Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
9 Sept 2025, 10:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mysore Urban Development Authority
MUDA office
Estimate for Supplying of Lighting system and Generator on Hire Basis at Torch Light Parade Inner Ground -Drone Show-2025 for 2 days and the Estimate is prepared using Dasara Approved Rates -2022 of Superintendent Engineer, PWD, Mysore Circle, Mysore
MUDA/2025-26/EL/WORK_INDENT210
MUDA/2025-26/EL/WORK_INDENT210
Open
Electrical
Electronic Documents, First(One Cover)
MUDA Commissioner Office Mysuru
3 documents required · 3 mandatory
₹630
₹50,000
2 Sept 2025
2 Sept 2025
9 Sept 2025
Estimate for Supplying of Lighting system and Generator on Hire Basis at Torch Light Parade Inner Ground -Drone Show-2025 for 2 days and the Estimate is prepared using Dasara Approved Rates -2022 of Superintendent Engineer, PWD, Mysore Circle, Mysore
Hire charges for supplying wiring and maintaining suitable size L.T panel board with pilot lamp arrangements with the following switches I 200Amps TPST switch with pilot lamp and neutral ---- with all...
Hire charges for supplying and fixing of control panel board to fix various MCCB's and control switches of size 12' x 16' & wiring with suitable capacity as directed by Engineer in charge. All the wir...
Hire charges for supplying fixing servicing and maintaining of following MCCB suitable to operate on 440Volts 50 Hz AC supply and wired completely II) 500 to 750 Amps ---- with all lead and lift and a...
Hire charges for supplying, erection, wire and servicing bus bar type distribution box suitable for 200KW (600A) to connect from 240Sq.mm, 4 core incoming UG cable and shall have at least 10 outlets t...
Hire charges for supplying, laying, connecting PVC insulated armoured / unarmoured UG cable with necessary cable glands sockets etc as required III) 3.5 x 70sqmm ---- with all lead and lift and as per...
Hire Charges for Providing installing and removing of PVC flexible unarmoured copper control cable of approved make 3Cx1.5sqmm ---- with all lead and lift and as per directions of Engineer In charge o...
Hire charges for supplying and running circuit service main with necessary messenger wire and reel insulators and maintaining the same using. 2 of 6sqmm/ 10sqmm PVC insulated sheathed alluminium wire ...
Hire charges for supplying, fixing and releasing after festivity, change over switches of ISI mark of the following capacities. 630 Amps ---- with all lead and lift and as per directions of Engineer I...
Hire charges for supplying, fixing and releasing after festivity, change over switches of ISI mark of the following capacities. 250 Amps 4 Pole ---- with all lead and lift and as per directions of Eng...
Hire charges for supplying, fixing and releasing after festivity, change over switches of ISI mark of the following capacities.63 Amps ---- with all lead and lift and as per directions of Engineer In ...
Hire charges for supplying, servicing and maintaining of 1KW halogen lamps and release the same after festivals. The wiring shall be by 7/20PVC copper wire, 660V grade from each fitting on cross arm. ...
Hire charges for supplying and providing earth electrode as per standard Specification. ---- with all lead and lift and as per directions of Engineer In charge of work
Hire charges for supplying laying connecting PVC insulated armored / enamored UG cable with necessary cable glands sockets etc as required. 3.5 x 240 sqmm ---- with all lead and lift and as per direct...
Hire Charges for supplying laying connecting PVC insulated armores/ enarmored UG Cable with necessary cable glands sockets etc as required 4x25 sqmm ---- with all lead and lift and as per directions o...
Hire charges for Supplying, Erection, commissioning and dismantling of 500KV / 433Volts D.Tr. On existing masonry platform with necessary distribution wiring using 240 Sq.mm, 3 1/2 Core, 1.1KV class U...
Hire charges for supplying, erection, commissioning and maintenance of 4 x 400 KVA Diesel Generator sets at Bannimantap Torch Light parade ground (Including fuels charges and cable works from DG set t...
E) DG SET - for 2 days Hire Charges only for Providing installing and removing of DG sets and connected accessorieds. The DG set should be maintained for all the 24 hours with ncessary diesel for runn...
Labour charges for erection of 11 Mtrs. MS round pole duly digging the pits to a depth of not less than 1/6th of the pole length releasing and return the same after festivity. ---- with all lead and l...
Labour charges for fixing of special cross arms and braces of various sizes complete set and releasing and returning the same after festivity. The cross arms and braces will be of size varying up to 1...
Labour charges for collection of materials from CESC store to work spot and after festivity returning the same to store including loading, uploading and transportation charges. ---- with all lead and ...
Errection of Temporary shed of size 6.00 x 2.50 with 40 mm dia GI pipe firmly fixed to the ground including excavation, providing CC 1:4:8 to a depth of 0.30.shed to an height of 2.70 m in front and 2...
Hire charges for providing 10 feet x 20 feet LED screen for Dasara event of Torch light Parade including scaffolding, cabling, live fielding and transportation charge ---- with all lead and lift and a...
Hire Charges for Providing installing and removing of 36 Watts CFL ---- with all lead and lift and as per directions of Engineer In charge of work
Painting of existing street light pole after scrapping the old paint and painted with suitable colour enamel/silver paint including coping/footing of the pole. Upto 5Mtr Street Light pole. ---- with a...
Testing, Meggering, Crimping, attending to cabel joints ect., of all existing LT UG Cables ---- with all lead and lift and as per directions of Engineer In charge of work
Testing and Crimping of Panel Boards ---- with all lead and lift and as per directions of Engineer In charge of work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw2 210.doc
Tender Document • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .