Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.9 LAccepted-AOC 16 176 A BHARATHI PURAM NAGAI NAGAR DINDUGUL 3 | DINDUGUL | DINDIGUL | TAMIL NADU | L1 | Accepted-AOC SATISFIED THE CONDITION OF CA | |
| 2 | L2₹18.7 L+₹78,260.25 (4.38%)Rejected-Finance | L2 | Rejected-Finance Rejected being not the lowest | |
| 3 | L3₹19.0 L+₹1.1 L (5.99%)Rejected-Finance | L3 | Rejected-Finance Rejected being not the lowest | |
| 4 | L4₹19.5 L+₹1.6 L (9.05%)Rejected-Finance CHENNAI | L4 | Rejected-Finance Rejected being not the lowest | |
| 5 | L5₹19.7 L+₹1.8 L (9.87%)Rejected-Finance | L5 | Rejected-Finance Rejected being not the lowest |
Tender Value
₹18.7 L
EMD Value
₹37,400
Closing Date
14 Aug 2020, 6:00 pmClosed
Garrison Engineer (I)(CG) Chennai
Garrison Engineer (I)(CG) Military Engineer services Second Floor CG DHQ No 5(TN) No 4 and 4 A Clive Battery complex Rajaji Salai Chennai 600001
Provision of 07 in numbers car parking shed for EPs quarters at CGRA Tuticorin and Preparation of key location plan for all CG units lands held by ICGS Tuticorin and shifting and erecting of steel safe and flag mast in OTM Bldg at Tuticorin ETC
2020_MES_359811_1
8775/GE(I)CG
Open Tender
Civil Works
Item Rate
240 days
Garrison Engineer (I)(CG) Chennai
All as per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (I)(CG) Chennai
₹37,400
Yes
30 Dec 2020
22 Jul 2020
18 Aug 2020
22 Jul 2020
14 Aug 2020
28 Jul 2020
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation n.exc 10 sqm on plan and getting out in soft/Loose soil complete all as specified and as directed.
Material and labour for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate ) as in mass concrete for foundation including necessary form work complete all as specified and as directed.
Material and labour for Brick work with fiy ash bricks, straight or curved on plan exc 6 m mean radius ,built in cement mortar 1:6 complete all as specified and as directed.
Material and labour for Hardcore of gauge exceeding 63 mm but not exceeding 100 mm deposited ,spread and levelled in layers not exceeding 15 cm thick ,watered and rammed to a true surface complete all as specified and as directed.
Material and labour for Polythene film ,Black, 50 Micron laid in floors complete all as specified and as directed.
Material and labour for 100mm thick, PCC (1:2:4) type B-2 (using 40mm stone graded aggregate) as in floors etc, finished even and smooth without using extra cement incuding necessary form work complete all as specified and as directed.
Material and labour for Providing Pre cast cement concrete Jallies Type B0 1:2:4 (using 12.5 mm graded stone aggregate) , 50 mm thick ( measured solid )including all mouldings set in cement mortar 1:4 complete all as specified and as directed.
Supply and fix Rolled Mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS -1161,1998 grade ST-240 complete all as specified and as directed.
Supply and fix Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0,5 mm thick of an colour having tensile strength of 550 Mpa as in Roof covering /cladding to walls fixed with self tapping screws complete all as specified and as directed. Make: Tarta Blue Scope/ LLoyd/Jindal
Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Material and labour for Rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for Rendering 15mm thick in CM 1:4 on external surface of brick work in two layers with Ist coat of 10 mm thick and finishing coat of 5 mm thick mixed with water proofing compound @ 3 % by weight of cement complete all as specified and as directed.Note : Supply of water proofing compound shall be measured and paid under relevent items seperately,
Material and labour for Preparation of newly plastered post/wall surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for Preparation of newly plastered wall /column surfaces and applying two coats of Exterior Emulsion Paint (weather coat) over one coat of water based primer complete all as specified and as directed. Note:(i) Make of exterior emulsion paint : ASIAN (BRAND :APEX ) (ii) Make of primer : ASIAN
Returning,filling in trenches including spreading,levelling ,watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed.
Removing excavated soil n exc 50 m and depositing where directed at a level n exc.1.5 m above the starting point complete all as specified and as directed.
Material and labour for Providing Precast cement concrete 1:2:4 Type B-1 using 20 mm graded aggregate as in landings , cover slabs ,chajja and similar articles set in cm 1:4 complete all as specified and as directed.
Material and labour for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required,including cranking,bending,spirally for hooping for columns ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
Ditto -All as per item no :18 here in before but 6 mm to 10 mm dia TMT bars for Stirrups,spacers and binders
Supply on;y Water Proofing Compound . Make of water proofing compound : Impermo/Roff
Material and labour for CONTOUR SURVEY duly marking structures and services with Total Station with standard Grid size as per IS ,Preparing AUTO CADD Drawings both in soft/hard copies ,Making CDs of the survey project in the scales of 1:100 ,1:200 and 1: 1000 including conveyance and shifting of technical equipments and engineers for an area of 28 Acres of land at CGRA Tuticorin complete all as specified and as directed. Note;Three sets of survey report mentioned above shall be submitted to Engineer-in-charge
Ditto -All as per item no :21 here in before but for an area of 05 Acres of Land at coast Guard station Tuticorin
Ditto -All as per item no :21 here in before but for an area of 1.5 Acres of Land at coast Guard station Tuticorin
Demolition of existing brick work/concrete works carefully to remove the 05 numbers of steel lockers (Safe) ,Lifting manually from Iind floor to Ground floor in old OTM Building and shifting it by mechanical transport to new OTM Building and refixing in new location by providing with suitable Brick work/concrete work including removal of debris out side the MD land as directed by Engineer in charge complete all as specified and as directed.
Taking down the existing stainless steel flag mast from Roof top of new OTM Building ,Removing the existing broken MS Pully by Gas cut welding and fixing with new MS Pully/MS Hook to enable flag hoisting and refixing the Flag mast in its original position complete all as specified and as directed.
Material and labour for Random Rubble Masonry walling Uncoursed built in cement mortar 1:4 complete all as specified and as directed.
Filling under pavements or floors with approved Moorum obtained from outside the MD Land , spreading ,levelling , watering and well ramming in layers not exceeding 15 cm thick complete all as specified and as directed.
Material and labour for Rendering 15mm thick in CM 1:4 on stone masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for Preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.
Supply and fix 1000 Litres capacity Rotational moulded polyethelene water storage tanks ,Double layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.Make : Sintex/ Polycon/ Infra
Supply and fix 3- layer PP-r Polypropylene eandom co polymer 32 mm outer diameter of pipes , SDR 7.4 and PN-14,UV Stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to wall ,ceiling or to floors etc complete all as specified and as directed. Make:SFMC/Vectus
Material and labour for 25 mm dia bore Gun metal gate valve with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed .Make:Leader/Zoloto/Kirloskar
Supply and fix 25 mm bore dia Ball valves ,high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minimum weight: 455 gms) complete all as specified and directed .Make :Prayag
NVRAGAVANANDSONS
MURUKAN BUILDERS
VVM CONSTRUCTIONS
CHANDRASEKRAN ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .