Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 CrAccepted-Finance | ₹1.0 Cr | L1 | Accepted-Finance Lowest Bidder |
| 2 | L2₹1.1 CrRejected-Finance CHALITIA BERHAMPORE MURSHIDABAD | BERHAMPORE | MURSHIDABAD | WEST BENGAL | ₹1.1 Cr | L2 | Rejected-Finance 2nd lowest Bidder |
| 3 | L3₹1.2 CrRejected-Finance | ₹1.2 Cr | L3 | Rejected-Finance 3rd lowest Bidder |
| Sl No | Description | Qty | Unit | DAS TRADING CO L3 | AAP ENGINEERING L1 | G.M.N. ENGINEERING L2 |
|---|---|---|---|---|---|---|
| 1.00 | SITC of Condensing unit with minimum 102000 btu/hr or higher Cooling capacity, with 1 nos., Scroll compressor, 400V/3 PH/50 Hz Microprocessor based Controller of minimum 8.5 TR or higher nominal capacity with Green Refrigerant. (Make : Mitsubishi/O General/Mitshubishi Heavy Industries) | 16 | Nos. | 2,80,000 ₹44.8 L | 2,25,000 ₹36 L | 2,50,000 ₹40 L |
| 2.00 | SITC of Double skin construction Floor Mounting/Ceiling Suspended Air Handling Unit with Thermal Brake profile, Combination Filter ( Pre filter with 20µ Filter & Fine Filter with 5µ Filter and Hepa filter(Make: Zeco/AFI/Spectrum/Aeropure)) , Cooling Coil Section suitable for R410 refrigerant with 6RD DX Cooling Coil and SS304 Drain Tray, Direct/Belt driven Backward curve with EFF-1 motor(Make-Kruger/Haveals/L&T) , VFD(Electromec/L&T/Haveals) and SAD(Make-Dynacraft/Primier) , Fan-Motor Mounting Base, Drive Motor with V-Belt Drive Package, Vibration Isolators and Fire Retardant Flexible Canvas Connector. Air Handling Unit shall have 40 mm thick Sandwich Insulated Panels with Thermal Break Profile with Pre-Coated GSS Outer Skin and 0.6 MM Thick Plain GSS Inner Skin 0.6 and with Extruded Aluminium Frame Structure. VCD in Aluminium aerofoil construction to be provided in SA, FA, RA Openings. (Make: Waves/ Zeco / VTS)
AHU -6600 CFM /100 MM Static / 6RD DX COIL / Thermal brake profile /VFD
(An Autocadd Generated Drawing has to be approved before starting of any construction) | 8 | Nos. | 3,20,000 ₹25.6 L | 2,87,500 ₹23 L | 3,00,000 ₹24 L |
| 3.00 | SITC of Refrigeration Valves, Controls - Expansion Valves, Dryer etc. (Mk. Honeywell / Dynafoss) | 8 | Nos. | 8,938 ₹71,504 | 8,938 ₹71,504 | 8,938 ₹71,504 |
| 4.00 | SITC of Micro Processor based Control Panel for 8.5 TR AC Machine Compressor and its accessories. Provision for 4 KW VFD(Electromec/L&T/Haveals/Selec) for 1 nos. AHU's.EFF - 1 AHU motor provide for 1 nos. Motrized fire Damper provision future interlock Panel should consists with the following items:
1. 100 Amps 4 Pole MCCB for incomer, 2. 63 Amp 4p MCB-1 Npo. 3. 32 Amps 4 Pole MCB 1 Nos. Compressor unit/ODU unit, Indication Lamp for Main unit(R,Y,B) 4. VFD on/off Indication Lamp 5. Selector Switch for Compressor 1 6. Power terminal 150 Amps. for motor connection, 230V /24 volts 30 VA Transformer for Fire Damperf Controller. 7. MF meter with selector switch 0 - 60 AMPs, 8. CT 60/5 Amp Class -1 8. ON /OFF Push Bottom 9. Wall mounted type , 2 mm/1.6 mm thick CRCA sheet steel Fabricated duly painted powder coated Siemens gray.(415 V, 3Ph, 4 Wire , 50 Hz) top and Bottom Entry, Indoor type IP - 54 Housing,.(An Autocad Generated Drawing has to be approved before starting of any construction) | 8 | Nos. | 1,49,713 ₹12.0 L | 1,49,713 ₹12.0 L | 1,49,713 ₹12.0 L |
| 5.00 | Supply and fixing of UVC EMIITTER for the above IDUs for prevention of fungus in the cooling coils, The minimum UV intensity in the coils shall be 700-800 UW-SEC/CM2. The unit shall be UL.Listed (UL-1995) and it should be suitable to fix the same in 11TR & 5.5TR IDU (Make-Alfa / Ruks). | 8 | Nos. | 22,122 ₹1.8 L | 22,122 ₹1.8 L | 22,122 ₹1.8 L |
| 6.00Supply & Laying Hard / Soft drawn Copper Refrigeration pipe line for liquid and suction line suitable for R410 refrigerant & 13 mm thick Nitrile Rubber Insulation tube with supports & brackets as per direction of EIC. | ||||||
| 6.01 | a. Liquid Line (11/8" dia) with 13 mm thick nitrile rubber insulation with Al. Foil covered(Cu Pipe Make- Rajko/Ryoku/Nippon) (Insulation make - Accroflex/Suprime) | 280 | Mtrs. | 947 ₹2.7 L | 947 ₹2.7 L | 947 ₹2.7 L |
| 6.02 | c. Suction Line (5/8" dia) with 13 mm thick nitrile rubber insulation al foil covered(Cu Pipe Make- Rajko/Ryoku/Nippon)(Insulation make - Accroflex/Suprime) | 280 | Mtrs. | 411 ₹1.2 L | 411 ₹1.2 L | 411 ₹1.2 L |
| 7.00S & L of Copper Control Cabling FRLSH from Condensing Unit to Control Panel (make - Polycab / Havell's/Finolex) | ||||||
| 7.01 | a) 4 Core 6 sq. mm. (from AHU Panel to AHU) | 210 | Mtrs. | 378 ₹79,380 | 378 ₹79,380 | 378 ₹79,380 |
Tender Value
Refer Docs
EMD Value
₹2.0 L
Closing Date
6 Mar 2026, 2:30 pmClosed
SENIOR SUPERINTENDING ENGINEER
OFFICE OF THE SENIOR SUPERINTENDING ENGINEER (P.W.Dte) South-Western Electrical Circle PWD Compound, Midnapore, Paschim Medinipur
SITC of Air Conditioning System and allied Electrical Installation works at Antenatal ward and Post Natal Ward of Tamralipto Govt. Medical College and Hospital
2026_WBPWD_1003891_1
WBPWD/SSE/SWEC/NIQ144/2025-26
Open Tender
ELECTRICAL WORKS ORG
60 days
PURBA MEDINIPUR
Please refer Tender documents.
3 documents required · 3 mandatory
₹2.0 L
OFFICE OF THE SENIOR SUPERINTENDING ENGINEER
13 Mar 2026
11 Feb 2026
9 Mar 2026
11 Feb 2026
6 Mar 2026
13 Feb 2026
13 Feb 2026
SITC of Condensing unit with minimum 102000 btu/hr or higher Cooling capacity, with 1 nos., Scroll compressor, 400V/3 PH/50 Hz Microprocessor based Controller of minimum 8.5 TR or higher nominal capacity with Green Refrigerant. (Make : Mitsubishi/O General/Mitshubishi Heavy Industries)
SITC of Double skin construction Floor Mounting/Ceiling Suspended Air Handling Unit with Thermal Brake profile, Combination Filter ( Pre filter with 20µ Filter & Fine Filter with 5µ Filter and Hepa filter(Make: Zeco/AFI/Spectrum/Aeropure)) , Cooling Coil Section suitable for R410 refrigerant with 6RD DX Cooling Coil and SS304 Drain Tray, Direct/Belt driven Backward curve with EFF-1 motor(Make-Kruger/Haveals/L&T) , VFD(Electromec/L&T/Haveals) and SAD(Make-Dynacraft/Primier) , Fan-Motor Mounting Base, Drive Motor with V-Belt Drive Package, Vibration Isolators and Fire Retardant Flexible Canvas Connector. Air Handling Unit shall have 40 mm thick Sandwich Insulated Panels with Thermal Break Profile with Pre-Coated GSS Outer Skin and 0.6 MM Thick Plain GSS Inner Skin 0.6 and with Extruded Aluminium Frame Structure. VCD in Aluminium aerofoil construction to be provided in SA, FA, RA Openings. (Make: Waves/ Zeco / VTS) AHU -6600 CFM /100 MM Static / 6RD DX COIL / Thermal brake profile /VFD (An Autocadd Generated Drawing has to be approved before starting of any construction)
SITC of Refrigeration Valves, Controls - Expansion Valves, Dryer etc. (Mk. Honeywell / Dynafoss)
Supply and fixing of UVC EMIITTER for the above IDUs for prevention of fungus in the cooling coils, The minimum UV intensity in the coils shall be 700-800 UW-SEC/CM2. The unit shall be UL.Listed (UL-1995) and it should be suitable to fix the same in 11TR & 5.5TR IDU (Make-Alfa / Ruks).
Supply & Laying Hard / Soft drawn Copper Refrigeration pipe line for liquid and suction line suitable for R410 refrigerant & 13 mm thick Nitrile Rubber Insulation tube with supports & brackets as per direction of EIC.
a. Liquid Line (11/8" dia) with 13 mm thick nitrile rubber insulation with Al. Foil covered(Cu Pipe Make- Rajko/Ryoku/Nippon) (Insulation make - Accroflex/Suprime)
c. Suction Line (5/8" dia) with 13 mm thick nitrile rubber insulation al foil covered(Cu Pipe Make- Rajko/Ryoku/Nippon)(Insulation make - Accroflex/Suprime)
S & L of Copper Control Cabling FRLSH from Condensing Unit to Control Panel (make - Polycab / Havell's/Finolex)
a) 4 Core 6 sq. mm. (from AHU Panel to AHU)
b) 3C x 1.5 Sqmm (Control Cable FRLSH ) (between AHU & Condensing Unit)
Supply and fixing flexible double canvass connection for Ductable split air-conditioners.
Supply & Fixing Aluminiium Continuous Grill. (Make-. System Air/ Premire /Air Master)
Fabrication , supply, Installation , testing & commissioning of following AL sheet(NALCO or as per choice of EIC) guages duct complete with supports, flanges, turning vanes for supply air / return air duct erected with supporting rods, fustners, nuts etc.
a. 22 SWG Ducting
b. 24 SWG Ducting
Acoustic lining of duct work with 9mm thick Open shel Nitrile Rubber. (K-Flex / Amracell / Supreme)
Supply & fixing 9 mm thick closed cell fire retardant Foil face nitrile rubber thermal insulation for Duct (K-Flex / Amracell / Supreme/K Flex)
Drain Water piping work out of PVC / HDPE hared pipes with Insulation, fitting, accessories, bends, elbows, tees, flanges, tappings, wall sleeves, hangers, supports, anchors.(make-- Finolex/ Supreme) 25mm.Dia
Charges for lifting of Indoor & Outdoor units & Scaffolding Arrangement
Charges for Assembly of AHU in Plant Room
Supplying, fabrication & fixing 3Nos. M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) of 1m length for making platform for installation of outdoor unit of 8.5 TR / 11.0TR ductable split AC incl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete etc. fabricated with 2Nos. horizontal angle of 25 mm x 25 mm x 5 mm of 1m. length incl. S&F of safety cage made of angle (25X25X5mm) and flat (25X5mm) iron with necessary painting incl. shade arrangement with corogated PVC shade with proper clamping arrangement
Supply and installation of Motrized fire Damper in Al.construction & with Fusible link.
Supply and installation of Motrized Damper in Al.construction
SITC of Treated Fresh Air arrangement with multi stage filtration, Control damper, Actuator, complete with linkage control, Bird screen, etc.
Supply & Fixing of Limit Switch
Supply & Laying 2 Core 1 Sq.mm Power Cable for Limit Switch to Motozied Damper
Part B:- Electrical Installation Work
Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS.
19 mm dia 3 mm thick
25mm dia 3 mm thick
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS.
a) 2x(4 sqmm)+1x (2.5 sqmm)
b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
S & F solderless Copper socket by crimping of Copper wires.
a) 2.5 sq mm
b) 4 sq mm
Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes(in mm ) flushed in wall & 3 mm thick bakellite cover as per GS
Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS as per direction of EIC.
8 Way ( Up to 160 A ) Make -L&T,Enclosure- (LTVD08MGN) /Schneider-Enclosure-A9HVD08M
Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [ Make - L&T / Schneider) as per direction of EIC.].
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make-L&T/ Schneider/Siemens/Crabtree) as per direction of EIC. ]
Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 as per GS
8 Way (Vertical)
Supplying and fixing 415V TPN SFU with sheet steel enclosure of following rating on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.( Make - L&T /Siemens/Havels)
a) 125A, TPN SFU [4(a)/D-3]
Supplying and fixing sheet steel (16SWG) cable end box on TPN SFU enclosure as per GS
Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Nicco/ Gloster/KEI/Polycab]
4 Core 70 Sq. mm
Laying of 3/3½ core cable of following sizes on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting as GS.
from 50 to 70 Sq. mm
Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support 200x50x1.25mm (18SWG)
Laying of cable as below, on existing cable tray and binding with suitable size GI wire.
Upto 50 Sq. mm.
Supplying & fixing medium gauge 100 mm Dia. GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required and Laying of cable as below, on existing cable tray and binding with suitable size GI wire. [F-6/11.g]
Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4/3.5)Core as per GS.
4Core 70 Sq. mm
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS
Excavation of soil for installation of Earth Electrode and filling & ramming for Morrum Soil.
Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS
No.-4 SWG
No.-10 SWG
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall as per GS
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
Tendernotice_2.pdf
PDF • 1.83 MB
BOQ_2461435.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid