Construction of Inspection Bungalow Building RCC Ground Floor and First Floor at PWD IB Campus at Sootea under Untied Fund for 2019-20

Amount

GROUND FLOOR Earth work in excavation for foundation trenches of walls,retaining walls, footings of column,steps & septic tank including refilling (return filling) the quantity as necessary after completion of works , breaking clods in return filling , dressing, watering ramming etc.& removal of surplus earth as directed & specified including bailing out water where necessary as directed & specified. A.Upto a depth of 2.00 m below the existing ground level. a) Ordinary soil

Providing brick soling in foundation and under floor at all levels with best quality picked jhama bricks, sand packed and laid to levels and in panels after preparing the subgrade as directed including all labour and materials if necessary dewatering complete. a) Brick on flat soling

Plain cement concrete works with coarse aggregate of sizes 13mm to 32 mm in foundation bed for footing steps,walls,brickworks etc.as directed and specified including dewatering if necessary & curing complete (shuttering where necessary shall be measured & paid separately). a) In prop 1:3:6

Providing and laying plain/reinforced cement concrete works cement with coarse sand and 20 mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcment. 1) Using Mixure machine a) In sub structure upto plinth level (b) M15or Prop 1:1.5:3

Providing and laying plain/reinforced cement concrete works cement with coarse sand and 20 mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcment. B) In super structure from plinth level up to 1st Floor level (a) M 20 or Prop 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including centering , shuttering, strutting and propping etc.height of proping and centering below supporting floor to ceiling not exceeeding 4.0 M and removal of the same for in situ reinforced concrete and plain concrete work in. ii) Using 25mm thick plank Column up to Plinth Level

Plinth Beam

Column up to First Floor Level

Floor Beam

Floor Slab

RCC Lintel

Stair Flight I& II

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S Code for RCC work including straightening,cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20 G annealed black wire & placing in position with proper blocks, supports,chairs, etc. complete up to 1st floor level. ii) Super ductile(SD) TMTreinforcement bar

Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary and curing complete as directed in sub-structure up to plinth level. c) In proportion 1:4

Earth / sand filling in plinth in layers not more than 150mm thick inclu-ding necessary carriage , watering ,ramming etc.complete as directed and specified including payment of land compensation, Forest roylty ,sales tax and other duties. C) With silt (predominantly non plastic) by Truck carriage i/c loading unloading

Providing and laying 25 mm thick damp proof course with C.C 1:1.5 :3 with graded stone 10mm down nominal size including providing approved damp proof admixure in proportion as recommended by the manufacturer including curing complete as directed.

112mm thick 1st class brick nogged wall in cement mortar in cluding racking out joints and curing complete as directed in super-structure above plinth up to 1st floor level.(protruding rod of column will be measured and paid separately).(b) In prop 1:4

Providing wood work in frame ( chow kaths) of doors ,windows clerestorey windows and other similar works wrought,framed and fixed in position including supplying and fixing MS holdfast embeded in CC 1:2:4 and two coats of kiricide oiling to the timber faces in contact with masonary as directed and specified. A) With Sal wood

15mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b) In cement mortar 1:3

15mm thick Cement plaster in single coat on fair side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers not exceeding 80mm in girth finished even and smooth including curing complete as directed. (b) In cement mortar 1:3

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concete in prop 1:3:6 ( 1 cement :3 coarse sand :6 coarse aggregate of 25mm down ) and 15mm thick wearing layer in cement concrete 1:1:2 (1 cement : 1 coarse sand :2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish( using cement slurry for bond @ 2.75 Kg per square metre of floor area) including curing complete as directed.

Providing fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mmx75mmx3.55mm) with necessary screws (other fittings to be measured and paid separately). A) With Teak wood i.40 mm thick

Providing fitting and fixing fully glazed window with sash bars including oxidised MS butt hinges (75mmx60mmx3.15mm) 2 nos on each leaf and 3 nos on single leaf ( glass pane to be measured and paid separately). A) With Teak wood i.40 mm thick

Providing fully glazed clerestorey window and fan light including fitting and fixing 2 MS pivot hinges (75mmx20mmx3mm) eye hook and nylon chord complete.( glass pane shall be measured and paid separately). A) With Teak wood i.40 mm thick

Providing two coats of birlaWhite Wall care Putty ( water resistent white cement based putty for concrete/mortar walls an ceiling both internal and external) after removing all loosely adhering materials from the wall surface with he help pf emery stone,puttyblade or wire brush and moistening the wall with suficient quantity of clean water as specified and directed.9 (Total thickness of two coats is maximum 1.50mm) (i) Thickness=1.50mm thickness.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture( Asian/Berger paint /ICI paint/J & N paint/ Nerolac) to give an even shade inluding cleaning the surface of all dirt,dust and other foreign matter sand papering and stopping. (i) Surface over 100mm in width/girth. i)Surfaces over 100mm in width

Wall painting ( two coats) with plastic emulsion paint of approved brand and manufacture ( Asian paint/Berger paint/ ICI paint/ J &N paint/ Nerolac) on new surface to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with two coats of acrylic emulsion exterior paint of approved brand of required shade,thinning by adding water as per the specification of manufacture after thoroughly brooming the surface to remove all dirt and remains of loose powdered materials as specified and directed .

Providing fitting and fixing MS grill of required pattern for windows/ clerestorey window/ opening with MS flats at required spacing in frame allround, MS bars with round headed bolts & nuts or screws. I) Plain grill (a) Fixed to wooden frames.

II) Ornamental grill fixed to steel frame

FIRST FLOOR Providing and laying plain/reinforced cement concrete works cement with coarse sand and 20 mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcment. B) In super structure from plinth level up to 1st Floor level (a) M 15 or Prop 1:2:4

Extra over item no 2.2.1(I)

Providing form work of ordinary timber planking so as to give a rough finish including centering , shuttering, strutting and propping etc.height of proping and centering below supporting floor to ceiling not exceeeding 4.0 M and removal of the same for in situ reinforced concrete and plain concrete work in. ii) Using 25mm thick plank Column

Floor Beam

Floor Slab

Stair Flight

Extra for first Floor

Supplying fitting and fixing in position reinforcement bars conforming to relevant I.S Code for RCC work including straightening,cleaning cutting and bending to proper shapes and length as per details supplying and binding with 20 G annealed black wire & placing in position with proper blocks,supports,chairs, etc. complete up to 1st floor level. b)ISI approved super ductile TMT bar

Extra For First Floor

112mm thick 1st class brick nogged wall in cement mortar in cluding racking out joints and curing complete as directed in super-structure above plinth up to 1st floor level.(protruding rod of column will be measured and paid separately).(b) In prop 1:5

Extra for first Floor

Providing wood work in frame( chowkaths) of doors ,windows clerestorey windows and other similar works wrought,framed and fixed in position including supplying and fixing MS holdfast embeded in CC 1:2:4 and two coats of kiricide oiling to the timber faces in contact with masonary as directed and specified. A) With Sal wood

15mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (b) In cement mortar 1:4

15mm thick Cement plaster in single coat on fair side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers not exceeding 80mm in girth finished even and smooth including curing complete as directed. (b) In cement mortar 1:4

25mm thick Cement concrete topping 1:2:4 ( 1 cement:2 coarse sand:4 coarse aggregate of 12mmn nomina size) finished with a floating coat of neat cement finish ( base concrete to be measured and paid separately) to be laid in panels including curing complete as directed.

Providing fitting and fixing full panelled doors/ windows including oxidised M.S butt hinges (100mmx75mmx3.55mm) with necessary screws (other fittings to be measured and paid separately). A) With Teak wood i.40 mm thick

Providing fitting and fixing fully glazed window with sash bars including oxidised MS butt hinges (75mmx60mmx3.15mm) 2 nos on each leaf and 3 nos on single leaf ( glass pane to be measured and paid separately). A) With Teak wood i.40 mm thick

Providing fully glazed clerestorey window and fan light including fitting and fixing 2 MS pivot hinges (75mmx20mmx3mm) eye hook and nylon chord complete.( glass pane shall be measured and paid separately). A) With Teak wood i.40 mm thick

Providing two coats of birlaWhite Wall care Putty ( water resistent white cement based putty for concrete/mortar walls an ceiling both internal and external) after removing all loosely adhering materials from the wall surface with he help pf emery stone,puttyblade or wire brush and moistening the wall with suficient quantity of clean water as specified and directed.9 (Total thickness of two coats is maximum 1.50mm) (i) Thickness=1.50mm thickness.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture( Asian/Berger paint /ICI paint/J & N paint/ Nerolac) to give an even shade inluding cleaning the surface of all dirt,dust and other foreign matter sand papering and stopping. (i) Surface over 100mm in width/girth. i)Surfaces over 100mm in width

Wall painting ( two coats) with plastic emulsion paint of approved brand and manufacture ( Asian paint/Berger paint/ ICI paint/ J &N paint/ Nerolac) on new surface to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Finishing wall with two coats of acrylic emulsion exterior paint of approved brand of required shade,thinning by adding water as per the specification of manufacture after thoroughly brooming the surface to remove all dirt and remains of loose powdered materials as specified and directed .

Providing fitting and fixing MS grill of required pattern for windows/ clerestorey window/ opening with MS flats at required spacing in frame allround, MS bars with round headed bolts & nuts or screws.I) Plain grill ( a) Fixed to wooden frames.

Supplying including and fixing of following metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO, CRABTREE (MURANO) in surface/recessed system complete as per direction of department. 3 module type metal

4 module type metal

6 module type metal

8 module type metal

Supplying including and fixing of following metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO, CRABTREE (MURANO)front plate of suitable colour as per direction of department. 3 module type metal

4 module type metal

6 module type metal

8 module type metal

Supplying with fitting fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOE (AVE), MK (BLENZE), SCHNEIDER (ZENSELO, CRABTREE (MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp two way modular clip in switch MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO,CRABTREE (MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/16 amps 3/5 pin combined shuttered complete MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA),MK (WRAPAROUND/PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Wiring for circuit wiring with P.V.C insulated single coreunsheated industrial (Multistrand) cable FR conforming to IS-694 : 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finolex/RR kabel/Nicco/Anchor or Equivalent make as approved by the Deptt) in surface/recessed PVC conduit (Berlia/AKG/Precision/Presto Plast/Polycab/MW or Equivalent make as approved by the Deptt) wiring system. With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . With 3 x 10 sq. mm. + earth continuity with2x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying with fitting and fixing SPN 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B Series (Schneider MG, legrand, Hager make) 6 to 32A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 63A

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt.

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent make

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Domestic Ventilator RX 150 mm sweep (ORIENT make), Brisk Air 150 mm sweep Louver type (Crompton make)

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp.

Supply with fitting fixing of surface and wall mounted LED luminaries complete with all accessories icluding 1.5 sq.mm PVC insulate S.C copper Conductor as required as directed by the Department. Phillips model LED Batten BN550 WLED 63000/65000 or equivalent as approved by the deptt.

Supplying with fitting and fixing 100 watt electronic modular fan speed controller including making necessary connection as directed by the Department.

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 35.00 Sq.mm 4 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Supplying with fitting and fixing MCCB income and MCB outgoing sheet steel, phosphatised, powder painted single door surface mounting vertical TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar up to 125A and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. Richa, Bentec, Adhunic, V-Guard make) 4 way TPN (8+12) double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way TPN (4+12) double door

Supplying with installation testing and commisioning of 70w LED Street light model no.LHEWEBP7PN6GO70 etc. complete including all acessories as per specified and directed by the department.

Supplying with installation testing and comissioning of LED LUMENO 10W E27 WW Lamps etc. complete including all acessiories as per specified and directed by the department

Payment of load security, meter security etc. to ASEB, Rate as per ASEB app. Rate. A.C

Supplying with installation testing and commissioning of Hi -- wall 3 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection up to 5 m between the room unit and out door unit as approved by the Deptt.) and as directed by the department. 1 Ton Capacity Voltas make) Model PLATINUM 3S

Sanitary works Piping: Supplying fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining,fitting and fixing with clamps,bend ,single tee and all other necessary connectvities etc.as necessary complete at all levels including below GL as directed and specified a) In exposed surfaces or in trenches (I)110mm dia

i) 75mm dia

b) Concealled By chiselling or braking brick wall/ CC RCC and making good to the damages (I)110mm dia

i) 75mm dia

Supplying fitting and fixing 87.5 degree PVC bend of ( Supreme/Prince) or other ISI approved including joining,fitting and fixing etc.as necessary complete at all levels including below GL as directed and specified a) In exposed surfaces or in trenches (I)110mm dia

i) 75mm dia

b) Concealled By chiselling or braking brick wall/ CC RCC and making good to the damages (I)110mm dia

i) 75mm dia

Supplying fitting and fixing 45 degree PVC bend of ( Supreme/Prince) or other ISI approved including joining,fitting and fixing etc.as necessary complete at all levels including below GL as directed and specified a) In exposed surfaces or in trenches (I)110mm dia

i) 75mm dia

Supplying fitting and fixing PVC plain single tee ( Supreme/Prince) or other ISI approved including joining,fitting and fixing etc.as necessary complete at all levels including below GL as directed and specified a) In exposed surfaces or in trenches (I)110mm dia

i) 75mm dia

b) Concealled By chiselling or braking brick wall/ CC RCC and making good to the damages (I)110mm dia

i) 75mm dia

Supplying fitting and fixing PVC plain tee with door of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below GL as directed and specified a) In exposed surfaces or in trenches (I)110mm dia

i) 75mm dia

Supplying fitting and fixing PVC coupler of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below GL as directed and specified a) In exposed surfaces or in trenches (I)110mm dia

i) 75mm dia

Supplying fitting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining,fitting and fixing etc.as necessary complete at all levels including below GL as directed and specified a) In exposed surfaces or in trenches (i)110mm x75mm dia

b) Concealled By chiselling or braking brick wall/ CC RCC and making good to the damages (i)110mm x75mm dia

Supplying fitting and fixing PVC reducer tee of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below GL as directed and specified a) In exposed surfaces or in trenches (i)110mmx75mm dia

Supplying fitting and fixing PVC socket plug of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels (i) 110mm

Providing fitting and fixing PVC cowel of ISI mark complete as directed and specified (i) 110mm

Providing fitting and fixing C.I Grating to the floors complete as directed and specified (i) 110mm

Providing fitting and fixing (300x230)mm C.I yard gully hinged Grating complete as directed and specified

Providing and fixing Ajoy Flowguard chlorinated polyvinyl chloride (CPVC) pipes , having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing with one step CPVP solvent cement and testing of joints complete at all levels as directed and specified (A) In internal wall- Exposed on wall (c) 25mm nominal outer dia of pipe

(d) 32mm nominal outer dia of pipe

(d) 40mm nominal outer dia of pipe

(B) Concealed pipe with cutting chases and making good to the walls (c) 25mm nominal outer dia of pipe

Sanitary works : Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified (G.I & CP pipes will be measured separately. Jaquare make (a) Continental/Clarion (i) Standard

Supplying fitting and fixing stop- cock approved brand and size as mentioned below as directed and specified (G.I & CP pipes will be measured and paid separately. Brass stop cock ( heavy) of Sant make (i) 25mm dia

Supplying fitting and fixing pillar cock of 15mm dia approved brands as directed and specified Agmeco (classic) (a) Flat

Providing fitting and fixing white vitreous china pedestal type water closet ( European type WC pan 400mm high) with seat and lead, CP brass hinges and rubber buffers,CI/MS brackets,40mm dia flush band with fittings including painting of fittings and brackets, required.(Flushing cistern to be paid separately (A) Parryware make (a) White Universal closet S trap ( Cat no C0271) (Anglo Indian) ( inclusive of seat cover)

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush type pipe and CP brass spreader and brass unions etc complete including painting of fittings and brackets,cutting and making good to the walls & floor whenever required. (A) Parryware make (a) White

Supplying fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc.complete as directed and specified ( pipes will be measured separately A) Parryware make (a) White (i) Economy single flush Cat no C8090/C8055)

Providing vitreous china wash basin with CI/MS brackets, CP brass chain with plug PVC waste pipe including painting of fittings and brackets,cutting and making good to the walls & floor whenever required.( pillar cock,stop cock,waaste coupling are to be paid separately) (A) Parryware make (a) White i)Star basin 550x400 ( Cat noC0450)

Providing fitting and fixing mirror with plastic frame of size 500x400mm complete as directed and specified

Providing fitting and fixing chrome plated (CP) soap dish/tray complete as directed and specified i) Jaguar make a) Continental ( Cat no ACN-1331N)

Providing fitting & fixing chrome plated (CP) towel rail complete as directed and specified. b) Sona made iv) Towel rail Diplomat 750mm long (Cat noTR-0605)

Providing fitting & fixing chrome plated waste coupling complete as directed and specified. b) Sona make i) Rupa 32mm (HT/FT) Cat noWS-0801

Supplying fitting and fixing gun metal country pit valve (full way valve) ISI make as directed and specified. c) 25mm

Septic Tank : Supplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75mm 1:3:6PCC baffale wall, inlet and outlet etc are provided at suitable points complete as directed. (vii) 50 user septic tank

Water Tank Supplying and placing plastic cylindrical vertical closed top (PCVC) tank of Sintex/ Polycon/Pitton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (i) 2000 litcapacity (a) Polycon made

Soak pit and inspection Chamber.Construction of filter bed in soak pit including earth work in excavation of soil and then filling up to the trench with brick bats/charcoal covered with earth over a layer of A.C plan sheet above brick bat filling complete as directed

MANHOLE COVER Providing fitting and fixing 450mm dia 90mm thick C.I. Manhole cover and frame of 25 kg weight complete as directed and specified.

WATER SUPPLY : Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost).

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. iii) Bore hole of 125mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. G.I. pipe a) TATA / SAIL (Medium) socket should be welded to the pipes. iv) 100mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium)socket should be welded to the pipes. iii) 40mm diameter Supplying fitting and fixing ISI approved PVC filter 3.00 metre long.

iv) 100mm diameter

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained

Supplying including installation of submersible type water supply motor pumpset with all accessories including panel board on CC foundatio of proportion 1:2:4 jammed with MS nuts and bolts wire rope submersible cable without suction GI Pipe including making necessary connection etc.as complete 2. 1 HP Three Phase

SITE DEVELOPMENT EARTH FILLING : Rai etc. complete including paying necessary forest royalty sing low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. c monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made total quantity) etc. complete as directed and specified.omplete including paying necessary forest royalty, sales tax, land compensation, municipal gate fees, if any (b) Other than Guwahati City.

DRAINS TYPE I (BIGGER) : Providing drain with brick in cement mortar in prop. 1:5 with half brick thick side walls and 100mm thick CC (1:3:6) base over flat soling including 15mm thick cement plastering in prop 1:3 finished with a floating coat of cement slurry as directed with necessary shuttering for sides and earth work in ezcavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii) 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

WHITE ANT TREATMENT> SUPER FLOOR & PARAPET & TILES IN FLOOR : Pre construction anti - termite treatment at the bottom of foundation pits and walls on either side up to a height of 300mm from bottom of the excavation made for column plinth beam, wall, trenches etc. by applying the emulsion @ 5 (five) litres per square meter of the surface area before starting construction work (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment in the back fill in immediate contact with the foundation structure after completion, column, wall etc. to a depth of 450mm and width 300mm (when required refill in 200mm thick layers) applying the emulsion @ 5 (five) litres per square meter towards the concrete and masonry walls so as to ensure earth in contact with the structure well treated - with chemical (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Pre construction anti - termite treatment by applying in the junction of walls, column with the floor before laying floor and after operation of item no. 26.1.3 above making a channel 30mmx30mm all over the walls and making rod holes @ 150mm apart up to ground level below and applying emulsion @ 11 litres per square meter of vertical plinth wall surface inside the building so as to soak the soil with the emulsion up to the ground level and refill the holes and channel with the original materials obtained in making channels (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete.

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above

Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). i) Of size 300mmx450mm and above

Furniture ; Supply & Placement of I.S.I approved Hangout Double Bed (1600(W)x 2400(L)).Understucture:- The legs are made of Square tube of size 25x25mm made out of MS with a thickness of 1.2mm.The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three no.s of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25x25mm made out of MS with a thickness of 1.2mm. The middle Horizontal stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete stucture. The leg is also made of Square tube of size 25x25mm made out of MS with a thickness of 1.2mm. All metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT. Side panel:- The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board:- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The headboard size to be considered as 1000x650mm. Tail Board:- The tail board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The tail board size to be considered as 1000x450mm. Bed Base:-The Bed Base is made up of 12mm thick Prelam Particle Board with both side White laminate. The Bed has a mattress having Bonel Spring panel, spring teel 2.4mm steel wire,100mm height, Cotton felt on top and bottom of the panel - 10mm, 1000GSM, side foam- 40mm, 40 density. Top and Bottom- 10mm, 28 density PU foam sheet, Single quilt top, bottom and side. Fabric-130 GSM. The product must be from a Manufacturer having ISO 9001, ISO 14001,ROHS, Indian Design Mark, Latest BIFMA and IGBC certificates for few of its products.

Supply & Placement of I.S.I of Mattress for Double Bed of 125mm thick. Both side quilted rubberized coir with flexi puff material. The product must be from a manufacturer having ISO 9001, ISO 14001,ROHS, Indian Design Mark, Latest BIFMA and IGBC certificates for few of its products.

Supply & Placement of I.S.I approved Hangout Wardrobe with Mirror. The wardrobe side panels and doors are made up of 18mm thick Prelam Particle with both sides decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides.(18mm Prelam Particle Board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The topmost part of the wardrobe has a Aluminium hanger rod of EBCO make. One drawer of size 400(W) x SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required. The wardrobe has a mirror of 4mm thick pasted on the left side door using high quality 3M sticker. The product must be from a manufacturer having ISO 9001, ISO 14001,ROHS, Indian Design Mark, Latest BIFMA and IGBC certificates for few of its products.

Supply & Placement of I.S.I approved Hangout Study Table. Size 1200x600.The table top and gable end are made of 25mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge banding. The modesty panel is made of 18mm thick Prelam Particle Board with both side decorative laminate with matching PVC edge Banding.One storage unit of size 400(W)x450(D)x710(H) has been considered. All side panels, shelves and drawer facia are made of 18mm thick Prelam Particle Board with both side decorative laminate with matching PVC edge Banding. The drawer will have a multipurpose lock of EBCO premium make. One number Marker and Pin up board has been considered as per the size mentioned. The pin-up and marker board is screwd to 18mm thick panel made of prelam particle board. However, none of the screws are visible from the outside/ user side. THe complete system has to be mounted on the wall using necessary hardware and brackets. The pin-up is made up of 12mm soft board wrapped with Fabric certifies as per BS EN 1021-1 : 1994 and BSEN 7176 : 1995 for flammability. The marker is made up of 12mm thick MDF with 0.8mm Marker laminate and 0.8mm backing laminate. All exposed edges are sealed with 0.8mm thick PVC edge banding. The individual sizes of Pin-up and marker board is 600x450x13mm (t). The product must be from a manufacturer having ISO 9001, ISO 14001,ROHS, Indian Design Mark, Latest BIFMA and IGBC certificates for few of its products.

Supply & placement of I.S.I approved Wudmate witharm wooden chair made of red Miranti wood as per drawing. Back : Height: 1000mm x width: 425mm Seat: Height: 450mm x 480mm. All wooden part will be as per drawing. Seat will be covered by foam wrapped with fabric as per required colour. The product must be from a manufacturer having ISO 9001, ISO 14001,ROHS, Indian Design Mark, Latest BIFMA and IGBC certificates for few of its products.

I.S.I approved Coffee table of size 800W x 800D with glass top and SS understructure. The product must be from a manufacturer having ISO 9001, ISO 14001,ROHS, Indian Design Mark, Latest BIFMA and IGBC certificates for few of its products.

Supply and Placement of I.S.I approved Hangout Dressing Table unit. Size 400(W)x400(D)x1800(H). It is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The unit has one drawer and one shelf. The dressing table has a mirror of 4mm thick pasted on 18mm thick prelam particle board attached to the base unit.The mirror suze considered is 1155x360x4(t). The mirror has been pasted using high quality 3M sticker. The product must be from a manufacturer having ISO 9001, ISO 14001,ROHS, Indian Design Mark, Latest BIFMA and IGBC certificates for few of its products.

Supply and Placement of I.S.I approved Get Together 4 Seater Canteen Table:- 1200x800x740 (H) mm. The table is made of membrane finish as per requirement for the ease of cleaning . Understructure:-The Understructure is SS. The product must be from a Manufacturer having ISO 9001, ISO 14001,ROHS, Indian Design Mark, Latest BIFMA and IGBC certificates for few of its products.

Supply and Placement of I.S.I approved Spice Cafeteria chair PP Seat and Backrest on Chrome Plated Understructure.Depth of Seat:-407mm. Backrest width:-330mm(max). Width of Seat:-405mm(max). Seat to backrest height:-385mm. The product must be from manufacturer having ISO 9001, ISO 14001,ROHS, Indian Design Mark, Latest BIFMA and IGBC certificates for few of its products.

I.S.I approved Sofa-Alysia 3 seater( 2 seater:- 760mm(H)x 850(W)x 2015(L).Frame:- Inner solid frame structure made of high quality wood. The wood is kiln chemical treated tropical Meranti wood. Legs:- The legs are made of rubberwood having melamine matt finish. Seating Cushions:- The seat cushion made of 7 inches multi layered foam of density 32D 23D 32D and HD with polyester polyfill outerlayer of 180gsm. The polyester polyfill keeps the upholstery wrinke free and soft. The seating cushions have 3 inches of elastic webbing of 350gsm with diagonal weave. The thread used in nylon bonded to provide lasting stitch strength. Backrest:- the Backrest has a 3 inch foam of 23D with polyester polyfill outer layer of 180gsm. The polyester polyfill keeps the upholestery wrinke free and soft. The seating cushions 2inches of elastic webbing of 250gsm with diagonal weave. The thread used is nylon bonded to provide lasting stitch strength. Outer finish:- The Outer finish has a superior quality leatherette stitched with nylon bonded thread and stained solid wooden legs. Manufacturer having ISO 9001, ISO 14001,ROHS, Indian Design Mark, Latest BIFMA and IGBC certificates for few of its products.

Curtains Cotton make

Curtains Net make

Installation, fixing of DRY CHEMICAL POWDER Fire Extinguisher conforming to IS:2171 with ISI mark and CO2 certidge will be conforming to IS:4947 with ISI mark, Power will be conforming to IS:4308 with ISI mark (10 kg) BRAND: FIRESTOP / FIRE ND / FIRE SHIELD.

M/S ELITE AGENCY