PROVIDING BASIC AMENITIES AT VPC NO-330/1 NEAR SHRI VIRUPAKSHALING DEVASTHAN IN NIPPANI TOWN OF NIPPANI TALUKA .

GF AND WALKWAY BRIDGE WORK

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 8%

2.4 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3...

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

Addendum I -Additionalities for formwork, Centering & Scaffolding " For Plinth Beams of Buildings " at 50%

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60%

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50%

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

FIRST FLOOR WORK

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60%

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45%

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50%

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross-sections 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be m...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...

Supply of PVC pipe - OD 25mm and 10 Kg/sqcm

Supply of PVC pipe - OD 32mm and 10 Kg/sqcm( Vol.5, P.No.A-44,I.No.654)

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092PPR Double Union Ball Valve 20mm

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092PPR Double Union Ball Valve 25mm

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and DIN Standards 8077/8092PPR Double Union Ball Valve 32mm

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded Elbow 20X1/2mm

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded Elbow 25X1/2mm

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded Elbow 32X1/2mm

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded Elbow 20X1/2mm

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded Elbow 25X1/2mm

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded Elbow 32X1/2mm

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded TEE 20X1/2mm

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded TEE 25X1/2mm

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Male Threaded TEE 32X1/2mm

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Female Threaded TEE 20X1/2mm

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Female Threaded TEE 25X1/2mm

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and DIN Standards 8077/8092PPR Female Threaded TEE 32X1/2mm

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore Horizontal

Providing and fixing gun metal non- return valve of approved quality (screwed end) :32 mm nominal bore Horizontal

Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Supply of PVC pipe - OD 110mm and 6 Kg/sqcm

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments75 mm dia PVC Elbows

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments110 mm dia PVC Elbows

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ringconforming to IS : 5382, leaving 10 mm gap for thermal expa...

13.31 Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing th...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

13.18 Providing and fixing PTMT stop cock of approved quality and colour 13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g

12.59 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto...

12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.12.69.2 125mm

12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary scre...

12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :12.73.1 125mm