SPECIAL REPAIR TO ROADS FROM ASC CHOWK TO TCP-2 AT MILITARY STATION SRI GANGANAGAR

Amount

Dismantling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, apron etc laid dry & pointed complete all as specified and as directed by Engineer-in-charge.

Dismantling of precast concrete articles , kerb stone, block walling, brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-charge.

Surface dressing n. exc 15cm deep in soft/ loose soil including levelling, watering, compacting by road roller 8 to 12 tonne capacity and removal of excavated surplus soil to a distance n.exc 50mtr depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for 80mm thick precast machine pressed concrete interlocking paving blocks M-40 grade using grey cement and pigment to match the colour of paver block, of any shape and size conforming to IS 15658-2006 laid over and including 40mm thick layer of sand complete all as specified and directed by Engineer-in-Charge.

M&L for 60mm thick precast machine pressed concrete interlocking coloured glossy finished/ ruberised paving blocks M-35 grade using grey cement and pigment to match the colour of paver block, of any shape and size conforming to IS 15658-2006 laid over and including 40mm thick layer of sand complete all as specified and directed by Engineer-in-Charge.

M & L for (machine made) pre-cast cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in kerb stone of size 300mmx300x100mm with plain fair faces, smooth finish, including chamfering, weathering, throating etc set in cement mortar 1:4, including necessary form work and excavation & earth work for embedding kerb stone at a depth as directed & temping around kerb stone and removal of surplus soil to a distance n.exc 50 metre & depositing where directed complete all as specified and directed by Engineer-in-Charge

M&L for reinforced concrete pipes 200mm bore ISI marked , class NP-2 laid and jointed with collars complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone /boulder masonry, built in cement mortar or cement lime mortar including all quoins, pillars etc of any description and in any position complete all as specified and directed by Engineer-in-Charge.

M&L for Brick work using old size burnt clay subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 10 above but except bricks Note:- Serviceable bricks retrieved vide item No. 9 above shall be reused under this item. complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick rendering on fair faces of brick or concrete surfaces of walls in cement mortar (1:4) finished even and smooth without using extra cement including taking down cement plaster / pointing of any description from brick walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engineer-in-Charge.

M&L for flush pointing to brick walls on flat surface in cement mortar (1:3) complete all as specified and directed by Engineer-in-Chage.

M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in surface channels and drains or similar works, roof kerbs or mud stops, rounded or chamfered on edges finished top surface even and smooth with using extra cement etc. complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered or unplastered surface of walls and applying two coats of cement based paint over one coat of white wash complete all as specified & directed by Engineer-in-Charge.

M & L for painting lines, dashes, arrows, letters etc. on road/path/kerb stone/ pavement and the like exc 10 cm wide using road marking (white/golden yellow/black) paint including preparation o surface complete all as specified and directed by Engineer-in-Charge.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and material & labour for applying evenly a tack coat with bituminous primer (paving bitumen) (VG-10) @ 5Kg/10 Sqm on bituminous surface and M&L for providing 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.50% binder content (Paving Bitumen VG-30) by weight of total mix, laid with self propelled mechanical paver finisher, rolled and compacted to required camber and gradient with power roller complete all as specified and directed by Engineer-in-Charge.

M & L for making of centre line, side line, stop line etc as per IRC pattern with 2mm thick thermoplastic road marking compound of approved quality using 8% mica of white/ yellow colour (colour as approved by Engineer-in-Charge) on bituminous/ concrete road surface of temprature 160ºC with a special applicator machine including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site etc complete all as specified and directed by Engineer-in-Charge. Make : Shivalic/ Kothari/ Jayanti/ Swastic

Taking out existing cat eyes of any description properly without damaging and refixing the same after carpeting of road work with and including fasteners or glue complete all as specified and directed by Engineer-in-Charge.

Taking out existing speed breaker of any description properly without damaging and refixing the same after carpeting of road work with and including fastners and glue complete all as specified and directed by Engineer-in-Charge.

Taking out existing delenators of any description properly without damaging and refixing the same after repairing road work complete all as specified and directed by Engineer-in-Charge.

S&F in repair rectangular dual directional reflective cat eye of size 75mm x75mm of impact resistance ABS plastic stud having ultra violet resistance colour with plastic strip containing 31 mini retro reflective glass beads of colour white/red/yellow to each side and fixed with 12mm dia 120mm long zinc plated steel nails at the centre of cats eye by hammering complete all as specified and directed by Engr-in-ch. Make: Dark Eye Model No.DA-978 or equivalent of International Wire Products/Surya Ent/Greenlite/TATA BP/Sinor Infrastructure

S&F in LED Solar road stud 125mm x 125mm x 25mm made from aluminium alloy and construction powered by mono crystal solar panel with high capacity Ni-Cd rechargeable battery having view distance 1000 meters, LEDs-010mm, 6 pieces for high brightness, 12 hours of continuous lighting at night and can bear upto 25 Ton load complete all as specified and directed by Engineer-in-Charge. Make : Model Dhruv-DA-110 of sinor infrastructure of equivalent model of Dark eye/ /Greenlite/TATA BP

S&F for road side motivation / informatory sign boards made out of 4mm thick ACP retro reflective sheeting of high intensive prismatic grade conforming to IRC of size (24" x 36") with reflective vinyl printing both side and framed properly in 2" bore stainless steel pipes and covered each end with 3" dia stainless steel knob. Height of frame 52" above ground and 18" below ground level firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm including excavation etc. complete all as specified and directed by Engineer-in-Charge.

S&F for road safety sign board / traffic sign board like speed limited, school ahead, go slow etc. as per standard specifictions of IRC. Height of frame made of 50mm bore stainless steel pipe will be 150cm above the Ground Level and 18cm below the Ground Level firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm including necessary excavation etc. complete all as specified and directed by Engineer-in-Charge.

Supplying & fixing delinator made out of acrylic material fitted with high intensity retro reflector in yellow/ red colour fitted on CRCA pipe 40mm dia and 60cm long powder coated or stove enamelled white/ black colour provided with steel wire mesh made up into cage for safety of reflector and embedding the same in PCC (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified & directed by Engineer-in- charge. Make: International Wire Products (Model No. IWP5) or equivalent of Dark Eye/ Surya Enterprises/Greenlite/TATA BP/Sinor Infrastructure Note : Size of PCC block for embedding delinator shall be 30cmx30cmx30cm and cost of PCC shall be included in the unit rate of this item. Note : A sum of Rs. 2,81,450.00 will be deducted on account of credit for scarifying metal / gravel taken down material. Please refer details on Srl Page No. 20(R) (Schedule of Credit) of Tender documents.

M/S KARNI CONSTRUCTION COMPANY

AP BUILDERS

m/s nemichand contractor

Aggarwal brothers and company

M/s Balvinder Singh Engineer and Contractors

M/s Amit Construction Company

KHANNA CONSTRUCTIONS

Krishan Lal Doomra

venkateshwara infra

Pawansut Infra Projects Pvt. Ltd.