750 mm dia reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding ...
Check Dam-1 across Gonal to Bendebembali Nala
Check Dam-1: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setti...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per rele...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...
Providing casing embankment using semi-pervious/ pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations s...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Check Dam-2 across Gonal to Bendebembali Nala
Check Dam-2: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setti...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per rele...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...
Providing casing embankment using semi-pervious/ pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations s...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Check Dam-3 across Gonal to Bendebembali Nala
Check Dam-3: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setti...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per rele...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...
Providing casing embankment using semi-pervious/ pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations s...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Check Dam-4 across Gonal to Bendebembali Nala
Check Dam-4: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setti...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per rele...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...
Providing casing embankment using semi-pervious/ pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations s...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Nala Deepening & Widening across Haranagera to Hothpeth Nala
Nala Deepening: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal o...
Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shori...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Recharge Shaft across across Haranagera to Hothpeth Nala
Recharge Shaft: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including se...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Earth work excavation for Foundation by mechanical means in ordinary/soft rock without blasting beyond 1.5 and up to 3.00 m depth for all works & depth upto 3 m, as per drawing and technical specific...
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, etc. complete with all lead and lift and as per the direction of the En...
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, etc. complete with all lead and lift and as per the directio...
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, etc. complete with all lea...
Providing to work spot rolling, lowering and placing in position 1200x1250 mm RCC perforated rings in the already excavated pit including loading and unloading at both the destinations etc. complete w...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Providing 160 mm 6 Kg/ Sqcm Class-3 PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level an...
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of 150 mm dia etc....
Providing and laying 100 mm thick pre-cast cover slabs over Road side drains/ utility ducts/ Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550...
Providing and laying 750 mm dia reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding ...
Check Dam-1 across across Haranagera to Hothpeth Nala
Check Dam-1: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setti...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per rele...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...
Providing casing embankment using semi-pervious/ pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations s...
Fabrication, supply, erection, testing and commissioning of sliding type vertical lift gate consisting of skin plate, horizontal and vertical stiffeners, seal seats, sponge rubber seals lifting handle...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Check Dam-2 across across Haranagera to Hothpeth Nala
Check Dam-2: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setti...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per rele...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...
Providing casing embankment using semi-pervious/ pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations s...
Fabrication, supply, erection, testing and commissioning of sliding type vertical lift gate consisting of skin plate, horizontal and vertical stiffeners, seal seats, sponge rubber seals lifting handle...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Check Dam-3 across across Haranagera to Hothpeth Nala
Check Dam-3: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setti...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per rele...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...
Providing casing embankment using semi-pervious/ pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations s...
Fabrication, supply, erection, testing and commissioning of sliding type vertical lift gate consisting of skin plate, horizontal and vertical stiffeners, seal seats, sponge rubber seals lifting handle...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Check Dam-4 across across Haranagera to Hothpeth Nala
Check Dam-4: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setti...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per rele...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...
Providing casing embankment using semi-pervious/ pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations s...
Fabrication, supply, erection, testing and commissioning of sliding type vertical lift gate consisting of skin plate, horizontal and vertical stiffeners, seal seats, sponge rubber seals lifting handle...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Nala Deepening & Widening across Mavinmatti to Alu-Ammapur
Nala Deepening: Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal o...
Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shori...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Recharge Shaft across across Mavinmatti to Alu-Ammapur
Recharge Shaft: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including se...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Earth work excavation for Foundation by mechanical means in ordinary/soft rock without blasting beyond 1.5 and up to 3.00 m depth for all works & depth upto 3 m, as per drawing and technical specific...
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, etc. complete with all lead and lift and as per the direction of the En...
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, etc. complete with all lead and lift and as per the directio...
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, etc. complete with all lea...
Providing to work spot rolling, lowering and placing in position 1200x1250 mm RCC perforated rings in the already excavated pit including loading and unloading at both the destinations etc. complete w...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Providing 160 mm 6 Kg/ Sqcm Class-3 PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level an...
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of 150 mm dia etc....
Providing and laying 100 mm thick pre-cast cover slabs over Road side drains/ utility ducts/ Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550...
Providing and laying 750 mm dia reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding ...
Check Dam-1 across across Mavinmatti to Alu-Ammapur
Check Dam-1: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setti...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per rele...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...
Providing casing embankment using semi-pervious/ pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations s...
Fabrication, supply, erection, testing and commissioning of sliding type vertical lift gate consisting of skin plate, horizontal and vertical stiffeners, seal seats, sponge rubber seals lifting handle...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Check Dam-2 across across Mavinmatti to Alu-Ammapur
Check Dam-2: Earth work excavation for Foundation by mechanical means in all kinds of soils upto 3 m depth for all works & depth upto 3 m, as per drawing and technical specifications, including setti...
Earth work excavation for foundation by mechanical means in in ordinary/ soft rock without blasting upto 1.5 m depth for all works & depth upto 3 m, as per drawing and technical specifications, inclu...
Supplying, fitting and placing TMT FE550/ 550D steel reinforcement for dam & allied works including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lappi...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mi...
Providing centering, shuttering, formwork, scaffolding, etc. complete with all lead and lift and as per the direction of the Engineer-in-Charge.
Providing and laying insitu vibrated M-20 (28 days cube compressive strength not less than 20 N/ sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per rele...
Providing and constructing 75 mm dia PVC pipe weep holes for concrete/ masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate in...
Providing and constructing 300 mm thick dry rubble stone pitching with pin headers at 2 per Sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing/...
Providing casing embankment using semi-pervious/ pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations s...
Fabrication, supply, erection, testing and commissioning of sliding type vertical lift gate consisting of skin plate, horizontal and vertical stiffeners, seal seats, sponge rubber seals lifting handle...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Vol-1A.pdf
Others - DRAWINGS • 1.68 MB
VOL-3B.PDF
Others - DRAWINGS • 9.30 MB
Bid Document 10730 CALL-2.doc
Tender Document • 20.67 MB
VOL-1B.PDF
Others - DRAWINGS • 9.55 MB
VOL-3A.pdf
Others - DRAWINGS • 2.73 MB
VOL-2A.pdf
Others - DRAWINGS • 3.10 MB
Detailed_Specification.doc
Others - SPECIFICATIONS • 0.75 MB
VOL-2B.PDF
Others - DRAWINGS • 15.48 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .