Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.6 LAccepted-AOC | 1 | Accepted-AOC work order issued | |
| 2 | Rejected-Technical ERAL | - | Rejected-Technical Rejected |
Tender Value
₹8.1 L
EMD Value
₹8,100
Closing Date
21 Sept 2023, 3:00 pmClosed
Executive Officer
Sawyerpuram Town Panchayat
Supply and Delivery and installation Reverse Osmosis plant in a 2000 Litre capacity Sebathaiyapuram main road ( Amman kovil near ) in Sawyerpuram Town Panchayat.
2023_DTP_370592_1
127-1/2023/A1
Open Tender
Water Supply/Equipments/Meter/Drilling/Boring
Works
90 days
Sawyerpuram Town Panchayat
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹8,100
Yes
20 Sept 2024
16 Sept 2023
22 Sept 2023
16 Sept 2023
21 Sept 2023
16 Sept 2023
Amount
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Finishing the top of roof with one course of machine pressed tiles of size 20cm x 20cm x 2 cm approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound confirming to ISS by 2% weight of Cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide etc., complete complying with standard specifications.
Supplying fabricating and fixing in position of Aluminium anodised natural colour matt finish door half glazed and half PLB board / fully 12mm thick PLB board / fully 5.5mm thick glazed door using rectangular Alu. Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, aluminium clips, best double action floor springs / door closer, handles, locks and glass including all materials, labour and power consumption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC columns, beams, or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc. complete. The aluminium surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than 15 microns for all sections. All the materials should be got approved by the Engineer-in-charge brfore fixing in position as directed.
Painting two coats with approved Emulsion paint over a priming coat of cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete.including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:65-A
Geological investigation charges preparation of geological survey report etc., complete
Drilling 115mm deep vertical bore well in all clause of soils /hard rock area including all transportation charges of rigid and labour charges etc complete
Supply and fixing in position of 140mm PVC casing Pipe 6 KSC ISI make including cost and conveyance charges to site and etc., complete
Supply and Delivery of 50mm GI pipes including cost and conveyance of all materials and all labour charges etc complete as per ISI specification.
Supply and delivery of 1HP Submersiable Pumpset as per ISI 9079/1989 1HPWITHOUT PANEL BOARD including all charges etc complete as per standard specification.
Supply and delivery of Panel Board 1HP with two level guard and auto start including all charges etc complete as per standard specification.
Labour charges for the erection of submersible pumpset 1HP in borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply and fixing of 3.50core PVC insulated 150Sq.mm U.G cable including all cost and conveyance etc complete;
Wiring with 2x1.5sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100v grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch and making good of the concealed portion with suitable colour for PVC concealed light point. SD 24 ISI make with standard specification.
Wiring with 2x1.5sqmm (22 / 0.3) PVC insulated SC unscheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 36 ISI make with standard specification
Supply and run of 4 of 4sqmm (56 / 0.3) insulated SC unsheathed Cu.Cconductor of 1100V grade on 7/20 GI bearer wire for service connection mains. SD 62 ISI make with standard specification.
Supply and run of 4 x 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm dia GI Pipe ( Class ‘B’) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 67 ISI make with standard specification.
Supply and fixing of 32 Amps DPIC switch of 500 V with metal clad with fuse and netural TW Board with earth connection only. SD 136 ISI make with standard specification.
Supply and fixing of single box type 4’40 w fluorescent fitting complete with copper choke and condenser with TW Round on wall and with tube with PVC unsheathed leads from tennauble to the nitting ISI make with standard specification.
Supply, delivery and fixing of Reverse Osmosis (RO) plant with Coin operated water vending machines out put of 1000 litres per hour treated water of 1000 litres stainless steel product water storage tank and 2000 litres capacity of HDPE Raw water storage tank with follwing Special Technical conditions, Performance Gaurantee and Post warranty comprehensive annual Maintenance contract ( Special Technical conditions, Performance Gaurantee and Post warranty comprehensive annual Maintenance contrac Separately enclosed ) including cost and conveyance of all equipments and labour charges for errection and commissioning etc complete with following technical specifications.
Provision For EB charges
Athivel
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_441954.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .