Traffic Improvement and beautification works at Jawahar Circle, JDA, Jaipur, Rajasthan.

Amount

Providing & fixing Jodhpur Stone CLADDING 40 MM thick over Structural base with cement Mortar, with hairline joint at transition including cutting, rubbing and finishing, complete as per drawing and direction of Enginner- In- Charge and Architect. The Stone measurement will be done of outer most dimension of finished stone in X, Y and Z directions. The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge.

Providing and fixing Black Cadappa Cobble (4"x4"x3") Stone flooring work dressed stone (4" by 4") 3" thick in honed finished with pattern as per approved design over 25-50mm thick base in CM 1:6 including pointing with cement sand mortar 1:2 (1 Cement:2 sand) match the shade of stone with joint. The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge.

Fine dressed & machine cut edges 25-30 mm thick Black Granite flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design & drawing. The work may be done with combination of other Granite stone as per pattern given in drawing.The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge.

Fine dressed & machine cut edges 25-30 mm thick Pink Granite flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI. The work may be done with combination of other Granite stone as per pattern given in drawing.The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge.

Fine dressed & machine cut edges 25-30 mm thick Jeerawal White Granite flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing The work may be done with combination of other Granite stone as per pattern given in drawing.The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge.

Fine dressed & machine cut edges 30-35 mm thick Grey Granite (Sadarhali Stone) flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI. The work may be done with combination of other Granite stone as per pattern given in drawing.The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge.

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding , buffing, polishing and making curvature and design or pattern (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor ot the waist slab with suitable arrangement as per approval of engineer in charge. (For payment purpose only weight of S.S. Mambers shall be considered exluding fixing acessories such as nuts, bolts, fasteners, etc.)

Providing and fixing Stone jali 50mm thick in Jodhpur sand stone including carving as per ornamental design & drawing. Fixing to be done with white cement/epoxy mortar including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade. The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge.

Providing and fixing Jodhpur sand stone post having approx size 100x100mm heights 750 mm including 100mm dia gola on top of same stone as per ornamental design and drawing; and all charge like labour, charges for fixing and material required for fixing like epoxy, white cement, pigment etc. Complete in all respect as direction of engineer in charge.

Providing and executing at site mural art work with traditional architecture by synthetic paint as per design and drawing. The item should be inclusive of finished wall with birla putty (interior/exterior). The cos is inclusive of all suppeis, labour, civil work (if required ), scaffoldign, looading, unloading, and cost of molds whenever required.

Providing and Fixing 1st Class Rajasthani Marble of Super White Stone Sculpture, Column, Artifact, capital, pedestial, cornices,Pots, Kalash etc including all carving as per approved drawing and all charge like labour, charges for fixing and material required for fixing like araldite, white cement, pigment and all scaffolding required etc, Complete in all respect as direction of Engineer in charge. Stone sample to be approved by Engineer-in-charge and Architect before execution of Work.

Providing & fixing 50 mm thick 1st class Rajasthani Marble of Super White stone cladding as per drawing including shape on stone and engraving traditional shapes and engraving groove, border etc. The cladding shall of shapes and size as per the drawing including fixing at site as per directions. The cladding shall be measured net area provided and all wastage, cutting in shapes etc shall be borne by the agency.The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge. Stone sample to be approved by Engineer-in-charge and Architect before execution of Work.

Providing & fixing 40 mm thick 1st class Rajasthani Marble of Super White stone cladding as per drawing including drawing shape on stone and engraving traditional shapes and engraving groove, border etc. The cladding shall of shapes and size as per the drawing including fixing at site as per directions. The cladding shall be measured net area provided and all wastage, cutting in shapes etc shall be borne by the agency. The Cost includes all charges like material, labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge. Stone sample to be approved by Engineer-in-charge and Architect before execution of Work.

Providing & fixing railing of Rajasthani Marble of Super White marble with cement Mortar & Tinex chamical with white cement slurry mixed with pigment to match the shade of the slab as per drawing attached ,with hairline joint at transition including rubbing and finishing, complete as per direction of Enginner- In- Charge and Architect. The Stone measurement will be done of outer most dimension of finished stone in X, Y and Z directions. It includes all Cost for the scaffolding arrangement and Adhesive complete along with wastage as per direction of engineer in charge. Stone sample to be approved by Engineer-in-charge and Architect before execution of Work.

Providing & Fixing Rajasthani Marble of Super White Stone Benches (As per the Drawing) A. Dimensions (Approximate) :- Length - 1520 mm, Width - 600 mm, Height – 450 mm. The rates will be includes all charges like material (with cutting, carving, rubbing, etc), labour, fixing, scaffolding arrangement, wastage and Adhesive etc. complete in all respect as per direction of Engineer in charge. Stone sample to be approved by Engineer-in-charge and Architect before execution of Work.

P & F Gun metal statue/sculpture of any type & size as per approved drawing and placement of statue/sculpture as per direction of engineer-in-charge (composition of Gun Metal, Copper 85%, Tin 5% Lead 5% Zinc 5%.) 1: 1 Scale Model 1:1 Scale Model Shall be prepared in EPS with a final finish of POP to finalize stance and basics of required sculpture and to examine final features and shape of statue Sillicon Rubber Mold for Waxoming Mouds shall be prepared in Sillicon Rubber for further working in WAX Metal Casting Lost Wax casting process shall be applied and panel of the statue will be casting in minimum 1 to 2 pieces at our in house foundry. Average thickness of skin shall be 6 to 7 mm with composition of bronze will be Copper 75% ,Tin-10 %, Lead -10 %, Zinc -5% (Including 12% GST and Transportation and installation cost)

Providing and Fixing Banswara White Stone Sculpture including all carving as per approved drawing and all charge like labour, charges for fixing and material required for fixing like araldite, white cement, pigment and all scaffolding required etc, Complete in all respect as direction of Engineer in charge

Providing and fixing of superior quality of Rajasthani Marble of Super White Stone Chattri including pilllars, dasa, mehrab, thevi, barsot, glata, chajja, dabstone,coping, cladding, kalash, flooring , moulding of sizes as per approved drawing and design. Cost is includive of all material, stone and civil work like excavation, PCC, soling, casting of RCC dome, Plaster of dome, 3 line fine chisel dressed in C. M 1:2 including all gola , gatta work etc, labour, charges for fixing and material required for fixing like araldite, white cement, pigment and all scaffolding required etc, Complete in all respect as direction of Engineer in charge Stone sample to be approved by Engineer-in-charge and Architect before execution of Work. Stone Chattri (Size- 3.8 mx3.8m)

Providing and fixing of superior quality Rajasthani Marble of Super White Stone Chattri including pilllars, dasa, mehrab, thevi, barsot, glata, chajja, dabstone,coping, cladding, kalash, flooring , moulding of sizes as per approved drawing and design. Cost is includive of all material, stone and civil work like excavation, PCC, soling, casting of RCC dome, Plaster of dome, 3 line fine chisel dressed in C. M 1:2 including all gola , gatta work etc, labour, charges for fixing and material required for fixing like araldite, white cement, pigment and all scaffolding required etc, Complete in all respect as direction of Engineer in charge Stone sample to be approved by Engineer-in-charge and Architect before execution of Work. Stone Chattri (Size- 2.8 m x 2.8 m)

Providing and fixing of superior quality Jodhpur Stone Chattri (Coffee hut) including pilllars, dasa, mehrab, thevi, barsot, glata, chajja, dabstone,coping, cladding, kalash, flooring , moulding of sizes as per approved drawing and design. Cost is includive of all material, stone and civil work like excavation, PCC, soling, casting of RCC dome, Plaster of dome, 3 line fine chisel dressed in C. M 1:2 including all gola , gatta work etc, labour, charges for fixing and material required for fixing like araldite, white cement, pigment and all scaffolding required etc, Complete in all respect as direction of Engineer in charge. Stone Chattri (Size- 4.2 m x 4.2m)

Providing and laying/installing of RUNNING TRACK- 1). BASE LAYER- Base layer are made with tyre recycled crumb which is blended with two synthetic rubber. (Natural rubber & Styrene butadiene rubber-SBR) This base layer is for cushion purpose only. 2). TOP LAYER- Top layer is pure EPDM granules which is made with "Ethylene propylene diene monomer" with color pigment. Color are inbuilt with granules which will never loss original color. Granule standard size in 1-4 mm. Top layer of EPDM is fix of 6 mm thickness in any system. Creating any design/ logo over this EPDM surface of 6 mm only -rest is the cushion base surface. EPDM granule have high weather and heat resistance properties mainly non-toxic product. Thickness- 15mm Thick EPDM floorinh - (9mm Black base +6mm colored EPDM granules)

Providing & Fixing of Dustbin (As per the Drawing) A. Dimensions (Approximate) ;- Length - 1300 mm, Width - 500 mm, Height – 1200 mm B. Planks ;- Polystyrene Section [ 60mm X 20mm ] Finish in Wooden smooth C. Metal Frames & Structure are in Mild Steel duly powder coated. Note: 1. The Mild Steel Section of 200 mm x 8 mm round was used to grout and anchor fasten the structure on PCC base. 2. The Planks used are of 60 mm x 20 mm dimensions and were replaced from the ones mentioned in the drawings.

Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account. (a) Girth of tree shall be measured at a height of 1m above ground level. Girth of trees beyond 50cm and upto 90cm.

Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account. (a) Girth of tree shall be measured at a height of 1m above ground level. Girth of trees beyond 90cm and upto 150cm.

Providing and installing Natural landscaping sandstone block extracted directly from natural stone quarries of natural irregularties. Ideal for Feature wall, garden lanscaping; imperfection types-chipped corners, uneven surface and tapering widths; surface- rough and unfinished (including All Taxes and transportation) Size approx-Base 5'x5' ht. 8'-10- Additional variation in size upto 10% may be possible as per the instruction given by arichitect & Engineer In Charge for which no extra payment will be made.

Providing and installing of RWH system by trenching of 160mmx3m RWH pipe-PN6 with injection well with 12mm spirally perforated holes at 30 mm intervals throughout the pipe resulting to an open area of 135 square centimeter/Meter and specially designed with more tensile strength to take earth’s spherical force when it inserted in the Injection well bore. The Run off along with dirt and debries deposits in the silt trap (8 feet down from ground level/ as per site condition)and overflow of water, flows to the injection well (storage well with filtration unit- 20 feet down from ground level/ as per site condition) through a underground pipe and passes through multi-layers of filetration Media- 150mm gravel and coarse stone, 100 mmm of 20mm crushed stones, 100mm of Charcoal and Activated carbon, 50 mm of 40 mm crushed stones followed by perforated reinforced concrete slab wall tickness 75mm then 1350 mm dia X 150 mm ht X 100mm wt. heavy duty RCC ring (14 nos. or as per soil condition) after that "V" wire screen with 140mm HDPE percolated pipe (upto driling level) of 24m both ends are inserted with "V" wire screen which if filled with 10mm crushed stone. Also include trenching work and GST

CCTV & Intelligent Traffic System Note:- The CCTV Surveillance system and Intelligent Traffic system has to integrate to JDA NOC, Police Control room & Abhay Command & Control Center Jaipur. SITC of Traffic flow bullet camera For traffic analysis which Cover 3 lanes (Details specifications as per Annexure 1); Approved Makes:- Pelco, Axis, Hikvision, Prama, Vivotek or Equivalent

SITC of Strobe IR light which Support ambient brightness detection (Details specifications as per Annexure 1) Approved Makes:- Pelco, Hikvision, Prama, Vivotek or Equivalent

SITC of L2, Unmanaged, 8 Gigabit POE ports, 1 Gigabit RJ45 uplink port, 1 Gigabit SFP uplink port, 802.3af/at, PoE power budget 58w (Details specifications as per Annexure 11) Approved Makes:- Cisco, Brocade, Hikvision, Hp or Equivalent

SITC of 5MP ANPR capture Unit which is equipped with built in ANPR engine (Details specifications as per Annexure 2) Approved Makes:- Pelco, Vivotek, Hikvision, Prama or Equivalent

SITC of strobe light which is Imported high-power infrared LED (Details specifications as per Annexure 2) Approved Makes:-Pelco, Vivotek, Hikvision, Prama or Equivalent

SITC of High performance radar for speed calculation (Details specifications as per Annexure 2) Approved Makes:- Pelco, Vivotek, Hikvision, Prama or Equivalent

SITC of Terminal server for Traffic flow and SVDS (Details specifications as per Annexure 3) Approved Makes:- Pelco, Axis, Hikvision, Prama, Vivotek or Equivalent

SITC of 5 MP Varifocal Bullet Network Camera with mounting bracket (Details specifications as per Annexure 4) Approved Makes:- Pelco, Hikvision, Prama, Vivotek or Equivalent

SITC of 4MP PTZ 32X Camera with mounting bracket (Details specifications as per Annexure 1) Approved Makes:- Pelco, Axis, Hikvision, Prama or Equivalent

SITC of NVR for Bullet, PTZ (Details specifications as per Annexure 12) Approved Makes:- Pelco, Axis, Hikvision, Prama or Equivalent

SITC of 6TB Surveillance HDD in NVR Approved Makes:- Pelco, Axis, Hikvision, Prama or Equivalent

SITC of Surveillance class Common Micro SD Card 128GB for camera Approved Makes:- Hikvision, Sandisk, Samsung, Sony or Equivalent

SITC of Panic Alarm Station (Details specifications as per Annexure 7) Makes:- Pelco, Axis, Hikvision, Prama, Vivotek or Equivalent

SITC of Hybrid SAN for the central storage (Details specifications as per Annexure 8) Approved Makes:- Cisco, Hp, Hikvision, Prama or Equivalent

SITC of 6 TB enterprises HDD Approved Makes :- Seagate, WD, Sandisk, Sony or Equivalent

SITC of Video management software with E challan module and software should be from the same OEM (Details specifications as per Annexure 9) or Equivalent

SITC of Server for VMS (Details specifications as per Annexure 10) Approved Makes:- Dell, lenovo, Hp or Equivalent

SITC of 55" 4K, HDMI*2, VGA*1, USB2.0, USB3.0, build-in speaker, view angle 178'178' plastic casing, VESA, 7*24h (Details specifications as per Annexure 13) Approved Makes:- Panasonic,Samsung Hikvision, Prama or Equivalent

SITC of Web Managed 8 Gigabit PoE ports, 2 Gigabit SFP ports, 802.3af/at, PoE power budget 110W, max. 300 meter long distance PoE transmission, PoE watchdog, VLAN, QoS, SNMP, Port Mirroring, Storm Control,STP/RSTP. (Details specifications as per Annexure 14) Approved Makes:- Pelco, Axis, Hikvision, Prama or Equivalent

SITC of 6.5M hot dip galvanised dual Octagonal pole gantry structure with 190mm top dia. A/F, 220mm bottom dia. A/F, 4mm thick HT sheet, 330X330X20mm base plate; along with 22M long horizontal member for camera mounting and Supply of 8 nos of M25X800mm long J foundation bolts along with required templates for above poles. Complete in all recepect including foundation.

SITC of Entry-level Auto Barrier Gate with three year warranty, Barrier type: middle speed Lift-up speed: 3s Arm form: 4m,extensible boom pole Colour: gray Arm moving direction:Leftward Input power supply: 220V 50Hz (detailed specifications as per Annexure 15) Approved Make:- Hikvision, Godrej, Ditec or Equivalent

SITC of Anti-falling Radar with three yrs warranty, 79 GHz MMIC with higher resolution and more stable detection. Adopted with latest algorithm to filter the interference to radar from the advertising barrier, applicable to advertising barrier, fence, and straight boom pole. Able to recognize the target moving direction, applicable to mixed entrance and exit scenes. Adjustable detection distance and width with convenient operation and strong universality. Free of learning, applicable to more complex environments. Communication via RS-485 or Wi-Fi. Wi-Fi version is equipped with mobile phone application, with which you can debug and upgrade the radar with convenient operation. (detailed specifications as per Annexure 16) Approved Make:- Hikvision, Godrej, Ditec or Equivalent

SITC of Capture-trigger Radar with three yrs warranty, 79GHZ, Beam width:Vertical 34°, Horizintal 12°, relay output (detailed specifications as per Annexure 17) Approved Make:- Hikvision, Godrej, Ditec, Idemia

SITC of ANPR camera with three yrs warranty, 1/1.8 inch Progressive Scan CMOS, 1920 × 1080 at 60fps, 5.3 to 13 mm lens, ICR, support H.265, H.264,MJPEG, 3D Digital Noise Reduction, 24 V DC ± 20%, Support IR-30m,Support on-board storage up to 128 GB (TF card not included),License Vehicle detection with inbuilt independant automatic License plate recognition system working on optical character recognition technology. Camera should provide clear image of license plate along with recognized license plate no. and capture time (detailed specifications as per Annexure 18) Approved Make:- Hikvision, Godrej, Cisco, Pelco, Vivotek or Equivalent

SITC of Bracket and Pole for ANPR Camera

SITC of Power Supply 24VDC for ANPR Camera

SITC of Surveillance SD card 128GB

SITC of 4 Ports Switch with three yrs warranty, 4 Port Non-PoE Unmanaged Switch (detailed specifications as per Annexure 19) Approved Make:- Hikvision, Cisco, Brocade, Alcatel or Equivalent

SITC of Storage for ANPR with three yrs warranty, Connect Up to 8 IP Cameras, Dual OS, Up to 12 Megapixels Resolution, HDMI and VGA independent outputs provided, HDMI output with 4k output and VGA output with 2MP Output , Support H.265,H.264, MJPEG, Incoming Bandwidth 80 Mbps, 2 SATA Hard Disks, ANR Technology, 2 SATA interfaces for 2 HDDs and capacity of each HDD upto 8TB, 2 USB at least 1 × USB with 3.0, Alarm I/O 4/1, 1 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified(detailed specifications as per Annexure 20) Approved Make:- Hikvision, Cisco, Godrej, Pelco, Netapp or Equivalent

SITC of HDD (6TB) Surveillance; Seagate, Sandisk or Equivalent

SITC of VMS (detailed specifications as per Annexure 21) Approved Make:- should be from same OEM; Software for Entrance & Exit Software

SITC of Server for VMS; (detailed specifications as per Annexure 22) Approved Make:- Dell, HP, Lenovo, Netapp

Grouting, pipe laying, Installation

SITC 48 F UG Armoured OFC with splicing,termination & HDPE Duct complete in all respect as per detailed specification at Annexure-A

SITC of LIU 6F at Pole mount Outdoor rack fully loaded complete in all respect as per detailed specification at Annexure-B

SITC of LIU 96F at Control Room fully loaded complete in all respect as per detailed specification at Annexure-C

SITC of Pole Mount Outdoor Rack complete in all respect as per detailed specification at Annexure-D

SITC of 1 KVA LI UPS in Outdoor Rack complete in all respect as per detailed specification at Annexure-E

SITC of 42 U Smart Rack in Control room complete in all respect as per detailed specification at Annexure-F

SITC of 4 Armoured Cat 6 cable with Patch panel at each pole complete in all respect as per detailed specification at Annexure-G

SITC of 5 KVA online UPS in control room complete in all respect as per detailed specification at Annexure-H

SITC of Dante based Digitial audio input card for offered multichannel amplifiers.; Interface Data: Dante network audio and control data ; Format 48 kHz, 24 bit PCM; Shall support redundant connections compelte with standard accessories.Channels In 8 ,Channels Out 8, post-processing Interface-Connectors Two 1 Gb (Gigabit) Ethernet RJ-45 . Make:- Bose / Powersoft / Lab Gruppen or equivalent

SITC of Audio Output Interface Networked audio output expansion device with 4 line-level output channels, plus Emergency Message storage SITC of networked audio output expansion device with 4 line-level output channels.The audio output device shall be designed in such a manner that provide audio and control by Layer-2 protocol . It shall have Local storage of Emergency Messages in non-volatile memory, receive Power over Ethernet (PoE) utilizing a single (CAT5) network cable to a rear panel RJ45 connector. The output device shall provide four removable terminal block connectors for linelevel audio outputs, four control inputs, and four control outputs. It shall have channel-to-channel and device-to-device failover,local non-volatile storage of Emergency Messages,dual PoE capable with alternate powering from auxiliary 24V DC supply (dual inputs), Page Active Relays, Control Inputs, and Control OutputsThe audio output device shall provide local digital audio signal processing and local storage of configuration data,signal processing including volume control, filters, compressor/limiting, delay, speaker equalization. The audio output device shall indicate signal and clip with LEDs on the front panel. Make :-Biamp/Baidwin Boxall, Mediamatrix or equivalent

SITC of "Message Server Enhanced Networked Messaging Processor SITC of networked messaging processor. The Playing live & Pre-recorded server shall networked based & to be rack mountable in one rack space (1RU) and shall support advanced paging functionalities such as recorded message storage and playback, system configuration storage, event scheduling, time server support, storage of logged system data, VoIP triggered paging, email notification, and remote third party control capability. The processor shall feature a status LED and separate ports for TCP/IP Control and networked based Layer-2 or above protocol . The message Server shall be CE marked and shall be compliant with the RoHS directive.Make :-Biamp/Baidwin Boxall, Mediamatrix or equivalent

SITC of "Paging Station Emergency Wall-mounted Paging Station, 10 Buttons with hand-held microphone (EN 54-16 certified) SITC of EN 54-16 certified wall-mounted paging station to provide paging audio and network control data via network cable and using PoE power from RJ-45 connector. It shall have 10 or more buttons with mutliple functions e.g .direct page ,zone recall etc. It shall provide multi level paging priorities functions and facility for override, store and forward, and keypad lock-out . It shall have inbuilt DSP ,data storage. It should have LED/LCD backlit screen, access via special code ,sutiable to work in high noise area with inbuilt noise-cancelling microphone. It shall be CE, RoHS compliant and EN 54-16 certified. Make :Biamp/Baidwin Boxall, Mediamatrix or equivalent

Audio Input Interface Networked audio input device with 6 channels of BGM or user configurable mic/line audio SITC of networked audio input expansion device .The audio input device shall provide audio and control via networked based Layer-2 or above protocol. It shall receive Power over Ethernet (PoE). The audio input device shall provide four sets of dual RCA connectors plus removable terminal block connectors for line-level inputs, two microphone/line inputs with phantom power, four paging inputs, six Rj45 outputs, four control inputs, and four control outputs. Software-configurable local audio signal processing including gain, filters, and compressor/limiter. The input device shall indicate signal and clip with LEDs on the front panel. The input device shall be CE marked and shall be compliant with the RoHS directive. Make :Biamp/Baidwin Boxall, Mediamatrix or equivalent

SITC of "Audio Player Versatile DAB+ and FM RDS / CD / USB / SD-card /Bluetooth music source, RS232 control, IR remote included, 1U, 19"" SITC of professional multisource CD/USB/SD-card music player with unbalanced outputs 2 x RCA + COMBI RCA, integrated FM RDS and tuner with RS232 control, IR remote included, rack mountable. Make :-Samsung, Sony,Apart or equivalent

SITC of Customized Console- Weatherized Temperature Controlled Rack-9U. Make:Cosmotech/Netrack/president/WQ/Hvlast or Equivalent

SITC of Equipment Rack - 42U Rack Frame/600X800/Steel/NRS1/ CKD/Casters Type 2,Levellers,Server /IT Rack mount power distribution unit, 1Ph, 230V, 32A, 50/60Hz, Zero U standard with 12 X Indian Round Pin 5/15A, (Inlet Plug Not Installed, Recommended IEC30932A 2P +E), 16A MCB X 2 Circuits- PDU Rating 7.3KVA/Bottom feed-3Mt/ Black ,ITE / Server Rack Air Circulation module/Tower Mount/360CFM,Mounting Hardware-CR (Pack of 20) Make:Cosmotech/Netrack/president /WQ/Hvlast or Equivalent

SITC of Rack Finishing- with OFC Termination Make: Aksh, Molex,D-link or Equivalent

SITC of 8 x 10/100/1000T ports (POE) 4 x 100/1000x SFP Industrial L3 Switch. Make santelequip/Moxa/hirschmann /Cisco/Alcatel or Equivalent

SITC of 8 x 10/100/1000T ports (POE) 2 x 100/1000x SFP Combo Industrial Managed Switch Make :santelequip/Moxa/hirschmann /Cisco/Alcatel or Equivalent

SITC of 1000BaseLX SFP (10km) of Reputed Make

SITC of LIU Single Mode with Piggtail and Adapter (Patch Panel for core with inbuilt pigtails) The 1U Multi‐Function Fibre 24 Enclosure is a configurable rack mount unit for storing and terminating incoming fibre cable. The fibre enclosure has been designed to accommodate various termination types and adapter configurations The enclosure must, have a sliding drawer for ease of reconfiguring fibres, ncorporatesaheavydutyballbearingslidemechanism,allowingeasyaccessto fibres Theadapterplatesmustbeaninterchangeablefrontplatewhichcanfacilitates upgrades as & when required. The enclosure/ LIU should have locks to secure all the fiber terminations & must have front cable management to properly route patch cords. Fibre management enclosures that can be used as a wall mount enclosure for isolated applications or rack mount enclosure for integrated applications. 1.75 inches The LIU must be upgradable up 96 ports LC Style 482mm W x 254mm D x 43mm H( Rackmount) 305mm W x 254mm D x 43mm H (Wallmount Powder coated Mild Steel . make-Molex/panduit/simon/Aksh or Equivalent

SITC of Speaker Cable 4sqmm armoured 2 core CABLE DESCRIPTION - 2 core X 4.00 Sq. mm (128/.20mm) ATC Copper conductor PVC Insulated, PVC inner sheath, G.I. wire (0.9 mm) Armoured,Over all PVC Sheathed Speaker Cable. PHYSICAL SPECIFICATIONS:- • Cross Sectional Area : 4.00 Sq. mm,• No. of Strands : 128 Strands • Size of Strand : 0.20 mm / 36 SWG / 32 AWG• Conductor Type : ATC Copper • Core Diameter : 4.20 mm• GI wire : 0.9 mm• Insulation Type : PVC Compound • Outer Sheath Type : PVC Compound• Overall OD : 14.70 mm + 0.20 mm TECHNICAL SPECIFICATIONS:- • Operating Voltage : 1100 Volts• Current Carrying Capacity : 26 Amps. • Nominal Capacitance- Cond. / Cond. : 62 pF / Feet- Cond. / Shield : 165 pF / Feet • Nom. Cond. DC Resistance- Conductor : 4.88Ω / Km at 20º C ELECTRICAL PROPERTIES • Volume resistivity : 1x1014 ohm / cm at 27 0 C• Dielectric constant : 3.9 at 1000 Hz Make:Krystal/ belden/klotz or Equivalent

SITC of Weather Proof Junction Boxes

SITC of 12ft height Pole for mounting of speaker

SITC of Speaker Brackets with monkey protection unit.

SITC of T-Junction Coupler

SITC of Joint Closures 12F .

SITC of SS Hose Clamps

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.ISI : Mark

Supply , installation testing and commissioning of 9M height four arm Pole Made in combination of continous Conical tapper section (6000 mm length minimum) which is fabricated using High tensile MS Sheet (3mm thick) with top dia. 80-90mm minimum & bottom 140-155 dia. Minimum 1.7M height four arm ornamental designed bracket made in combination of mild steel pipe sections 60mm dia. x 2.6mm thick & 38mm dia x 2mm thick. Decorative part made in combination of gravity cast aluminium to get horizonal arm length as shown in drawing with pleasing aesthetics. The brackets shall be a single piece assembly and should be capable of orientation in any direction and secured with stainless steel 304 grade allen grub screws. Decorative ring between base pole and bracket is made of cast iron. Decorative finial top is made of cast iron in single piece of min. height 250mm. The decorative base is made of Gravity cast aluminium with the company / brand logo embossed on it. With minimum dia of the base is 500 mm & height is 1250mm. All dimension are within +/- 5% tolerance. Cast aluminium material is LM6 grade. Cast iron-Material-Grey Iron & Grade-FG 200. The pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedestal to be mounted on a suitable size steel plate. The pole is to be provided with a surface mounting suitable base plate (steel of grade E250 to IS 2062 : 2011) and welded at the bottom of the pole with supporting gussets. The mounting plate shall be provided with elongated holes for alignment of the pole with suitable hot dip GI foundation bolts and nuts (Grade 4.6). The pole shall be coated zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane base paint (coating thickness - 80 microns minimum), including foundation of pole . Final design in concurance with the Engineer in-charge. Complete in all recepect as per enclose Drawing -Annexure- AA

Supply, Installation testing and Commmisioning of A modern heritage pathway luminaire, integral model, totally weather proof aesthetically contoured. Improved long lasting protection against ingress of dust / moisture / insects inside optical compartment with top opening facility for maintenance. Streamlined aerodynamic profile for lesser resistance. Luminaire comprises of specially contoured spun aluminium body. Non yellowing, UV stabilised, convex type acrylic diffuser. Luminaire Ø600 and height 600mm. Suitable for mounting to internally threaded pipe of designation M30. Supplied with wattage of 100W. System efficacy 100 lm/W minimum, The value shall not exceed junction temperature Tj 85°C, Luminaire body temperature should not exceed 30°C, CRI >70, different CCTs, life span of L70 / B10 @ 50000 Hrs, SDCM ≤ 3, Type III light distribution, Operating Temperature 0°C~45°C, Input Voltage 230-240V ac, Operating voltage 100-277V ac with cut-off protection and self restart feature in case of over / under voltage and phase to phase voltage, driver efficiency > 85%, frequency 50-60Hz, Power factor >0.9, 6KV surge protection, THD <10%, IP65 protection, CE /BIS Conformity.

Supply , installation testing and commissioning of 6M height twin arm Pole Made in combination of continous Conical tapper section (3500 mm length minimum) which is fabricated using High tensile MS Sheet (3mm thick) with top dia. 80-90mm minimum & bottom 120-130 dia. Minimum 1.5M height twin arm ornamental designed bracket made in combination of mild steel pipe sections 60mm dia. x 2.6mm thick & 38mm dia x 2mm thick. Decorative part made in combination of gravity cast aluminium to get horizonal arm length as shown in drawing with pleasing aesthetics. The brackets shall be a single piece assembly and should be capable of orientation in any direction and secured with stainless steel 304 grade allen grub screws. Decorative ring between base pole and bracket is made of cast iron. Decorative finial top is made of cast iron in single piece of min. height 250mm. The decorative base is made of Gravity cast aluminium with the company / brand logo embossed on it. With minimum dia of the base is 500 mm & height is 1250mm. All dimension are within +/- 5% tolerance. Cast aluminium material is LM6 grade. Cast iron-Material-Grey Iron & Grade-FG 200. The pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedestal to be mounted on a suitable size steel plate. The pole is to be provided with a surface mounting suitable base plate (steel of grade E250 to IS 2062 : 2011) and welded at the bottom of the pole with supporting gussets. The mounting plate shall be provided with elongated holes for alignment of the pole with suitable hot dip GI foundation bolts and nuts (Grade 4.6). The pole shall be coated zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane base paint (coating thickness - 80 microns minimum), including foundation of pole. Final design in concurance with the Engineer in-charge. Complete in all recepect as per enclose Drawing--Annexure- AA

Supply , installation testing and commissioning of A modern heritage pathway luminaire, integral model, totally weather proof aesthetically contoured. Improved long lasting protection against ingress of dust / moisture / insects inside optical compartment with top opening facility for maintenance. Streamlined aerodynamic profile for lesser resistance. Luminaire comprises of specially contoured spun aluminium body. Non yellowing, UV stabilised, convex type acrylic diffuser. Luminaire Ø400 and height 400mm. Suitable for mounting to internally threaded pipe of designation M30. Supplied with wattage of 30W. System efficacy 100 lm/W minimum, The value shall not exceed junction temperature Tj 85°C, Luminaire body temperature should not exceed 30°C, CRI >70, different CCTs, life span of L70 / B10 @ 50000 Hrs, SDCM ≤ 3, Operating Temperature 0°C~45°C, Input Voltage 230-240V ac, Operating voltage 100-277V ac with cut-off protection and self restart feature in case of over / under voltage and phase to phase voltage, driver efficiency > 85%, frequency 50-60Hz, Power factor >0.9, THD <10%, IP65 protection, CE/ BIS Conformity.

Supply, Installation and Commisioning of 4.2M height single arm pole made in combination of circular pipe (2500 mm length minimum) which is fabricated using 88.9mm dia x 2.9 thick. Minimum 1M height single arm ornamental designed bracket made in combination of mild steel pipe sections 60mm dia. x 2.6mm thick & 38mm dia x 2mm thick. Decorative part made in combination of gravity cast aluminium to get horizonal arm length as shown in drawing with pleasing aesthetics. The brackets shall be a single piece assembly and should be capable of orientation in any direction and secured with stainless steel 304 grade allen grub screws. Decorative ring between base pole and bracket is made of gravity cast aluminium. Decorative finial top is made of cast iron in single piece of min. height 250mm. The decorative base is made of Gravity cast aluminium with the company / brand logo embossed on it. With minimum dia of the base is 300mm & height is 570mm. All dimension are within +/- 5% tolerance. Cast aluminium material is LM6 grade. The pole should be provided with an inbuilt junction box to fix two way connecto and 6A MCB at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedestal to be mounted on a suitable size steel plate. The pole is to be provided with a surface mounting suitable base plate (steel of grade E250 to IS 2062 : 2011) and welded at the bottom of the pole with supporting gussets. The mounting plate shall be provided with elongated holes for alignment of the pole with suitable hot dip GI foundation bolts and nuts (Grade 4.6). The pole shall be coated zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane base paint (coating thickness - 80 microns minimum), including foundation of pole. Final design in concurance with the Engineer in-charge. Complete in all recepect as per enclose Drawing--Annexure- AA

Supply, Installation and Commisioning of A modern heritage pathway luminaire, integral model, totally weather proof aesthetically contoured. Improved long lasting protection against ingress of dust / moisture / insects inside optical compartment with top opening facility for maintenance. Streamlined aerodynamic profile for lesser resistance. Luminaire comprises of specially contoured spun aluminium body. Non yellowing, UV stabilised, convex type acrylic diffuser. Luminaire Ø280 and height 250mm. Suitable for mounting to internally threaded pipe of designation M20. Supplied with wattage of 24W. System efficacy 100 lm/W minimum, The value shall not exceed junction temperature Tj 85°C, Luminaire body temperature should not exceed 30°C, CRI >70, different CCTs, life span of L70 / B10 @ 50000 Hrs, SDCM ≤ 3, Operating Temperature 0°C~45°C, Input Voltage 230-240V ac, Operating voltage 100-277V ac with cut-off protection and self restart feature in case of over / under voltage and phase to phase voltage, driver efficiency > 85%, frequency 50-60Hz, Power factor >0.9, THD <10%, IP65 protection, CE/BIS Conformity.

Supply , installation testing and commissioning of 4.2M height single arm pole made in combination of circular pipe (4000 mm length minimum) which is fabricated using 88.9mm dia x 2.9 thick. Decorative part made in combination of gravity cast aluminium to get horizonal arm length as shown in drawing with pleasing aesthetics. The sleeve shall be a single piece assembly and should be capable of orientation in any direction and secured with stainless steel 304 grade allen grub screws. Decorative ring between base pole and bracket is made of gravity cast aluminium. Decorative finial top is made of cast aluminium in single piece of min. height 180mm. The decorative base is made of Gravity cast aluminium with the company / brand logo embossed on it. With minimum dia of the base is 300mm & height is 570mm. All dimension are within +/- 5% tolerance. Cast aluminium material is LM6 grade. The decorative pedestal to be mounted on a suitable size steel plate. The pole is to be provided with a surface mounting suitable base plate (steel of grade E250 to IS 2062 : 2011) and welded at the bottom of the pole with supporting gussets. The mounting plate shall be provided with elongated holes for alignment of the pole with suitable hot dip GI foundation bolts and nuts (Grade 4.6). The pole shall be coated zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane base paint (coating thickness - 80 microns minimum), including foundation of pole. Final design in concurance with the Engineer in-charge. Complete in all recepect as per enclose Drawing--Annexure- AA

Supply, Installation testing and Commissioning of 3W Luminaire housing and top ring is made of die-cast alminium which has high resistance against corrosion. Mounting spike is made of polypropylene material. Clear tempered safety glass, swivel range of the luminaire in the horizontal axis 0°-90°, supplied with 1m cable length, Supplied with wattage of 3W, IP67 connector, silicone gasket, CRI ≥80, life span of L70 / B10 @ 60000 Hrs, SDCM ≤3, Beam angles of 15°/25°/40°, constant current integral power supply, PF>0.9, THD <10%, 2kv Surge protection, efficiency upto 80%, IP65 protection & CE conformity. Finish to be pure polyster powder coated as per acrhitect color scheme .As per Architectural design requirement and complete in all respects .

Supply, Installation testing and Commissioning of 6W Luminaire housing and top ring is made of die-cast alminium which has high resistance against corrosion. Mounting spike is made of polypropylene material. Clear tempered safety glass, swivel range of the luminaire in the horizontal axis 0°-90°, supplied with 1m cable length, Supplied with wattage of 6W, IP67 connector, silicone gasket, CRI ≥80, life span of L70 / B10 @ 60000 Hrs, SDCM ≤ 3, Beam angles of 15°/25°/40°, constant current integral power supply, PF>0.9, THD <10%, 2kv Surge protection, efficiency upto 80%, IP65 protection & CE conformity. Finish to be pure polyster powder coated as per acrhitect color scheme .As per Architectural design requirement and complete in all respects .

Supply ,installation testing and commissioning, of 12W Luminaire housing, top ring and mounting bracket is made of die-cast alminium which has high resistance against corrosion. Clear tempered safety glass, swivel range of the luminaire in the horizontal axis 0°-90°, supplied with 1m cable length, Supplied with wattage of 12W, IP67 connector, silicone gasket, CRI ≥80, life span of L70 / B10 @ 60000 Hrs, SDCM ≤ 3, Beam angles of 15°/25°/40°, constant current integral power supply, PF>0.9, THD <10%, 2kv Surge protection, efficiency upto 84%, IP65 protection & CE conformity. Finish to be pure polyster powder coated as per acrhitect color scheme .As per Architectural design requirement and complete in all respects .

Supply , installation testing and commissioning of IP65 safety class 1, BIS certified bollard made up of Extruded aluminium column with die-cast aluminium flat top cover ,(grade 6063) with die cast AL componment and non corrosive SS fasterner .. Cast iron /AL plate to be provide for bolting and foundation . 15W bollard of Ø166 x 895mm, with lumen output of 673lm(WW), creating a pleasant light distribution with high degree of visual comfort . Finish to be pure polyster powder coated as per architectural design requirement. Luminaire prewired with LED driver and suitable for operation on 240V, 50Hz single phase ac supply.

Supply and Installation testing and commissioning of Outdoor LED luminarie IP65 CE marked certified surface /wall mounted High pressure die-cast aluminium housing consisting of High efficiency optical lens with clear diffuser, die-cast Aluminium supporting base, EPDM gasket for leakproof structure design, Cable entries for through-wiring of mains supply cable consisting of Integral power supply compatable with lighting management system and mounting screws of stainless steel. As per architectural design requirement and complete in all respects .Wall and surface-mounted luminaire with 3000K LED,6W having lumnes upto 221lm, 360˚ optics. Prewired with driver and suitable for operation on 240V, 50Hz single phase ac supply as per Architectural design requirement and complete in all respects.

Supply , Installation testing and Commissioning of CE/BIS marked 24V IP67 High-Grade Vertical bend flexible Linear strip with reflective, white surface and 3M adhesive tape on the back. Diffuser / Protection Polyurethane Encapsulation to achieve IP67 rating. Having 60° beam angle. CRI >80.Water & UV resistant flexible linear LED luminaire. Having atleast 9W/mtr and upto 80lm/W ,Complete with power supply , connectors ,end caps complete in all respects .As per Architectural design requirement and complete in all respects.

Supply ,installation testing and commissioning, Luminaire housing, top ring and mounting bracket is made of die-cast alminium which has high resistance against corrosion. Clear tempered safety glass, swivel range of the luminaire in the horizontal axis 0°-90°, supplied with 1m cable length, Supplied with wattage of 6W, IP67 connector, silicone gasket, CRI ≥80, life span of L70 / B10 @ 60000 Hrs, SDCM ≤ 3, Beam angles of 15°/25°/40°, constant current integral power supply, PF>0.9, THD <10%, 2kv Surge protection, efficiency upto 84%, IP65 protection & CE conformity. Finish to be pure polyster powder coated as per acrhitect color scheme .As per Architectural design requirement and complete in all respects .

Supply ,installation testing and commissioning In-Ground drive over luminaire housing is made of die-cast aluminium and top front ring is made of hard chromeplated stainless steel 316 grade with high resistance against corrosion. Molding shaped silicone gasket which fits between housing and top ring. IP68 PG-11 cable gland is used to protect luminaire from water ingress. Luminaire is supplied with hard wired 3 x 0.5mm2 cable of 1m length. Supplied with system wattage of 6W with tiltable option. CRI ≥80, different CCTs, life span of L70 / B10 @ 60000 Hrs, SDCM ≤ 3, Beam angle of 20°, Step temper clear 8mm thk. glass, Integral constant current power supply, PF>0.9, THD <10%, 2kv Surge protection, efficiency upto 84%, to be Supplied with mounting sleeve for preparing recessed opening inground.ABS recess mounting sleeve. CE/BIS conformity.

Supply, Installation testing and Commissioning of 6m Conical Decorative pole Surface mounting continuosly tapered conical steel lighting pole of total height 6 meters ove ground. with decorative ornament;al Gravity Cast aluminium base of Dia:>420mm, & Ht:>470mm. Decorative brackets made of single cast aluminium which can be aligned to desired location as per architects design. Additional basket can be provided on request as per approved design. The pole shall be provided with built-in control box with cast aluminium service door and a safety chain. The control gear tray is to be prewired with Ramanuj 4 way connector for loop-in loop-out arrangement and Siemens / Crabtree make MCB & connector. The gear tray wiring shall be with 2.5 sqmm copper cable. The wiring will be limited to gear tray only. Foundation Base Plate :The Pole is to be provided with a surface mounting base plate of size 250 x 250 x 12 mm, (steel of grade E250 to IS 2062 : 2011) and welded at the bottom of the pole with supporting gussets. The mounting plate shall be provided with elongated holes (38 x 19) for alignment of the pole to suit M16 Bolt at CC 180.. Finish :The Pole is to be coated with an epoxy zinc rich penetrating primer 45 microns thick and finished with polyurethane base paint for a long lasting finish with 45 microns coat in required colour. Accessories: Hot dip GI foundation bolts and nuts (Grade 4.6) are to be supplied with the poles. Complete in all recepect including foundation of pole as per enclose Drawing--Annexure- AA

Supply, Installation testing and Commissioning of 2.6M height triple arm, highly designed and ornate sculptural lighting piece made in aluminium (2500 mm length minimum). The decorative base is made of cast aluminium with minimum base width of 720mm & height is 620mm. Shaft made of continously tappered aluminium grooved design and two decorative single piece of aluminium bracket. All dimension are within +/- 5% tolerance. The decorative pedestal to be mounted on a suitable size steel plate. The pole is supported by an internal structural steel shaft and to be provided with a surface mounting suitable base plate (steel of grade E250 to IS 2062 : 2011). The mounting plate shall be provided with elongated holes for alignment of the pole with suitable hot dip GI foundation bolts and nuts (Grade 4.6). The pole shall be coated zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane base paint (coating thickness - 80 microns minimum), including foundation of pole. Final design in concurance with the Engineer in-charge. Complete in all recepect as per enclose Drawing--Annexure- AA

Supply , installation testing and commissioning of A modern heritage post top luminaire, integral model, totally weather proof aesthetically contoured. Improved long lasting protection against ingress of dust / moisture / insects inside optical compartment. Luminaire made of gravity cast aluminium body. Non yellowing, UV stabilised, acrylic diffuser. Luminaire width 450mm and height 800mm. Suitable for mounting on 60mm OD Pipe. Supplied with wattage of 30W. System efficacy 100 lm/W minimum, The value shall not exceed junction temperature Tj 85°C, Luminaire body temperature should not exceed 30°C, CRI >70, different CCTs, life span of L70 / B10 @ 50000 Hrs, SDCM ≤ 3, Operating Temperature 0°C~45°C, Input Voltage 230-240V ac, Operating voltage 100-277V ac with cut-off protection and self restart feature in case of over / under voltage and phase to phase voltage, driver efficiency > 85%, frequency 50-60Hz, Power factor >0.9, THD <10%, IP65 protection, CE/ BIS Conformity.

Supplying and fixing of 25mm Foam jet made out with gunmetal with chrome plated Achive water effect ht upto 0.5-0.6 mtr. high make - Color Design India/Oase/H2O or equivalent as per entire instruction, direction and satisfaction of Engineer-in-charge.

Supplying and fixing of 25mm Ball joint for foam jet made out with gunmetal with chrome plated. make - Color Design India/Oase/H2O or equivalent as per entire instruction, direction and satisfaction of Engineer-in-charge.

Supplying and Fixing of 25mm dia. Gunmetal Ball Valve (Make Zoloto/Sant/Leader/Arch) complete as per per the direction and entire satisfaction of Engineer in Charge

Supplying and Fixing of 40mm dia. Gunmetal Ball Valve (Make Zoloto/Sant/Leader/Arch) complete as per per the direction and entire satisfaction of Engineer in Charge

Supplying and fixing of 50 mm dia GI B class circular shaped ring having size of 3.1 mtr. arch shaped for foam jet water effect with 7 nos. 25 mm dia socket welded and 50mm dia. socket 1 no. for inlet connection including bending /threading/ fixing/welding complete. All fixing to be done as per direction, instruction and entire satisfaction of Engineer-in-charge.

Supplying installation testing and commissioning of horizontal monoset submersible Pump Set with Starter and totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI Pump Body : CI Make : Kirlosker/Crompton/CRI or equivalent Capacity : 2 HP Three Phase Discharge 12 LPS Head 6 Mtr Suction & Delivery 65x50mm

Supply & Fixing water proof high power LED lights 18 watts, color changing/RGB made out of san top with ABS base suitable protection class of IP-68. (Color Design India/Oase/H2O or equivalent) complete as per the direction & entire satisfaction of Engineer in charge.

Supply & Fixing of Master Control Device for LED Lights having Specifications:- * PIC based controller with master & slave communication protocol. * Push feature to lock any running colour chase to a fix colour. * 24 Pre-Programmed colour patterns and Load Circuit-Inbuilt with accessories complete, Body - Plastic/PVC, Output Power - 18V DC, Make : - (Color Design India/Oase/H2O or equivalent) complete as per the direction & entire satisfaction of Engineer in charge.

Supply and fixing of Power Supply (PS) 3A suitable for 18Watt LED lights (Color Design India/Oase/H2O or equivalent) as per the direction and entire satisfaction of Engineer in Charge.

Supplying installation, testing and commissioning of Starter for 2HP/3Phase Pumpset, Make kirloskar/L&T/ABB or Equivalent as per the direction and entire satisfaction of Engineer in Charge.

Supplying and fixing 3x 2.5 sqmm round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/Havells or equivalent for filter pumps (a) 3 x 2.5 sq mm size.

Supplying and fixing 4 x 2.5 sqmm submersible Round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/Havells or equivalent for RGB LED Lights complete. (b) 4X2.5 sq mm size.

Supplying and fixing PVC Medium Class conduit pipe for concealing of Cables make Kalinga/AKG or equivalent /ISI Mark (e) 25 mm size.

Supplying and Making water Proof joint of underwater cables for submersible cable complete as required.

Supplying and 65mm dia. Debris Collection Stainers in Stainless Steel 304 grade complete as required.

SITC of UPVC pipes (10 Kgf/cm2) of make supreme / Prince or equivalent confirming to IS 4985:2000 including all UPVC fitting tested to a test pressure of 10 Kgf/sqcm i/c jointing with good quality solvent of following sizes. All fixing to be done to the entire satisfaction and sample approved by Engineer-incharge. 63 mm OD Pipe (for delivery)

50 mm OD Pipe (for overflow and drain)

32 mm OD Pipe (for inlet)

SITC of 50 mm dia CI Butterfly Valve of pressure rating PN1.6 with EPDM rubber lining matching flanges and accessories complete short pattern as required (Kirloskar/leader/Zoloto/Sant or equivalent) as per per the direction and entire satisfaction of Engineer in Charge.

Supply and fixing of 50 mm dia Non return Valve and accessories complete. Make - Sant/Leader/HVI/Zoloto or equivalent

Supplying and fixing of 50 mm dia diffusers for water overflow to bowls made out with stainless steel 304 grade body having size of 1 mtr. long. make - Color Design India/Wet design/Oase/H2O or equivalent and as per entire instruction, direction and satisfaction of Engineer-in-charge.

Supplying and Fixing of 40mm dia. Gunmetal Ball Valve (Make Zoloto/Sant/Leader/Arch or equivalent) complete as per per the direction and entire satisfaction of Engineer in Charge

Supplying and Fixing of 50mm dia. Gunmetal Ball Valve (Make Zoloto/Sant/Leader/Arch or equivalent) complete as per per the direction and entire satisfaction of Engineer in Charge

Supplying installation testing and commissioning of horizontal monoset submersible Pump Set with Starter and totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI Pump Body : CI Make : Kirlosker/Crompton/CRI or equivalent Capacity : 2 HP Three Phase Discharge 11 LPS Head 8 Mtr Suction & Delivery 65x50mm

Supply & Fixing water proof high power LED lights 6x3=18 watts, single color warm white made out of stainless steel 304gr. suitable to be fitted with emitter type power LED's with all in one optical lens of 85% effeciency step pempered glass 8 mm with protection class of IP-68. (Color Design India/Wet design/Oase/Wet design/Oase or equivalent) complete as per the direction & entire satisfaction of Engineer in charge.

Supply & Fixing adjustable stainless stand (SS-304)/housing for LED lights with all accessories including nuts bolts complete as required for jet nozzle (Color Design India/Wet design/Oase/Wet design/Oase or equivalent) etc complete as per the direction & entire satisfaction of Engineer in charge.

Supply and fixing of Constant Voltage Driver (CVD) 40A suitable for 54Watt and 18Watt LED lights (Color Design India/Wet design/Oase/Wet design/Oase or equivalent) as per the direction and entire satisfaction of Engineer in Charge.

Supplying and fixing 3x 2.5 sqmm round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/Havells or equivalent for filter pumps (a) 3 x 2.5 sq mm size.

Supplying and fixing 4 x 2.5 sqmm submersible Round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/Havells or equivalent for RGB LED Lights complete. (b) 4X2.5 sq mm size.

Supplying and fixing 3x 6.0 sqmm round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/Havells or equivalent for filter pumps (c) 3 x 6.0 sq mm size.

Supplying and fixing PVC Medium Class conduit pipe for concealing of Cables make Kalinga/AKG or equivalent/ISI Mark (d) 25 mm size.

Supplying and Making water Proof joint of underwater cables for submersible cable complete as required.

Supplying and 50mm dia. Debris Collection Stainers in Stainless Steel 304 grade complete as required.

Supplying and Fixing of UPVC pipes (10 Kgf/cm2) of make supreme / Prince or equivalent confirming to IS 4985:2000 including all UPVC fitting tested to a test pressure of 10 Kgf/sqcm i/c jointing with good quality solvent of following sizes. All fixing to be done to the entire satisfaction and sample approved by Engineer-incharge. 63 mm OD Pipe

50 mm OD Pipe

Supplying and fixing of 50 mm dia CI Butterfly Valve of pressure rating PN1.6 with EPDM rubber lining matching flanges and accessories complete short pattern as required (Kirloskar/leader/Zoloto/Sant or equivalent) as per per the direction and entire satisfaction of Engineer in Charge.

Supply and fixing of 50 mm dia Non return Valve and accessories complete. Make - Sant/Leader/HVI/Zoloto or equivalent

Supplying installation testing and commissioning of Single Phase horizontal monoset submersible Pump Set with Starter and totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI Pump Body : CI Make : Kirlosker/Crompton/CRI or equivalent Capacity : 2 HP Single Phase Discharge 11 LPS Head 8 Mtr Suction & Delivery 65x50mm

Supplying and Fixing of TOTALLY ANTI-CORROSIVE Bobbin wound + Fibre Glass filter. Fitted with pressure gauge panel, manual air bleeder, water drain and emptying plug.fitted with collector arms and diffuser made from unplasticized PVC and polypropelene. Maximum working pressure : 2.5 kg/cm². Diameter : 900mm/36". Velocity 28 Cub mtr/Hr, cap. 31,200 Ltr/hr. Make - Emaux/ACL/Pentolex or equivalent

Supplying and fixing of Granular sand media for sand Filter

Supply and fixing of 50mm dia. Wall return jets for delivery line of sand filter inside waterbody as per direction, instruction and entire satisfaction of Engineer-in-charge.Make - Emaux/ACL/Pentair or equivalent

Supply and fixing of Manifold made out of GI jindal B class or equivalent in size of 100mm Dia and 900 mm in Length complete as per the direction & entire satisfaction of Engineer in charge.

Supply and fixing of waterpond disinfection system/chlorine dosing system for delivery line of sand filter as per direction, instruction and entire satisfaction of Engineer-in-charge. Make - Emaux/ACL/Pentair or equivalent

Supplying and fixing of 40 mm dia Foam Jet Nozzle made out with gunmetal with chrome plated body, make - Color Design India/Wet design/Oase/H2O or equivalent and as per entire instruction, direction and satisfaction of Engineer-in-charge.

Supplying and fixing of 40 mm dia Spout Jet Nozzle made out with gunmetal with chrome plated fixed inside elephant trunk, body, make - Color Design India/Wet design/Oase/H2O or equivalent and as per entire instruction, direction and satisfaction of Engineer-in-charge.

Supplying and fixing of 50 mm dia diffusers for water overflow to bowls made out with stainless steel 304 grade body having size of 1 mtr. long. make - Color Design India/Wet design/Oase/H2O or equivalent and as per entire instruction, direction and satisfaction of Engineer-in-charge.

Supplying and fixing of 40 mm dia header for Chhatri made out with stainless steel 304 grade body having size of 0.9 mtr. Long with water curtain nozzles 18 nos. make - Color Design India/Wet design/Oase/H2O or equivalent and as per entire instruction, direction and satisfaction of Engineer-in-charge.

Supplying and Fixing of 40mm dia. Gunmetal Ball Valve (Make Zoloto/Sant/Leader/Arch or equivalent) complete as per per the direction and entire satisfaction of Engineer in Charge

Supplying and Fixing of 50mm dia. Gunmetal Ball Valve (Make Zoloto/Sant/Leader/Arch or equivalent) complete as per per the direction and entire satisfaction of Engineer in Charge

Supplying installation testing and commissioning of horizontal monoset submersible Pump Set with Starter and totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI Pump Body : CI Make : Kirlosker/Crompton/CRI or equivalent Capacity : 10 HP Three Phase Discharge 23 LPS Head 12 Mtr Suction & Delivery 100x100mm

Supply & Fixing water proof high power LED lights 18x3=54 watts, single color warm white made out of stainless steel 304gr. suitable to be fitted with emitter type power LED's with all in one optical lens of 85% effeciency step pempered glass 8 mm with protection class of IP-68. (Color Design India/Wet design/Oase/Wet design/Oase or equivalent) complete as per the direction & entire satisfaction of Engineer in charge.

Supply & Fixing water proof high power LED lights 6x3=18 watts, single color warm white made out of stainless steel 304gr. suitable to be fitted with emitter type power LED's with all in one optical lens of 85% effeciency step pempered glass 8 mm with protection class of IP-68. (Color Design India/Wet design/Oase/Wet design/Oase or equivalent) complete as per the direction & entire satisfaction of Engineer in charge.

Supply & Fixing adjustable stainless stand (SS-304)/housing for LED lights with all accessories including nuts bolts complete as required for jet nozzle (Color Design India/Wet design/Oase/Wet design/Oase or equivalent) etc complete as per the direction & entire satisfaction of Engineer in charge.

Supply and fixing of Constant Voltage Driver (CVD) 40A suitable for 54Watt and 18Watt LED lights (Color Design India/Wet design/Oase/Wet design/Oase or equivalent) as per the direction and entire satisfaction of Engineer in Charge.

Supplying and fixing 3x 2.5 sqmm round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/Havells or equivalent for filter pumps (a) 3 x 2.5 sq mm size.

Supplying and fixing 4 x 2.5 sqmm submersible Round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/Havells or equivalent for RGB LED Lights complete. (b) 4X2.5 sq mm size.

Supplying and fixing 3x 6.0 sqmm round cables PVC insulated PVC sheathed copper conductor of make Polycab/Finolex/Havells or equivalent for filter pumps (c) 3 x 6.0 sq mm size.

Supplying and fixing PVC Medium Class conduit pipe for concealing of Cables make Kalinga/AKG or equivalent/ISI Mark (d) 25 mm size.

Supplying and Making water Proof joint of underwater cables for submersible cable complete as required.

Supplying and 100mm dia. Debris Collection Stainers in Stainless Steel 304 grade complete as required.

Supplying and Fixing of UPVC pipes (10 Kgf/cm2) of make supreme / Prince or equivalent confirming to IS 4985:2000 including all UPVC fitting tested to a test pressure of 10 Kgf/sqcm i/c jointing with good quality solvent of following sizes. All fixing to be done to the entire satisfaction and sample approved by Engineer-incharge. 110 mm OD Pipe

90 mm OD Pipe

63 mm OD Pipe

50 mm OD Pipe

Supplying and fixing of 100 mm dia CI Butterfly Valve of pressure rating PN1.6 with EPDM rubber lining matching flanges and accessories complete short pattern as required (Kirloskar/leader/Zoloto/Sant or equivalent) as per per the direction and entire satisfaction of Engineer in Charge.

Supply and fixing of 100 mm dia Non return Valve and accessories complete. Make - Sant/Leader/HVI/Zoloto or equivalent

Supplying installation testing and commissioning of Single Phase horizontal monoset submersible Pump Set with Starter and totally enclosed water filled squirrel cage induction motor water lubricated with oil seals with sleeves and thrust bearing having all rotating parts dynamically balanced for silent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI Pump Body : CI Make : Kirlosker/Crompton/CRI or equivalent Capacity : 2 HP Single Phase Discharge 11 LPS Head 8 Mtr Suction & Delivery 65x50mm

Supplying and Fixing of TOTALLY ANTI-CORROSIVE Bobbin wound + Fibre Glass filter. Fitted with pressure gauge panel, manual air bleeder, water drain and emptying plug.fitted with collector arms and diffuser made from unplasticized PVC and polypropelene. Maximum working pressure : 2.5 kg/cm². Diameter : 900mm/36". Velocity 28 Cub mtr/Hr, cap. 31,200 Ltr/hr. Make - Emaux/ACL/Pentolex or equivalent

Supplying and fixing of Granular sand media for sand Filter

Supply and fixing of 50mm dia. Wall return jets for delivery line of sand filter inside waterbody as per direction, instruction and entire satisfaction of Engineer-in-charge. Make - Emaux/ACL/Pentair or equivalent

Supply and fixing of Manifold made out of GI jindal B class in size of 150mm Dia and 1000 mm in Length complete as per the direction & entire satisfaction of Engineer in charge.

Supply and fixing of waterpond disinfection system/chlorine dosing system for delivery line of sand filter as per direction, instruction and entire satisfaction of Engineer-in-charge. Make - Emaux/ACL/Pentair or equivalent

Supply , Installation testing and Commissioning of 24V CE/BIS certified IP67 flexible Linear strip with reflective, white surface and 3M adhesive tape on the back. Having 60° beam angle, side view . CRI 80.Water & UV resistant flexible linear LED luminaire . Having atleast 10W/mtr and 180lm/mtr ,Complete with power supply , connectors ,end caps complete in all respects as per Architectural design requirement .

Supply , Installation testing and Commissioning of 24V IP67 CE /BIS certified flexible Linear strip with reflective, white surface and 3M adhesive tape on the back. CRI 80.Water & UV resistant flexible linear LED luminaire in up to 5 m length in polyurethane encapsulation and with 200 mm IP67 mini connectors on both ends. Having atleast 10W/mtr and 118 lm/W,Complete with power supply, connectors end caps complete in all respects , as per Architectural design requirement .

Supply , installation testing and commissioning of IP66, CE/BIS certified IK06 Floor , wall- and ceiling-mounted recessed luminaire intended for use with LED light sources. Comprising body and installation frame casing .Extruded aluminium body closed at the top by a transparent or anti-slip glass screen secured with silicone; with die-cast aluminium end caps complete with silicone seals; aluminium outer casing with techno-polymer caps. Having wattage and lumens upto 6W and 570 lm, wall grazing .Complete with power supply , complete in all respects as per Architectural design requirement . Length :-528mm .

Supply , Installation testing and Commissioning of IP66 CE/ BIS certified ,IK07 Direct light luminaire intended for use with metal halide, sodium vapour and halogen light sources . Wall, ceiling and fl oor , pole installation using bracket .Bracket in extruded aluminium with screen-printed graduated scale to facilitate aiming operations.Internal gaskets water-sealed with silicone. Having wattage and lumens upto 4-5W and 320 lm .Complete with power supply complete in all respects , as per Architectural design requirement .

Supply, Installation testing and commissioning of IP67 CE/BIS certified adjustable inground luminarie made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content.Hard chromeplated stainless steel 316 grade front ring.IP68 PG-11 cable gland. Having wattage upto 14W .Complete in all respects as per Architectural design requirement.

Supply Installation testing and commissioning of 24V DC CE/BIS certified high encapsulated linear light IP68 protected , 3M self adhesive tape included. Homogeneous and dot free illumination in very low installation depths,UV protected, . Complete with power supply and water proof connectors complete in all respects as per Architectural design requirement .Having wattage upto 6W /mtr ,200lm/mtr

Supply , Installation testing and Commissioning of 24V CE/BIS certified IP67 flexible Linear strip with reflective, white surface and 3M adhesive tape on the back. Having 60° beam angle, side view . CRI 80.Water & UV resistant flexible linear LED luminaire . Having atleast 10W/mtr and 180lm/mtr ,Complete with power supply , connectors ,end caps complete in all respects .As per Architectural design requirement .

Supply, Installation testing and commissioning of High efficiency IP68 CE/BIS certified underwater LED spot light for illumination of water features and fountains revealing underwater architecture.Complete housing made of marine grade stainless steel #316 .Recommended installation depth upto 1 metre below the water surface.Having 6W LED . Complete with all respects . As per Architectural design.requirement.

Supply, Installation testing and Commissioning of 6W CE/BIS certified IP65 safety class 1 having integrated power supply hardly construction luminarie . The luminaire comes with a luminous flux of 401 lm(at 3000K) and beam angle of 15deg/ 25deg/ 40deg.The landscape luminarie should have bracket arrangement and swivel range +70/20 in the horizontal direction Finish to be pure polyster powder coated as per acrhitect color scheme .Complete in all respects as per Architectural design requirement.

Supply , installation testing and commissioning of CE /BIS certiifed IP66 , IK07 pole mounted LED light to highlight the statue from the pole . Optical compartment and front frame in die -cast material , transparent tempered sodium calcium safety glass, secured to frame with silicone . Bracket in extruted aluminium with screen printes graduated sacle to faciliate aiming operations .All external screws to be in stainless steel . The fixture should have snoot accessories with good aiming . Having atleast wattage 16W , 2500lm complete in all respect as per Architectural design requirement.

Supply , installation testing and commissioning of flat lighting poles having height of 6mtr .Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint as per Architectural design requirement.

Supply, Installation testing and commissioning of IP67 CE/BIS certified adjustable inground luminarie made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content.Hard chromeplated stainless steel 316 grade front ring.IP68 PG-11 cable gland. Having wattage upto 14W .Complete in all respects as per Architectural design requirement.

Supply , Installation testing and Commissioning of 24V CE /BIS certified IP67 flexible Linear strip with reflective, white surface and 3M adhesive tape on the back. CRI 80.Water & UV resistant flexible linear LED luminaire in up to 5 m length in polyurethane encapsulation and with IP67 mini connectors on both ends. Having wattage & lumnes upto 10W/mtr and 118 lm/W. Complete with power supply , connectors and other accessories complete in all respects ,as per Architectural design requirement .Length 150mm.

Supply, Installation testing and Commissioning of 12W CE / BIS certified IP65 safety class 1 having integrated power supply hardly construction luminarie . The luminaire comes with a luminous flux of 986 lm(at 3000K) and beam angle of 15deg/ 25deg/ 40deg. The landscape luminarie should have bracket arrangement and swivel range +70/20 in the horizontal direction Finish to be pure polyster powder coated as per acrhitect color scheme . Complete in all respects as per Architectural design requirement.

Supply, Installation testing and commissioning of a decorative LED bollards CE/BIS certified designed to provide soft, uniform light. These luminaries offer shielded glare free illumination of ground surface and are perfect for illuminating entrances, footpaths as well as garden and landscape architecture. Luminaire body made of rectangular extruded aluminium tube with top SS sheet and non corrosive SS fasteners Having wattage upto 12W height 1 mtr complete in all respects as per Architectural design requirement.

Supply Installation testing and commissioning of Outdoor LED luminarie CE/BIS certified IP66 surface /wall mounted consisting of screen and supporting base PMMA screen, die-cast Aluminium supporting base, stainless steel plate for fixing compatable with lighting management system and mounting screws of stainless steel. Complete with power supply and water proof connectors. Complete in all respects as per Architectural design requirement. all and surface-mounted luminaire with 3000K LED,3W having lumnes upto 320lm, 180° blade optic.

Supply , Installation testing and Commissioning of 24V CE/BIS certified IP67 flexible Linear strip with reflective, white surface and 3M adhesive tape on the back. CRI 80.Water & UV resistant flexible linear LED luminaire in up to 5 m length in polyurethane encapsulation and with IP67 mini connectors on both ends. Having wattage & lumnes upto 10W/mtr and 118 lm/W. Complete with power supply , connectors and other accessories complete in all respects ,as per Architectural design requirement .Length 150mm.

Supply, Installation testing and commissioning of High efficiency IP68 CE/BIS certified underwater LED spot light for illumination of water features and fountains revealing underwater architecture.Complete housing made of marine grade stainless steel #316 .Recommended installation depth upto 1 metre below the water surface.Having 6W LED . Complete with all respects . As per Architectural design.requirement.

Supply , Installation testing and Commissioning of 24V CE/BIS certified IP67 flexible Linear strip with reflective, white surface and 3M adhesive tape on the back. Having 60° beam angle, side view . CRI 80.Water & UV resistant flexible linear LED luminaire. Having atleast 10W/mtr and 180lm/mtr ,Complete with power supply , connectors, end caps complete in all respects .As per Architectural design requirement .

Supply, Installation testing and Commissioning of 6W CE/BIS certified IP65 safety class-1 having integrated power supply hardly construction luminarie . The luminaire comes with a luminous flux of 401 lm(at 3000K) and beam angle of 15deg/ 25deg/ 40deg.The landscape luminarie should have bracket arrangement and swivel range +70/20 in the horizontal direction Finish to be pure polyster powder coated as per acrhitect color scheme .Complete in all respects as per Architectural design requirement.

Supply, Installation testing and commissioning of IP67 CE/BIS certified adjustable inground luminarie made up of die-casting grey powder coated aluminium, corrosion resistance with low copper content.Hard chromeplated stainless steel 316 grade front ring.IP68 PG-11 cable gland. Having wattage upto 14W .Complete in all respects as per Architectural design requirement.

Bidder Name

Amount

JCC INFRAPROJECTS PVT. LTD.(GSTN-08AADCJ2597D1ZI)

M/S GULSHAN RAI JAIN-II(GSTN-08AAJFG9017C1ZI)

LNA Infraprojects Pvt. Limited(GSTN-08AADCL1585B1ZQ)

M/S Niraniya Construction Co(GSTN-NA)

M/S Niraniya Construction Co

M/S GULSHAN RAI JAIN-II

LNA Infraprojects Pvt. Limited

M/S Niraniya Construction Co

LNA Infraprojects Pvt. Limited

JCC INFRAPROJECTS PVT. LTD.