SE/KEDC/KPM/OT.07/ 2020.2021.Civil

Amount

Supplying and fixing the Industrial type horizontal three phase distribution board with MCBS 4 way / 18 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and ntural links with threephase MCB outgoings and separate 4 way provision for accommodating one no 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating one no. 4 pole ELCB / RCD of approved quality and make and provisions for taking up cable for size not less than 35 Sq.mm on suitable angle iron frame work MS cble entry boxes with PWD earthing, fixing on the wall with all connection properly including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site.

Supplying and Providing open wiring to the Fan points, tube light points, bulk head points with approved quality 2 x 2.5 sq.mm PVC unsheathed SC copper cable of 650v grade along with 1.0 sq.mm PVC unsheathed SC copper cable for earthing inside the suitable PVC rigid pipe with necessary bends, tees, junction box, ceiling house, houlders, etc, 5 Amps. single pole switch of approved quality fixing in a 3 mm thick hylum sheet cover with T.W. switch box of suitable size, etc, including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site and jointing properly and making required holes in masonry or concrete and restoring the dismantled surface to original condition complete in all aspects.

Supplying and fixing of 20 Watt Special Type LED Light fitting of approved quality fixing in the existing wall / False Ceiling with all connection properly including cost of all materials, lead, lift, labour, testing, etc., complete as directed by the Engineer at site.

Supplying and fixing and testing of A.C. Ceiling fan complete 1200mm (48") sweep with Down rod, regulator of approved quality fixing in the existing pipe / ceiling with all connection properly including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site.

Supplying and Providing open wiring to the 5 Amps. plug points,with approved quality 2 x 2.50 sq.mm PVC unsheathed SC copper cable of 650v grade along with 1.0 sq.mm PVC unsheathed SC copper cable for earthing inside the suitable PVC rigid pipe with necessary bends, tees, junction box, etc, 5 Amps. single pole switch and 3/5 pin plug of approved quality fixing in a 3 mm thick hylum sheet cover with T.W. switch box of suitable size, etc, including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site and jointing properly and making required holes in masonry or concrete and restoring the dismantled surface to original condition complete in all aspects.

Colour washing the interior and exterior wall surface using approved good quality Acrylic Emulsion paint two coats over a coat of wall primer. Before painting the wall surface should be properly cleaned and the wall surface should be applied the approved quality wall putty neatly,[ patch work only ] etc, including cost of all materials, lead, lift, labour, scaffolding charge, etc., complete as directed by the Engineer at site.

Painting the iron works with Two coats of approved quality Enamel paint over a coat of red oxide primer including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site.

SGST PERCENTAGE IN FIGURES

CGST PERCENTAGE IN FIGURES

BLUE STONE CONSTRUCTION