SITC for Improvement and Stabilization of HT LT Lines and Sub Stations in Leh District Shifting Re-alignment of existing 11KV Line on 8Mtr Pole with 9Mtr from Cheeta Chowk to Soha Rigpa Junction on full turnkey basis under UT Capex 2025 26

Amount

SUPPLY PART

Supply of 9 Mtr. Long Pole,ST-410 SP33)

GI V cross-arm with top Bracket including clamp as per specification(14.631Kg/complete V-set)

Supply of GI Channel X-arm 1600mm long including clamps and braces (75X40X6mm GI Channel of 1600mm long=40 No.(weight per channel=11.42Kg,back clamp for cantiliver 50X8mm, 365mm long =1.15Kg Total weight=12.57Kg/channel +clamp GI angle 65XiX6mm, 1760mm long =40 nos (weight=10.21Kg, Guy clamp for cantiliver 50X8mm,300mm long=.9Kg, Total weight=11.11Kg Total weight of X-arm and cantiliver=23.68Kg

Supply of 33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

Supply of 33KV Polymeric Composite Disc Insulator 36KN, min failing load 70KN, Lightining Impulse 170KV Positive and 180KV Negative, Creepage distance 900mm

Supply of Galvinized Nuts and Bolts

Supply of Danger Plates with Clamps

Supply of Anti-Climbing Device with Clamps

Supply of Earthing Complete by GI Spiral/Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Supply of Cement bottoming 1:2:4 mix as per REC standards 0.5cum/pole

Supply of GI Channel X-arm including clamps and braces for DP (80Kg/DP)

11KV GO, AB Switch 3-Phase, 3-Pole, 200Amp, vertical Type/Link Set

Galvanised Stay Set with 50x8mm stay clamp, guy Insulator(2Nos), anchor Plate(200x200x6mm), nuts-bolts, 2 Nos turn-Buckles, 1.8m long, 16mm diameter solid GS stayrods & 7/3.15 mm dia GI stranded wire complete

Installation, Testing & Commissioning (LABOUR PART)

9 Mtr. Long Pole,ST-410 SP33)

GI V cross-arm with top Bracket including clamp as per specification(14.631Kg/complete V-set)

Supply of GI Channel X-arm 1600mm long including clamps and braces (75X40X6mm GI Channel of 1600mm long=40 No.(weight per channel=11.42Kg,back clamp for cantiliver 50X8mm, 365mm long =1.15Kg Total weight=12.57Kg/channel +clamp GI angle 65XiX6mm, 1760mm long =40 nos (weight=10.21Kg, Guy clamp for cantiliver 50X8mm,300mm long=.9Kg, Total weight=11.11Kg Total weight of X-arm and cantiliver=23.68Kg

33kV Polymeric composite Pin Insulator 36kV, 10kN, Lighting Impulse 170kV Positive and 180kV Negative, creepage distance 900mm

33KV Polymeric Composite Disc Insulator 36KN, min failing load 70KN, Lightining Impulse 170KV Positive and 180KV Negative, Creepage distance 900mm

Galvinized Nuts and Bolts

Danger Plates with Clamps

Anti-Climbing Device with Clamps

Earthing Complete by GI Spiral/Rod 20mm 2.5 mtr long through GI Strip.

Red Oxide

Aluminium Paint

Cement bottoming 1:2:4 mix as per REC standards 0.5cum/pole

GI Channel X-arm including clamps and braces for DP (80Kg/DP)

11KV GO, AB Switch 3-Phase, 3-Pole, 200Amp, vertical Type/Link Set

Galvanised Stay Set with 50x8mm stay clamp, guy Insulator(2Nos), anchor Plate(200x200x6mm), nuts-bolts, 2 Nos turn-Buckles, 1.8m long, 16mm diameter solid GS stayrods & 7/3.15 mm dia GI stranded wire complete

Dismentling of 0.05 Conductor and Write Back to PDD Store Choglamsar

Dismentling of existing 8Mtr DP Pole, X-Arm with Insulators and Write Back to PDD Store Choglamsar with allied materials

THINLES ENTERPRISES (BID ID -157462)

M/S GYALSON ELECTRONICS (BID ID -157545)