Repair/maintenance of steel/wooden furniture at AFS Amla

Amount

Material and labour for repairing the CHAIR DINING made out of 1st class teakwood best quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced part of the furniture complete all as per drawing and as directed. DRG NO: FD-228, FD-279

Front Leg

Rear Leg

Side rail / Front rail and rear rail of seat Frame

Back batten

Stiffener

Material and labour for repairing the CHAIR DINING JCO/ORs made out of 1st class teakwood best quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced parts complete all as per drawing and as directed. DRG NO: FD-MAP-II/05

Front Leg

Rear Leg

Side rail / Front rail of seat Frame

Back rail of seat Frame

Back batten

Stiffener

PVC Seat 4mm thick with holes (Seat Shall be of 4X10MM THICK RIBBS MOULDED ALONGWITH SEAT IN SINGLE PIECE) including stainless steel screws fixed to frame.

Nylon Buffers

Material and labour for repairing the chair dining OFFICERS made out of 1st class teakwood best quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced parts complete all as per drawing and as directed. DRG NO: FD-MAP-II/04

Front legs.

Rear legs.

Front/Side rails for seat Frame.

Back rails.

TW Stopper fixed with Main Frame and Legs.

TW Back Batten.

Curved TW Vertical Strips.

Stiffener.

Cushion Seat (Seat Shall be of 75mm thick 40 Density Foam with superior quality Fabric of Approved shade on 12 mm thick BWR phenol bonded plywood)

Nylon Buffers.

Material and labour for repairing the Chair Writing /Chair CB Office made out of 1st class teakwood best quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced parts complete all as per drawing and as directed. DRG NO: FD-280, WDF-10, DB-2124

Front legs.

Rear legs.

Side rails for seat frame with suitable hole for canning

Front and back rails with suitable hole for canning

Stiffener.

Back batten.

Material and labour for repairing the Chair Easy made out of 1st class teakwood best quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced parts complete all as per drawing and as directed. DRG NO: FD-229

Front legs

Rear legs

Side rails of seat frame with suitable hole for canning

Front and back rails of seat frame with suitable hole for canning.

Back seat (upper & lower) rails

Stiffener

Back seat side rails

Material and labour for repairing the Stool Dressing made out of 1st class teakwood best quality including replacing the following unserviceable parts after dismantling the stool dressing as required and reassembling complete including polishing the replaced parts complete all as per drawing and as directed. DRG NO: FD-282

Front and back (long side) rails with suitable hole for canning

Side (short) rails with suitable hole for canning.

Stiffener

Recanning of all type of chairs seat and back, Bin Soiled linen and stool dressing to be woven with cane plastic 2mm wide with a border of 4mm wide plastic cane all round in Godrej pattern complete all as specified and directed. Note :- (i) Canning shall be done in "GODREJ PATTERN" (ii) The make of cane shall be of "MPI/ SHAH/ PREMEIR/ SWASTIC"

Material and labour for repairing the Hat stand with Mirror made out of 1st class teakwood best quality including replacing the following unserviceable parts after dismantling the Hat stand as required and reassembling complete including polishing the replaced parts complete all as per drawing and as directed. DRG NO: FD-233

5mm thick mirror with suitable beading support and back ply Make of Mirror:- Modiguard/ Atul/ Saint Gobbain

Copper Oxidised Steel Pegs (superior quality)

Front side of hat stand, shall be made out of 3/3.5/4mm thick teak face plywood, Make of plywood:- Greenply/Century/Archid/Kitply

Back side of hat stand, shall be made out of 3/3.5/4mm thick commercial plywood, Make of plywood:- Greenply/Century/Archid/Kitply

Wooden frame, shall be made of well seasoned first class teakwood

35x6mm thick teak wood beading alround the Hat stand

TABLE DRESSING GENTS (FD-230): - Supply & fixing of the following unserviceable Components of Table Dresseing Gents, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Supply and fixing in replacement of old unserviceable Mirror, shall be of 5.5 mm thick duly Teak wood frame and 6 mm thick plywood BWR on back side with key plate. Make of Mirror shall be of Modiguard/Atul/Saint Gobbain

Supply and fixing in replacement of old unserviceable Top, shall be of 18 mm thick prelaminated particle board exterior grade one side Teak finish and other side balancing white with 4 mm thick Teak wood edging around.

Supply and fixing in replacement of old unserviceable Bottom, shall be of 18 mm thick prelaminated particle board exterior grade one side Teak finish and other side balancing white with 4 mm thick Teak wood edging around.

Supply and fixing in replacement of old unserviceable sides (left/right), shall be of 18 mm thick prelaminated particle board exterior grade one side Teak finish and other side balancing white with 4mm thick beading of 1st class hard wood for front side as per drawing.

Supply and fixing in replacement of old unserviceable drawers, all as per Drg.

Supply and fixing in replacement of old unserviceable knobs, shall be of 25 mm dia round chromium plated

TABLE DRESSING LADIES WITH MIRROR (FD-251):- Supply & fixing of the following unserviceable Components of Table dressing ladies with mirror including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified.

Supply and fixing in replacement of old unserviceable Mirror, shall be of 5.5 mm thick duly Teak wood frame and 6 mm thick plywood BWR on back side. Make of Mirror shall be of Modiguard/Atul/Saint Gobbain

Supply and fixing in replacement of old unserviceable Top, shall be of 18 mm thick prelaminated particle board exterior grade one side Teak finish and other side balancing white with 4 mm thick Teak wood edging around.

Supply and fixing in replacement of old unserviceable Bottom, shall be of 18 mm thick prelaminated particle board exterior grade one side Teak finish and other side balancing white with 4 mm thick Teak wood edging around.

Supply and fixing in replacement of old unserviceable Legs, shall be used Ist class Hard wood free from crack , knot holes and shape all as per drg.

Supply and fixing in replacement of old unserviceable knobs, shall be of 25 mm dia round chromium plated.

Supply and fixing in replacement of old unserviceable Sliding glass, shall be 5.5 mm thick Make Modiguard or saint gobain Hindustan pilkinten duly machine. .

Supply and fixing in replacement of old unserviceable aluminium channel, as per drg.

Supply and fixing in replacement of old unserviceable back side plywood, as per drg.

SOFA SET SINGLE SEATER (SINGLE PIECE) (FD-281, FD-373) :- Supply & fixing of the following unserviceable Components of Sofa Set Single Seater, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Front/Rear legs.

Front/Side Rail for Seat Frame.

Seat/Back Seat Bearers.

Bottom support.

Bottom, Side and Upper Rails.

Back seat support.

SOFA SET 3 SEATER (SINGLE PIECE) (FD-281, FD-373):- Supply & fixing of the following unserviceable Components of Sofa Set Three Seater, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Front/Rear legs.

Front Rail for Seat Frame.

Side Rails for Seat Frame.

Seat/Back Seat Bearers.

Bottom support.

Side Rails for back frame.

Bottom and Upper Rails for back frame.

Back seat support.

Removing old unserviceable foam cushion of size 560 x 530 x 100mm and supply and fixing new 100mm thick synthetic cushion of existing size of 40 density cool foam for seat and back duly covered with tapestry cloth colour and texture shall be as approved by the GE and shall be used for cover of cushion as specified and shall be of removable type by providing plastic Zip over Tapestry cloth complete all as specified and directed. Make of Foam cushion: Sleep well/Kurlon or equivalent.

Removing unserviceable tapestry cloth from foam cushion of size 560 x 530 x 100mm and covering the same foam cushion with new tapestry cloth of approved colour (followed by stiching with white linen) colour and texture shall be as approved by the GE and shall be used for cover of cushion as specified and shall be of removable type by providing plastic Zip over Tapestry cloth complete all as specified and as directed. Note: Tapestry cloth shall not be less than Rs 300/- per meter of standard width.

TABLE WOODEN 900X600X760MM WITHOUT DRAWER (FD-284): Supply & fixing of the following unserviceable Components of Table Wooden 900x600x760mm without drawer, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Supply and fixing in replacement of old unserviceable table top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Legs made of Teak wood of best quality.

Long rails made of Teak wood of best quality.

Side rails made of Teak wood of best quality.

Stiffener made of Teak wood of best quality.

TABLE WOODEN 900X600X760MM WITH DRAWER (FD-283): Supply & fixing of the following unserviceable Components of Table Wooden 900x600x760mm with drawer, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Supply and fixing in replacement of old unserviceable table top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Supply and fixing in replacement of old unserviceable drawer (Drawer made out of 12mm thick teakwood planks and bottom of the drawer shall be of 6mm thick plywood BWR grade) all as per drawing.

Legs made of Teak wood of best quality.

Long rails made of Teak wood of best quality.

Side rails made of Teak wood of best quality.

Stiffener made of Teak wood of best quality.

TABLE WOODEN 900X900X760MM (FD-291): Supply & fixing of the following unserviceable Components of Table Wooden 900x900x760mm without drawer, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Supply and fixing in replacement of old unserviceable table top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Supply and fixing in replacement of old unserviceable legs made of Teak wood of best quality all as per drawing.

Supply and fixing in replacement of old unserviceable rails made of Teak wood of best quality all as per drawing.

TABLE CENTRE (FD-274): Supply & fixing of the following unserviceable Components of Table Centre, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Supply and fixing in replacement of old unserviceable table Centre top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Legs made of Teak wood of best quality.

Long rails made of Teak wood of best quality.

Stiffener made of Teak wood of best quality.

PEG TABLE (FD - 277): Supply & fixing of the following unserviceable Components of Peg Table, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Peg Table top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Legs made of Teak wood of best quality.

Long rails made of Teak wood of best quality.

Stiffener made of Teak wood of best quality.

TABLE BED SIDE (FD - 276): Supply & fixing of the following unserviceable Components of Table Bed Side, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Supply and fixing in replacement of old unserviceable Table Bed Side top/Bottom of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Supply and fixing in replacement of old unserviceable Sides made of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak around front side as per drawing.

Supply and fixing in replacement of old unserviceable Shelves made of 12mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak around front side as per drawing.

Supply and fixing in replacement of old unserviceable Back Ply made of 6mm thick commercial plywood as per drawing.

BOOK CASE (FD - 237): Supply & fixing of the following unserviceable Components of Book Case, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Supply and fixing in replacement of old unserviceable Book Case top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Supply and fixing in replacement of old unserviceable Book Case Bottom of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Supply and fixing in replacement of old unserviceable Book Case Sides/Vertical Compartment made of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak around front side as per drawing.

Supply and fixing in replacement of old unserviceable Book Case Upper Shelf of Right Side made of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak around front side as per drawing.

Supply and fixing in replacement of old unserviceable Book Case Middle Shelf made of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak around front side as per drawing.

Supply and fixing in replacement of old unserviceable Book Case Middle Vertical Compartment (Small) made of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak around front side as per drawing.

Supply and fixing in replacement of old unserviceable Book Case Shutter (Including necessary continious piano type hinges) made of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Supply and fixing in replacement of old unserviceable Left side Box Shelf made of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak around front side as per drawing.

Supply and fixing in replacement of old unserviceable Back Ply made of 6mm thick commercial plywood as per drawing.

Legs made of teak wood.

Long rails of bottom made of teak wood .

Side rails of bottom made of teak wood.

TEAPOY WOODEN (FD-278) : Supply & Fixing of the following unserviceable components of teapoy wooden including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Teapoy top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Long rails

Stiffener

TABLE WRITING (FD-275): Supply & fixing of the following unserviceable Components of Table Writing, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Table top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Long rails

Short rails

Supply and fixing in replacement of of old unserviceable drawer (Drawer made out of 12mm thick teakwood planks and bottom of the drawer shall be of 6mm thick plywood BWR grade) all as per drawing .

Supply and fixing in replacement of old unserviceable sides (Left and Right) of Box made of 18mm thick prelaminated particle board exterior grade all as per drawing.

Supply and fixing in replacement of old unserviceable bottom of Box made of 18mm thick prelaminated particle board exterior grade all as per drawing.

Supply and fixing in replacement of old unserviceable Self of Box made of 12mm thick prelaminated particle board exterior grade all as per drawing.

Handles.

Supply and fixing in replacement of old unserviceable back side of box made of 6mm thick plywood commercial all as per drawing.

Supply and fixing in replacement of old unserviceable shutter made of 18mm thick prelaminated particle board and brass locking system Make: Godrej/Harison or equivalent and piano type butt hinges all as per drawing.

TABLE DINING FOR FOUR PERSONS 1200X900MM (FD/MAP-II/03): Supply & fixing of the following unserviceable Components of Table Dining Four Person, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Table top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Long rails

Short rails

TABLE DINING FOR SIX PERSONS (FD - 273): Supply & fixing of the following unserviceable Components of Table Dining Six Person, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Table top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Legs made of Teak wood.

Long rails made of Teak wood.

Short rails made of Teak wood.

TABLE DINING FOR EIGHT PERSONS (FD - 273): Supply & fixing of the following unserviceable Components of Table Dining Eight Person, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Table top of 18mm thick prelaminated particle board exterior grade with 6mm beading of 1st class hard wood teak all round as per drawing.

Long rails

Short rails

SIDE BOARD (FD - 241): - Supply & fixing of the following unserviceable Components of Side Board, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Supply and fixing in replacement of old unserviceable top made of 18mm thick exterior grade and one side teak face prelaminated particle board with 6mm beading of 1st class hard wood teak for front side as per drawing.

Supply and fixing in replacement of old unserviceable sides made of Prelaminated Particle board of thickness 18mm with 6mm beading of 1st class hard wood teak for front side as per drawing.

Supply and fixing in replacement of old unserviceable back sides made of 6mm thick plywood commercial as per drawing.

Supply and fixing in replacement of old unserviceable shutter made of 18mm thick exterior grade and one side teak face prelaminated particle board with piano type hinges medium weight and brass knob and tower bolt of size 50mm long all as per drawing.

Lock brass of superior quality Make: Harrison/Godrej or equivalent

Supply and fixing in replacement of old unserviceable drawer (Drawer made out of 12mm thick teakwood planks and bottom of the drawer shall be of 6mm thick plywood BWR grade) all as per drawing.

Legs made of teak wood.

Long rails of bottom made of well seasoned teak wood of 1st quality.

Side rails of bottom made of teak wood.

LOCKER BED SIDE (DB-4074): - Supply & fixing of the following unserviceable Components of Locker Bed Side, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of 1st class teakwood as shown in drawing, complete all as specified and directed.

Supply and fixing in replacement of old unserviceable doors of left and right side (2 leaves) made of 18mm thick exterior grade and one side teak face prelaminated particle board with 6mm beading of 1st class hard wood teak alround and providing new MS Butt Hinges 50mm long 02 Nos in each leaves, 100mm long Hasp & Stapple, 100mm long anodised handle complete all as per drawing and directed.

Supply and fixing in replacement of old unserviceable back sides made of 6mm thick plywood commercial all s per drawing and directed.

Supply and fixing in replacement of old unserviceable top made of 18mm thick exterior grade and one side teak face prelaminated particle board with 6mm beading of 1st class hard wood teak for front side as per drawing.

Supply and fixing in replacement of old unserviceable bottom made of 18mm thick exterior grade and one side teak face prelaminated particle board with 6mm beading of 1st class hard wood teak for front side as per drawing.

Legs made of teak wood.

Long rails of bottom made of well seasoned teak wood of 1st quality.

Side rails of bottom made of teak wood.

Charpoy GI Pipe 32mm with Plywood Top (FD-220) : Removing following unserviceable items of Charpoy GI Pipe 32mm without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed.

Removing of old unserviceable Plywood 12mm thick from charpoy GI Pipe 32mm and tightening the frame and making it suitable for fixing New plywood Top and providing 12mm thick plywood BWR grade type 'A' confirming to IS-303 of 1975 (ISI Marked) size 1980x900mm fixed with existing pattern including nutt, bolt, washers and necessary drilling on each rails/Stiffener of GI Charpoy. All as specified and directed. Make of Plywood: Anchor/Kitply or equivalent as approved NOTE: PARTS/COMPONANTS REPLACED SHALL BE MEASURED UNDER RESPECTIVE ITEMS

Suppy & Fixing Stiffener 25mm Square conduit pipe of 1.6mm thick welded to GI Charpoy frame perpendicular to long rail of approprate size making holes 02 Nos (Including Nut bolt & washer) and preparation of New Steel surfaces and applying two coats of synthetic enamel black paint over a coat of redoxide primer. Make of Paint: Berger (Luxol)/Asian (Apcolite)/ Johnson & Nikolson (Brolac)

Supply and fixing in replacement of 32mm dia medium grade GI elbow three ways all as specified and directed.

Supply and fixing in replacement of 32mm dia 6mm thick check nut all as specified and directed.

BED PLYWOOD TOP (FD - 247 & 246) : Removing following unserviceable items of bed ply wood top without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed.

Supply and fixing in replacement of all broken worn out component of head board and provide frame with 1st class teak wood including 2nd class hardwood battens between frame and teak face veneer ply ISI marked with half round teakwood edging all as specified in drawing and as directed.

Supply and fixing in replacement of all broken worn out component of foot board and provide frame with 1st class teak wood including 2nd class hardwood battens between frame and teak face veneer ply ISI marked with half round teakwood edging all as specified in drawing and as directed.

Supply and fixing in replacement of old unserviceable long rails all as per drawing made of well-seasoned Teak wood of best quality.

Supply and fixing in replacement of old unserviceable stiffener all as per drawing made of well seasoned Teak wood of best quality.

Supply and fixing in replacement of old unserviceable, worn out ply wood 12mm thick BWR plywood ISI Marked confirming to IS-303 all as per drawing. Make of Plywood: Anchor/Kitply or equivalent as approved.

BED HARD STEEL (FD/E6/MAP/08R) : Removing following unserviceable items of bed hard steel without disturbing the other parts and supply and fixing with new items as specified made to shape & size all as per drawing and as directed.

Supply and fixing in replacement of old unsv Prelaminated Particle Board with PVC Edging Screwed to MS Strip of head board all as per drawing.

Supply and fixing in replacement of old unsv Prelaminated Particle Board with PVC Edging Screwed to MS Strip of Foot board all as per drawing.

Supply and fixing in replecement of 20mm x 45mm of 18 gauge MS Strip (Including necessary welding) all as per drawing and as directed.

M & L for fixing (only) of long rails (Including necessary welding/Nut & Bolts) to Head Board and Foot Board as directed.

Supply and fixing in replacement of old unserviceable stiffener (including welding) made of 25mm x 25mm Square MS Pipe (18 Gauge) all as per drawing and as directed.

Supply and fixing in replacement of old unserviceable ply wood 12mm thick plywood BWR ISI Marked confirming to IS-303 all as per drawing. Make of Plywood: Anchor/Kitply or equivalent as approved.

Supply and fixing in replacement of old unserviceable Hard rubber Shoes of Size 38mm x 38mm (Inner Size) all as per drawing.

CHARPOY IP WITH HARD TOP (FD/MAP-II/01) : Removing following unserviceable items of Charpoy IP with Hard Top and supply and fixing with new items as specified all as per drawing and as directed.

Supply and fixing in replacement of stiffener (including welding) made of 25mm square MS Pipe (16 Gauge) all as per drawing and as directed by Engr-in-Charge.

Supply and fixing in replacement of ply wood 12mm thick BWR ISI Marked all as per drawing. Make of Plywood: Anchor/Kitply or equivalent as approved.

Supply and fixing in replacement of thick Hard rubber Shoes of Size 32mm Square (Inner Size) all as per drawing.

Repairs to Almirah large Steel (FD-1031, FD-1033, FD/E6/MAP/18):

Removing existing unserviceable three way locking device and providing new locking device including welding of rods, box etc complete all as directed.

Removing existing unserviceable handles and supply & fix new handles as per drg and all as directed. Make: Godrej or equivalent

Removing unserviceable foot rest and supply & fix new foot rest as per sample duly made to shape and painted with two coats of synthetic enamel paint OG/Gray over a coat of red oxide primer to match with existing complete as directed.

Removing unserviceable lock and replacing fixing new brass body four lever lock with duplicate key for Almirah large Steel all as per directed . Make of Locks: Harrison/Godrej or equivelent

Removing unserviceable shutter and supply & fix new shutter 1.00 mm thick MS duly made shape and painted with two coats of synthetic enamel paint OG/Gray over a coat of red oxide primer to match with existing complete as per drawing and all as directed.

Removing unserviceable shelves and supply & fix 1.00 mm thick MS new shelves as per sample duly made to shape and painted with two coat of red oxide primer to match with existing complete. Cleats/nuts, bolts to be provided by the contractor as per drawing all as directed.

Repairs to Almirah medium/Small Steel (FD-1032, FD-1034)

Removing existing unserviceable three way locking device and providing new locking device including welding of rods, box etc complete all as directed.

Removing existing unserviceable handles and supply & fix new handles as per drg and all as directed . Make: Godrej or equivalent

Removing unserviceable foot rest and supply & fix new foot rest as per sample duly made shape and painted with two coats of synthetic enamel paint OG/Gray over a coat of red oxide primer to match with existing complete as directed.

Removing unserviceable lock and replacing fixing new brass body four lever lock with duplicate key for Almirah large Steel all as per directed. Make of Locks: Harrison/Godrej or equivelent

Removing unserviceable shutter and supply & fix new shutter 1.00 mm thick MS duly made to shape and painted with two coats of synthetic enamel paint OG/Gray over a coat of red oxide primer to match with existing complete as per drawing and all as directed.

Removing unserviceable shelves and supply & fix 1.00 mm thick MS new shelves as per sample duly made shape and painted with two coat of red oxide primer to match with existing complete. Cleats/nuts, bolts to be provided by the contractor as per drawing all as directed.

Repairs to Table dining ORs (FD-165)

Removing old unserviceable Top and fixing new Top 19mm thick MDF board with 22 Gauge Stainless Steel sheet on Top all as per drawing all as directed.

Repairs to Table Clerk Steel (FD-381, FD-1004)

Removing old unserviceable top 18mm thick prelaminated particles board exterior grade and fixing new top including PVC beading all round as per drawing and all as directed.

Removing old unserviceable drawers and supply & fixing 1.00 mm thick new drawers as per existing duly made shape and painted as per drawing all as directed.

Removing old unserviceable drawer locks and supply & fix new locks with duplicate keys complete Make of Locks: Harrison/Godrej or equivelent

Adjustment of drawer to easy functioning and necessary denting/ welding and repairing of bottom channel as per drawing and as directed.

Repairs to Table Office Officer Steel (FD-1002, FD-1003)

Removing old unserviceable top 18mm thick prelaminated particles board exterior grade and fixing new top including PVC beading all round as per drawing all as directed.

Removing old unserviceable drawers and supply & fixing 1.00 mm thick new drawers as per existing duly made shape and painted as per drawing all as directed.

Taking out old unserviceable drawer locks and supply & fix new locks with duplicate keys complete. Make of Locks: Harrison/Godrej or equivelent

Adjustment of drawer to easy functioning and necessary denting/ welding and repairing of bottom channel as per drawing and as directed.

Repairs to Teapoy Verandah (FD-255, FD-383)

Removing old unserviceable top 18mm thick prelaminated particle board exterior grade and fixing new top including 3mm thick TW beading all round as per drawing and as directed .

Removing old unserviceable MS Legs and supply and fixing New MS Legs of complete length duly painted all as per drawing and as directed.

Removing old unserviceable PVC Shoe and Supply & Fixing New PVC shoe for legs at bottom in place of old torn out shoe 25 mm dia complete.

Repairs to Teapoy Verandah (FD/E6/MAP/17)

Removing old unserviceable top 18mm thick prelaminated particle board exterior grade and Supply & fix new top including PVC beading all round as per drawing and as directed. .

Removing unserviceable Hard Rubber Shoes of Teapoy Verandah and supply and fix in replacement of Hard Rubber Shoes of Teapoy Verandah all as per Drg and as directed.

REPAIRS TO TABLE OFFICE OFFICER STEEL/TABLE OFFICE CLERK STEEL/TABLE DINING ORS AND FOAM WITH/WITHOUT BACK STEEL

Removing old unserviceable components i.e. Legs, Top Long Rail, Top Short Rail, Top Stiffener, and bottom stiffener complete of table office officer steel/table office clerk steel and Foam with/without Back and supply and fixing new legs, top long rail, top short rail, top stiffener and bottom stiffener completer made out of 25mm square conduit 1.6mm thick duly painted as per drg and directed .

Removing old unserviceable PVC Shoes of table office officer steel/table office clerk steel/table dining ORs and Foam with/without Back and supply and fixing new PVC Shoes 25mm complete.

Repairs to Locker Bed Side Steel (FD-1029)

Removing existing unserviceable socket of CP rod and S & F new socket for Hanging rod 20 mm dia.

Removing unserviceable hasp & staple and S & F new hasp & staple of 75 mm x 40 mm x 3 mm, all as specified and shown on drawing as directed.

Removing unserviceable CP handle and S & F new CP handle 100 mm long for locker steel all as specified and shown on drawing as directed.

Removing unserviceable shutter of Locker Bed Side steel and Supply and Fixing new shutter for locker steel all as specified and shown on drawing as directed.

Removing old unserviceable shelves of Locker Bed Side steel and Supply and Fixing new shelves for locker steel all as specified and shown on drawing as directed.

Removing U/S legs of locker bed side steel and S&F new leg of U shape channel 100 mm height & 60 mm wide ends plugged with 1 mm thick mild steel sheet duly welded at both all as specified and as shown on drawing as directed.

Removing existing unserviceable CP pipe and S & F 20 mm dia CP steel conduct pipe of 1.6 mm thickness.

Repairs to Book Case Steel (Glass Door) (TP, FD-1028)

Removing unserviceable MS Channel and Supply and Fixing New MS Channel complete ( including necessary welding and Roller ) all as per drawing and as directed.

Removing unserviceable 3mm Plain Glass and Supply and Fixing New 3mm Plain Glass all as per drawing and as directed.

Removing unserviceable Sliding Shutter and Supply and Fixing New Sliding Shutter of 1 mm thick MS Sheet (Including Glass, Lock, and Two Handles) all as per drawing and as directed.

Removing unserviceable Locks and Supply and Fixing New Lock with duplicate keys all as per drawing and as directed. Make-Harrison/Godrej or equivalent.

Removing unserviceable Handles and Supply and Fix New Handles of 100mm all as per drawing and as directed .

Removing unserviceable Shelves and Supply and Fix New Shelves of 1mm thick MS Sheet all as per drawing and as directed .

Removing unserviceable Extra Piece (welded to Sheet Cover) and Supply and Fix New 1mm thick MS Sheet Extra Piece welded to Sheet Cover all as per drawing and as directed.

Removing unserviceable Iron Cleat Stopper and Supply and Fix New Iron Cleat Stopper of size 20 x 10mm all as per drawing and as directed .

Repairs to Chair Verandah (FD-359): -

Removing unserviceable legs of chair verandah and supply and fixing in replacement of leg frame of size 20mm dia 16 gauge of MS conduit pipe with hard rubber shoes and welding in running hand all as per drg and as directed.

Removing existing unserviceable cane from Chair verandah steel and weaving the same with plastic cane 4 mm wide half round of approved quality duly applying Two coat of synthetic enamelled white paint of approved quality to the steel surfaces of chair before canning. NOTE :- (i) Canning shall be done in "GODREJ PATTERN" (ii) The cane shall be of "AJAY/MPI/SHAH GARWARE or equivalent"

Removing unserviceable Hard Rubber Shoes and supply and fix in replacement of Hard Rubber Shoes of appropriate size all as per drg and as directed.

Repairs to Chair Verandah (FD/MAP-II/06): -

Removing unserviceable PVC Seat of chair verandah and supply and fixing in replacement of PVC Seat 4mm thick with weight not less than 1.85 Kgs and Groves 90 x 10mm 10 Nos on Seat all as per Drg and as directed .

Removing unserviceable PVC Back of chair verandah and supply and fixing in replacement of PVC Back 4mm thick with weight not less than 1.85 Kgs and Groves 90 x 10mm 10 Nos on Back all as per Drg and as directed .

Removing unserviceable Hard Rubber Shoes and supply and fixing in replacement of Hard Rubber Shoes of appropriate size all as per drg and as directed .

Repairs to Chair CB Steel with/without Arms {FD-75 (M)}

Replacement of Flat iron support of 25/20 x 5mm and 50mm long fixed to frame of chair CB Steel with Arms /without Arms including applying two coats of synthetic enamel OG/Gray paint over a coat of red oxide primer all as directed.

Replacement of seat made from 2nd class hardwood teak duly canned in 'Godrej' pattern with 1.6mm plastic canned duly finished chair CB Steel with or without Arms as per drg and all as directed.

Replacement of back made from 2nd class hardwood teak duly canned in 'Godrej' pattern with 1.6mm plastic canned duly finished chair CB Steel with or without Arms as per drg all as directed.

Replacement of handles for chair CB Steel with Arms made from 2nd class hardwood teak duly finished complete for chair CB Steel with Arms as per drawing all as directed .

Replacement of old unserviceable PVC Cap (02 Nos in Each Chair) and Stud (04 Nos in Each Chair) to legs of Chair CB steel with/without Arms of best quality as per drawing complete.

Repairs to Computer Chairs (TP)

Removing old unserviceable Seat of Computer Chair and supply & fixing New Seat of Computer Chair all as per drawing. Note: Seat Shall be 50mm thick respectively synthetic foam of 32 density fixed over 12mm thick plywood commercial and shall be stitched with superior quality tapestry cloth of approved shade, texture and quality.

Removing old unserviceable Back of Computer Chair and supply & fixing New Back of Computer Chair all as per drawing. Note: Back Shall be 25mm thick respectively synthetic foam of 32 density fixed over 12mm thick plywood commercial and shall be stitched with superior quality tapestry cloth of approved shade, texture and quality .

Removing old unserviceable Arms rest of Computer Chair and Supply & Fixing New Arms Rest of Computer Chair all as per Drawing and directed. Note: Arm Rest shall be polyurethene "D" Shape.

Removing old unserviceable Revolving Wheels of Computer Chair and Supply & Fixing New Revolving Wheel of Computer Chair all as per drawing and directed .

Removing old unserviceable padestal Assembly and Supply & Fixing New Steel padestal Assembly of Computer Chair all as per drawing and directed.

Removing old unserviceable Hydrolic System (Air Soft) and Supply & Fixing New Hydrolic System (Air Soft) of Computer Chair all as per drawing and directed .

Repairs to Computer Chairs (FD/E6/MAP/01)/ Repairs to Chair Revolving Executive High Back (TP)

Removing old unserviceable Seat of Chair Computer/Chair Executive and supply & fixing New Seat of Chair Computer/Chair Executive all as per drawing & as directed. Note: Seat Shall be fixed over 12mm thick Hot Pressed plywood commercial and shall be upholstered with superior quality tapestry and moulded polyurithane foam 75mm thick of 32 density with PVC Lipping all round, cloth of approved shade, texture and quality .

Removing old unserviceable Back of Chair Computer/Chair Executive and supply & fixing New Back of Chair Computer/Chair Executive all as per drawing & as directed. Note: Back Shall be fixed over 12mm thick Hot Pressed Plywood Commercial and shall be uplolstrered with superior quality tapestry and moulded polyurithance foam 25mm of 32 density and shall be disigned with contour lumber support for Extra comfort with PVC Lippling all round, cloth of approved shade, texture and quality .

Removing old unserviceable Arms rest of Chair Computer/Chair Executive and Supply & Fixing New Arms Rest of Chair Computer/Chair Executive all as per Drawing and directed. Note: Arm Rest shall be polyurethene "D" Shape Black integral Skin polyurethane reinforced with MS insert. It shall be Scrach and weather resistant.

Removing old unserviceable Revolving Wheels of Chair Computer/Chair Executive and Supply & Fixing New Revolving Wheel of Chair Computer/Chair Executive all as per drawing and directed.

Removing Old unserviceable Hydrolic System (Air Soft) and supply and fixing New Hydrolic System (Air Soft) all as per Drawing and Directed.

Removing Old unserviceable padestal Assembly and supply and fixing new Steel Padestal Assembly all as per drawing and as directed by Engr in charge..

Repairs to Chair School With Hand Board (FD/E-6/MAP/05)

Removing unserviceable PVC Seat of Chair School with Hand Board and supply and fixing in replacement of PVC Seat (Made of Blow Plast or equivalent) of Chair School with Hand Board all as per Drg and as directed .

Removing unserviceable Writing Board of Chair School with Hand Board and supply and fixing in replacement of Writing Board (Made of 18mm thick Extrerior grade Prelaminated Paritcle Board one Side Teak Finish other side Balancing White with 1mm thick PVC beading allround) of Chair School with Hand Board all as per Drg and as directed .

Removing unserviceable Hard Rubber Shoes of Chair School with Hand Board and supply and fixing in replacement of Hard Rubber Shoes of Chair School with Hand Board all as per Drg and as directed.

Repairs to Table Bed Side (FD/E-6/MAP/15®)

Removing old unserviceable top 18mm thick prelaminated particles board exterior grade and Supply & fixing new top including PVC beading all round as per drawing and all as directed.

Removing old unserviceable Sides 18mm thick prelaminated particles board exterior grade and Supply & fixing new Sides including PVC beading all round as per drawing and all as directed .

Removing old unserviceable Top Back 18mm thick prelaminated particles board exterior grade and Supply & fixing new top back including PVC beading all round as per drawing and all as directed .

Removing old unserviceable Parts of Top drawers and supply & fixing new parts of top drawers (Including necessary T/W runner) as per existing duly made shape as per drawing all as directed.

Removing old unserviceable Parts of Bottom drawers and supply & fixing new parts of bottom drawers (Including necessary T/W runner) as per existing duly made shape as per drawing all as directed .

Removing old unserviceable Back 6mm thick Plywood and Supply & fixing new Back 6mm thick BWR Plywood as per drawing and all as directed .

Removing old unserviceable 18mm Square Pipe and Supply & fixing new 18mm square pipe 18 gauge (Including necessary weldings & screws) as per drawing and all as directed.

Removing old unserviceable Hard Rubber Shoes of Table Bed Side and supply and fixing in replacement of Hard Rubber Shoes of Table Bed Side all as per Drg and as directed.

Repairs to Table Computer (FD/E6/MAP/03, TP)

Removing old unserviceable top 18mm thick prelaminated particles board exterior grade and Supply & fixing new top including PVC beading all round as per drawing and all as directed..

Removing old unserviceable Nylon Buffers and Supply & fixing new Nylon Buffers as per drawing and all as directed .

Note:- (i) All wooden parts replaced under this works shall of 1st class hard teak wood unless otherwise mentioned. (ii) The amount against Schedule of Credit on Page No. ____ shall be deducted from the total amount quoted against Sch 'A' while deriving the Contarct Sum for Acceptance.

HINDUSTAN ENGINEERING WORKS