Repair and Renovation of Health and wellness room at JFMC building by Head Quarters Building Maintenance and Management Range.

Dismantling of Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Dismantling wall for constructing new Ventillator above 7 feet from floor for 12 rooms

Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 9” x4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers

Earth work excavation in all soils and sub-soils and to full depth as may be directed execept in rock requiring blasting includsive of shoring shuttering, bailing out water wherever necessary and depositing the edxcavated earth with a lead of 10 mts within the compound in places shown by the departmental officers and clearing and levelling the site, etc.,

Supply and filling M-sand below flooring area

Cement concret 1:3:6 using 20mm gauge hard broken granite stone jelly for ventilator including dewatering wherever necessary and laid in layers of not more than thick, well rammed, consolidated and curing etc., complete complying with standard specification.

Cement Mortar 1:5 Levelling / Bedding Layer for Tiles.Adjust the slope accurately again towards the drain.Allow it to set partially. (Ref. Sub data)

Plastering with cm 1:3, 20mm thick

Flooring with plain ceramic Tiles of approved quality and colour size 305x305x6mm thick laid in cement mortar 1:3 20mm thick and painting with white cement including furnishing the joint and painting flush with the surface complete

Dadooing the walls with of approved quality and colour plain ceramic tiles size 300mmx450mmx8mm thick laid in cement mortar 1:2, 10mm thick and pointing with white cement using 0.4Kg/M2 includingfinishing the point and pointing flush in the file surface complete

paintings of wall above 7 seven feet

Ceiling Painting

Supplying and Fixing of Fully Panelled Doors - External or Internal Moulded Planks Single Leaf 900 X 2100 Type ‘C’ - ( Single Panels) Etc, Complete Complying With Standard Specification and as Directed by the Departmental officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) casement type windows (open) with an outer frame size of 60 mm × 58 mm and shutter profile reinforced with GI/1 mm 125 GSM, completely corrosion-free. The profiles are multi-chambered sections with a wall thickness of 2 mm. EPDM black rubber is provided all around the edges of the frame and shutter for sealing. The shutter will be fitted with Espag multi-point locks operated by a handle, with welded and cleaned corners and joints. Radiation-free plain or brown-colored 4 mm thick pin-headed glass is provided in the shutter, ensuring no water leakage even during heavy storms. The shutters will have key-lockable action, security-protective hinges, and strong locking systems to minimize noise and energy loss. The connecting mechanism between sash and outer frame will enable proper opening of the window. The window shall be fixed to the wall with 100% packing using screws and silicon sealant all around the frames,

Providing factory-made pre-laminated FPVC (Foamed/ Formed Polyvinyl Chloride) door frame of size 105 × 40 mm with a wall thickness of 10 mm, manufactured from extruded rigid FPVC profile and mitre-jointed with 6 numbers of 5 mm long screws. The door frame shall be fixed to the wall using 80 mm long screws with PVC fasteners, 3 numbers for each vertical member. GI stiffeners in the form of ‘U’ channels of size 29 × 9 mm, 1 mm thick and 150 mm long shall be provided, 3 numbers at hinge points. Frame reinforcement shall consist of a ‘U’ GI channel of size 46 × 22 × 0.6 mm, along with a bottom tie rod of ‘U’ GI channel size 15 × 15 × 1 mm, complete as per standard specifications

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated unsheated SC.Cu, Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T switch in flush with wall with 3mm thick hylum sheet cover for makin good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator)per room 4 points.

For laying of CPVC Pipe of Dia 32 mm

For supply and laying of Waste line of dia 110mm

Supplying of Fine polished Jet black Granite Slab 1200mm x 600mm, 16mm to 18mm Thick (PWD SSR M-0242)

4’ 18W LED Light

Providing and fixing European type water closet with P or S trap, complete with double-flapped seat and seat cover fitted with brass hinges, and a 12.5 litre capacity porcelain low-level flushing tank including all necessary internal fittings

Wash Hand Basin (With Pedestal) of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc

CP Two Way Bib Cock with Health Faucet

Pillar Cock (for Wash Basin) – CP Brass

CP Angle Cock Tap

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification.

Supplying and fixing of SS Towel Rack 600mm long with Lower Hanger

Supply and fixing of Exhaust Fan

Supplying and fixing position CI Nahani Trap / floor Trap of the100mm dia with best stainless steel gratings of approved brand and quality giving connection to the CI/pvc pipes etc., complete complying with standard specification.